Reviews
Paste work will be very easy!
【What made you decide the purchase?】
When pasting Rim stripe, I thought that it was absolutely easier.
I used it also in the explanation movie of pasting, so I bought it not to fail.
【How was it actually used?】
As you can see in the Instruction Manual and the commentary movie, first let the tip of the sticker pass through the hole of Gauge, then just slide this Gauge and it was attached easily and cleanly.
【Was it difficult to install? (Hard parts case)】
Thanks to this Gauge, sticker pasting was very easy.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Since this Gauge is for 4 mm and 6 mm Rim stripe, processing like image is required to use for 10 mm Rim stripe. (I processed Gauge for 6 mm. )
In this Gauge, the width of Gauge for 4 mm is 5 mm, the width of Gauge for 6 mm is 7 mm, and a hole wider 1 mm than the width of Rim stripe is opened.
So, so that it is 11 mm wide, mark with the ruler and a pen in the inside of the Gauge and cut it with Cutter Knife. (Cut it with FreeHand, but it can be used without problems. )
[Is there anything I was disappointed about?]
Actually I wanted to stick the sticker all over the outside of Rim, but with this Gauge the pasting position will be full inside.
It is safe not to go against the movement of Gauge quietly because the Line will be distorted when trying to stick it to the outside by force using this Gauge.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want a Gauge to be put on the outside as well.
Also, if you can also sell Gauge for 10 mm you can save time of processing.
【Have you compared items?】
None. There is no substitute.
[Others]
Because it is a small product, you tend to lose track of it when you are absorbed in pasting work.
Also, when working outdoors it is necessary to be careful as it will be skipped if a strong wind blows.
View detail
Even without it you can paste it - - -
I can not substitute with cardboard or something, though - - - It is certain that there were fewer mistakes.
Because the price is also cheap, we recommend to purchase with MDF's Rim tape.
View detail
Time reduction!
It might be a good idea to grasp the Brake lever and exchange the Fluid, but if you want to shorten the time it would be better to use this product. Also I used it for Fluid exchange of Big scooter, but this product was very useful because it does not reach Rear. View detail
Required Items
It is very useful when sticking Rim sticker.
Rather, I think that it is difficult to stick beautifully if there is not this.
(Even if there is this, it is difficult to paste it... )
Since it is not a Large amount, we recommend Recommendation for purchase when purchasing Rim sticker.
View detail
Rim tape essential item!
The workability is different if there is this and there is not!
If there is nothing, it is only to stretch as a jiwiwa with the spacing between Rim outer circumference intact, but it is a very difficult technique for my clumsy person. This Gauge makes it easy to paste it as it is a guide of the tightening position.
View detail
Used for CUB90DX
Tappet sound has become considerable, so I tried to adjust and bought it.
Thickness Gauge was what I felt,
Tappet Looking at the site of the person who is adjusting, it was a tool to measure Clearance.
It was truly amazingly fluent and something like a plate, thought that I should use it like this.
This time 0. It is the use of 05 mm.
Since it enters in a bent state, it was easier to work than I thought, but since it is fluent at all, there are traces left when I tightened.
The price is not so expensive, I felt that Torque had uped when I adjusted Tappet, so I made a rating of 4.
View detail
Line tape is a necessity
It was simple and stuck well. When I pasted it so as to slide the Edge of foil, even an amateur could be successfully pasted. I think that it is a necessity when pasting Line tape. View detail
Also useful for car maintenance.
Maintenance of Motorcycle is used when the lid of the Master cylinder and the Float chamber of carburetor are stuck or when peeling Crankcase. When cars are peeling off the interior Large deformable treasure.
The price is also cheap, and the cap is attached to the tip of the tool, and the danger of damaging the tool box made of Gold genus is also low, etc. It is an excellent piece in Cost performance.
Good feeling of Grip's feel, 1pc. It is a useful tool in many directions if you have it.
View detail
I like it very much.
