Reviews
I think it's solid for a dedicated Mini Vice.
Micro/Milling Table MF70 (PROXXON item number:27120) I bought it for.
It is also used as Mini Vice with Single Body, and the looseness after sandwiching with Small Type is not seen now.
It is also used for simple electric Drill hole drilling and Tap cutting.
It is very useful.
View detail
A little disappointing.
Bought this to make washing my own car (2LClassSedan) easier.
As a result, I felt that for the Cost....
I bought it to make it a little easier to wash the roof because it's a Large one, but the shape doesn't allow for a lot of force. the Reach is long so you can stroke it more widely, but it doesn't allow for a lot of force...
Also, the lather of the car wash shampoo was not very good, because it is Sponge type. I wish there was a Mouton version.
However, it might be useful if you are a MINIVan type such as High ace which is not reachable at all.
If you can reach it, but want to make it a little easier, I wouldn't recommend it.
View detail
Very useful when washing the car.
It comes in handy when washing the car.
It is a very ordinary Bucket. The other thing is the durability, the Bucket that I used until now has cracked and blown powder by the aging, so I'll see how this Bucket is.
View detail
Necessary for diagnosis of ignition system failure
Necessary for measuring instantaneous voltage in ignition system failure diagnosis
I know you have to connect it to the tester, but if you don't use the Type, it might be a bit troublesome.
It seems to be set in SST of each manufacturer, but this is probably cheaper for the same etc. product.
Well, actually, while we're waiting for it to come in, we're going to have to diagnose the problem before we can diagnose it. (Stator breaking) But if you want to know if the ECU is broken, Stator, Direct Ignition, or disconnected, you don't have to worry about it.
View detail
It can be scrubbed.
This is the best for removing dirt from undercarriage and tire. View detail
dull
[How is it used?
I use Vise to fix parts that I don't want to scratch or deform.
How was your experience with it? [Points to note]
I can grab it, but the Material is too soft to do any fixing.
If you are pulling with a Gold cutting saw across a Bolt or similar object, it will tilt and the cutting surface will be slanted.
The same is true if you are grinding with File.
You will need to reposition the child several times along the way.
I've been using it for a while now, but I've given up on it because I can't find anything else to replace it.
Because it is resin, you must not do it because it melts by heat when you sand the grasped genus Gold. It will be irretrievable.
How did it compare to other products?
I also have one made by Straight (discontinued) which is made of Aluminum with Rubber board attached, but it's not as good as this one.
[Opinions and requests to Manufacturer
Material should be made of copper, but I don't think it will be expensive.
At least, if it is made from 1000 aluminum plate, it can be gripped Firmly and it is strong against heat.
View detail
Reassuring to have for machine maintenance
It is useful for re-cutting before recoil processing or when the condition of the screw mountain has become bad.
It is not as good as the quality of the high-end products including the attached Handlebar, but it is better than the Quantity:If you thought it was your first one for home use with Set, I think it's enough for your needs.
View detail
Cospa might be good
0.It is possible to measure from 0.01mm, and it is good that it is possible to measure by the unit of 0.01mm by combining two pieces. I use it to adjust the valve clearance of my NC30. View detail
One use and you're a wreck.
I used it to strip the Gasket from the Cover when I changed the Clutch.
If you use the Cover side and the Engine side, it is already tattered.
I divide them as disposable.
View detail
Easy to remove and convenient.
The claws of the Small Dice Coupler, which are difficult to remove, can be pushed down firmly and removed easily. I like the Coupler because there is less risk of injury and the Coupler can be removed effectively. View detail
The Grip can be easily removed.
You can easily remove the remaining Clips on the body side after removing the DoorLining etc. without damaging them. It is very convenient for you to use it with its easy to hold shape and length. View detail
Used to clean the Wheel
Used to scrape out Screw Lock at the time of Brake Disc replacement
The carburetor cleaning can be used from thin size to thick size Of course, it's an Almighty product that can even be used to clean screw holes
View detail
Essential for air tools
When you install the Air Compressor in Garage, you'll need it to connect to Reel, and you'll be able to use it to get the Air Compressor to work It is a normal Coupling with no special features There is no special feature and it is ordinary Coupling View detail
Hard to grip
The price is low and the Wire is hard, so it's good for Rust drop
However, the grip part is simple, just a steel plate pressed into a U shape, so you need to put some force into it It hurts when I'm dropping Rust and it digs into my hand
Wearing work gloves or wrapping an extra piece of cloth around the grip will not do much good
Other than that, there are no other problems
View detail
I think it's a good Ideas product
When you apply the Rim stripe while the Wheel is still attached to the body of the car, it is very easy to use I think I removed the Wheel and stuck it on, so I sprayed enough soapy water on it and stuck it on by hand It was easier to put it on However, I'm sure it varies from person to person, so the price is so cheap that you can buy it as insurance Maybe it's good View detail
It was useless..
I do not know in other Size, it was useless for 12-inches.
Seal is solid, so 12-inches it is not difficult at all to paste by hand normally.
View detail
It was not very useful..
When fingering a car or Motorcycle, it takes time to remove the Coupler all the time, so expect improvement and purchase. I used it for some Coupler work, but it is not useful at the moment. View detail
Convenient
There are several types of Adapter, and Motorcycle other than Yamaha can also correspond. Regrettable that there is no M10 specific Adapter of Internal thread.
I made it myself. Afterwards a little expensive against the Gold amount. I think that it will not be damaged, but work is troublesome so that Crank will not turn because of the hands, but it is satisfying because it is not a frequently used tool.
View detail
Tappet adjustment, PlugGap adjustment - - - For each place adjustment
Purchased for SR 400's Tappet adjustment.
Also I used it before because I had rust and bending.
The deciding factor of purchase is the number of sheets and price!
At this price this number is not quite enough.
But - - I do not use it w
In addition, since it can be used for adjustment of PlugGap and measurement of various parts of Engine at Overhaul
Would it be better to have more sheets - -
At the time of opening, the root fasteners were loose and it was nearly RoseRose.
There is no problem when tightening again.
View detail
It is easy to have
I bought it together to paste Rim stripe. It is chatty than I thought.
It cracked on the way and reinforced with SEROWTape. But I think that it is easier and shorter to buy it because it is cheap.
View detail