Reviews
Spring hook
It is used for spring removal and attachment of the Exhaust System.
The Type is a little long, so it seems to be easy to apply force when pulling, but in some places the long length gets in the way and makes it hard to work with.
It is good that it can be split into two parts, can be removed, and can be pulled by swinging it at an angle, but it turns too much and cannot be pulled properly, making it difficult to install the spring hook.
View detail
Just right for disposable
[How is it used?
Used to clean parts during Restore of TZr50R.
I bought it because the price was low and the tips of the hairs I had before were becoming stiff.
How was your experience with it?
It was easy to hold and use.
The small size also makes it easy to clean the smallest of areas.
However, it may not be suitable for cleaning Large objects.
How did it compare to other products?
Although the quality is much lower than the slightly more expensive Brush, it was great for a simple cleaning of the Sunday mechanic. Especially when it comes to Restore, these supplies are cheaper and larger in quantity than in quality.
[Points to note]
There are three types of bristle tips, but use them with caution, as they may damage parts if used incorrectly.
View detail
For cleaning.
I bought it because it seems useful for cleaning carburetor and for cleaning tight places.
Quantity:1 Set of 5pcs. so it can be used in different places, which seems convenient.
View detail
I think it's cheap
Personally, I thought it was inexpensive.
It feels good to use, polishes properly, and is convenient to have.
I would buy it again.
View detail
For cleaning
Quantity:1 Set of 3pcs. and the price is low, so you can use it without worrying.
The Plastic section is also easy to hold and has a nice elasticity.
It is cosmetically good, so it is enough if you can hold it at some level.
View detail
Versatile Holding Tool for your Maintenance Needs
About quality and texture: I am happy with the quality of the band holder from ProTools, made from a steel construction with a PVC coating over the band to help improve it's hold. About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts. Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the band holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job. Difficulty of installation: The process to install takes a few minutes, place the band holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do. Cost performance and comparison with other products: Good costing as this is a quality made band holder from ProTools that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter. View detail
Easy to use
Brush is shaped for easy gripping and holding.
The handle is not Gold, so it is not cold and comfortable to the touch, so it is not a burden to work with.
Brush is a little hard, so it rubs well and is effective in removing stubborn stains.
View detail
Easy to use
Not bad
Spring can be conveniently installed and removed.
It is strong and will not break even if it is used for strong springs, so it can be used for exhaust springs and side stand springs.
It is safe to use
View detail
Useful for more than just Motorcycle!
[How is it used?
My boss at work had one and lent it to me once, and when I picked up something in a tight spot, I decided to buy it.
I immediately bought one myself and am using it.
How was your experience with it?
When stored, it is compact and unobtrusive, but when extended, it is quite long and can pick up objects at a distance.
One item is useful not only when servicing your motorcycle, but also in everyday life.
The tip is Magnet, so it is versatile enough to be attached and picked up, or hooked and picked up.
This is one product I wish I had known existed and bought earlier.
It is inexpensive, so it is useful to keep it in your tool box in case of emergency.
View detail
Nice to have one!
It is a useful tool for various Situations, such as when repairing objects that have fallen into gaps between vehicles or rolled under furniture.
It is not expensive, so it is very useful to have one in your tool box. other than motorcycle maintenance, it is also very useful for retrieving items that have fallen through the cracks in your desk, or for pulling up LANCable or Outlet.
It is really useful, so please buy one.
View detail
rust removal
I bought this to remove rust from screws and other parts.
The price is reasonable, and the brush part seems to be sturdy and can be used to some extent.
View detail
To relieve frustration
[How is it used?
I'm sure we've all had the experience of dropping a bolt or nut into a gap in the frame while servicing a motorcycle, only to have it end up further back when you try to remove it.
I dropped my Battery Bolt during maintenance the other day and it took me 5 minutes to find it. I bought this to save myself the frustration.
Was the one you received as per Image?
I couldn't really tell from the product photo, but the product I received had a place to hang it.