I used it for Pillar part of Black gloss with Plastic, but clearly speaking, Compound function is almost none. However, the Small wound which I wanted to polish and drop was spectacularly hidden and glossy.
Just wipe quickly (* '▽' *) This is easy and good! It is the best as there is no hard work to polish.
I have not washed it yet, but even if I fall down with several car wash, re-construction is extremely easy. Moreover, like a polish, there is no failure !!
It seems to be quite possibly with one, but it seems better to buy it as it is likely to be used in many places.
I also tried TV's REMOTE CONTROLLER and furniture, but it is shiny and sticky. Strange. It was nice to meet you..
View detail
cheap.
Cost performance Good!
I bought it together with Rim stripe.
Thanks to this, I was able to stick Rim stripe easily even if I was clumsy.
I think I felt a bit difficult if I had no kore.
View detail
Simple and difficult
I thought it would be easy if I added it with this tool, I challenged after watching Video on MDF's HP.
If you put too much water it moves too much and you do not attach the part to be bonded well ... and it was various Large strange. Even if I use a dedicated tool I can not go well unless I get used to it.
It is convenient to have this Tool itself because it is possible to Fitting to Rim to a certain extent to some extent, but it was quite difficult to stretch it to just this. After wearing it, it was distorted pretty well when turning the wheel.
View detail
Hot knife set
I did Ladder home center to do Plastic processing, but I was at a loss for not going anywhere but I was glad that I could purchase on Webike. Product price was also cheap and it was user-friendly as I thought. Just my way of using it I can do BALI on the cut surface quite well. Knife's melted plastic solidifies and it becomes BALI.
When we cut this BALI with Hot knife, BALI can be done elsewhere so only BALI eventually cut off with Cutter Knife. You may not be able to do BALI if you get better.
View detail
I used it for 8 mm
Since the Rim sticker was 8 mm, we could handle even 8 mm if we did the work with Cutter ('∀ `)
I thought that sticking the Rim sticker was really Large strange, but I was impressed because it was quick and easy ('∀ `)
View detail
Because the hands are clumsy
This time, since I bought Rim stripe 6 mm, I bought it at the same time.
Since my hand is clumsy, I was not confident enough to stick it so it was good to purchase.
There was also a movie in the item description, so it was easy to understand Large change.
It might take a while if it was not here and it might have been messed up.
It was more expensive than the price.
View detail
Things I was curious about!
Things I was curious about before!
I have not used it yet
Looking at the impulse of those who used it
I bought and bought it!
Items that are very handy for those who do maintenance on their own
I think whether it is.
View detail
It is an ordinary waterproof paper
I tried purchasing with the meaning of shipping fee adjustment.
Although it is a bit small, it is cheap so it is saved if there are no plans to use only a small amount.
Usability is the ordinary Water-resistance Paper itself.
View detail
Tool you want to keep
It is an essential part in the interior decomposition of automobiles. However, Motorcycle is also convenient when there is an emergency.
I think that the price is also relatively reasonable, so I'd like to put it in the tool box.
When you want to slightly widen the clearance of Plastic cover, something tends to do with Slotted screwdriver or something, but then it is easy to get scratched. This tool is hard to scratch. Although impossible if it is impossible.
If you use it well you can do a beautiful job.
View detail
There are things that can be done with this tool
It is more suitable for removing the PlasticClip from the Gold genus Rim. But when you want to scratch without scratching as much as possible, this is recommended. Depending on how it is used, this is just as good as it is a little softer than others. Of course it will break if impossible..
There are cases where it can be used as a spatula besides Rimber if you think of usage.
I definitely want to put one in the tool box.
View detail
Dedicated sticking Gauge is easy
Large It is cheaper to install it. The narrow Rim stripe will bend soon, so I think the paste Gauge is essential.
The price is also reasonable, and this product is with Tape of 5 to 6 mm width.
View detail
Sharp blade
Since the blade is sharp, I was able to remove Gasket BALIBALI. Also because Grip is Rubber, it was easy to add power.
It is a good Size for Gasket peeling such as Clutch cover.
View detail