How was your experience with it?
I lifted a 27mm Socket that I had on hand, and it lifted beautifully.
27mm is surprisingly heavy, and Magnet's power is quite powerful.
The only problem is that the stretching part is weak, so if you try to lift something heavy, it will automatically stretch under the weight. (Lol)
[Points to note]
The Magnet is rather powerful, so I think it's safe to avoid using it near a smartphone or PC.
How did it compare to other products?
I think there are similar pickup tools in the 100 yen shops, but I chose this product because I felt the magnet was not strong enough.
I haven't compared them directly, but...
【Review】
The power to pick up is perfect.
The only thing I would like to see more of is the strength of the elastic part.
View detail
It can be used for any Spring.
Convenient installation and removal of the spring, and easy handling of hard and strong spring, easy to hold and safe to use for both exhaust spring and side stand spring. View detail
My hands don't get tired easily.
The brush is easy to grip and hold, so your hands will not get tired while working. The brush is a little hard, so it is effective for removing stubborn stains in areas that cannot be scrubbed too hard. View detail
Convenient for Tire replacement
It is a must-have tool for WheelBalance for Tire replacement, as it makes the removal and hammering of the balancer weight easier and more efficient for everyone. View detail
Hard to grip
The price is low and the Wire is hard, so it's good for Rust drop
However, the grip part is simple, just a steel plate pressed into a U shape, so you need to put some force into it It hurts when I'm dropping Rust and it digs into my hand
Wearing work gloves or wrapping an extra piece of cloth around the grip will not do much good
Other than that, there are no other problems
View detail
It might be better than nothing ...
Originally intended purpose was to buy Clutch Spring of CYGNUS for replacement, but it was too hard for power to enter and eventually could not be used. However, it was enough for attaching and detaching Spring such as Exhaust System, so it was easy to work depending on the place to use. View detail
It is convenient to have it in Maintenance of Clutch type !!
Purchase for exchange of Clutch Spring of CYGNUS X SR 1YP.
It is convenient to have it when Belt drops in.
When exchanging Center spring and Clutch Spring
With or without a thing, the feeling of tiredness of the finger is completely different.
If there is one, I will recommend it as something useful.
View detail
To drive and remove Wheel Balance Weight
PROTOOLSBalance Weight Hammer is used for Tire exchange to remove OEM's driven balance weight.
Because it is for Motorcycle, since the width of the part that grabs the weight is about 2 cm and it is Small, it is easy to use.
Weighing measured at 436 g, there was a response, Grip's Red Vinyl Cover also slid and gripped feeling well.
Also, on the Grip side of Joint, there is a blade that can cut pasted Plate Weight.
The part of Hammer that drives Weight has a rounded and bulged shape from the center, and it is considered that it is hard to scratch the surrounding Wheel when driving Weight.
The other day, we used ZYR 1400 Tire to remove Weight when exchanging, Balance was pasted Weight.
However, the weight attached to Rim stands out (It may be a matter of concern) Since it can not be helped, I am planning to change it to the driving weight of the OEM soon.
Personally, it is very useful.
View detail
Carelessly, is a Piston Circlip dropped into a Crankcase and aren't those who were troubled? It is an ironbound rule of maintenance to fill a Dustcloth in a Crankcase so that the Circlip may not be dropped, but.A Dustcloth flies by a wind during a break,
Carelessly, is a Piston Circlip dropped into a Crankcase and aren't those who were troubled? It is an ironbound rule of maintenance to fill a Dustcloth in a Crankcase so that the Circlip may not be dropped, but.A Dustcloth flies by a wind during a break, he does not notice that, but work is done, a Circlip is dropped to a Crankcase, and it has the bitter experience I got the Shop to help (it does not come out, even if it uses reverse!).At the Shop, it picked up by the same thing as this product.
It came to purchase taking advantage of it.
Although it is not a thing used so frequently, it is wiser to have not been a high thing, and considering the difficulties which carry an Engine to a Shop, to have.
View detail