Reviews
nonfunctional
I understand that you use a syringe to decompress the Tank and suck it out.
It does not work at all.
In the end, it was a normal Air extraction while holding Lever.
View detail
Bottle will be dented.
I purchased this product because I wanted to do the Fluid replacement myself.
As per everyone's impressions, use a syringe to set the Bottle's air pressure.
If you lower the Lever, the Bottle will be dented.
It may be better to work while niggling.
View detail
If you want to remove the Exhaust System, here it is.
It is very useful for removing the Exhaust System, Chamber, and Exhaust Manifold Spring. Before I bought this product, I had a hard time removing them with the radipen, but with this product, I was able to remove them in one shot. I wish I had bought it earlier!
The T-shaped handlebar is easy to grip.
Is the hook a little small?
View detail
Read the instructions for use and use tools correctly!
This tool is ideal for brake fluid replacement.
A Base is also included to prevent the Tank from falling over.
Fluid can be firmly removed by applying a certain amount of pressure.
However, care should be taken not to apply too much pressure, as the Tank may dent and break.
Since brake fluid is considered industrial waste, please dispose of the waste fluid after replacement at the nearest service station, motorcycle shop, or PartsShop.
View detail
strong
I used it to remove and install the spring from the pipe of the Full Exhaust System.
It was easy to work with because it was sturdy and easy to hold.
The easy-to-grip grips make it easy to apply force and pull even strong springs.
View detail
A must-have for Full Exhaust System
This tool is an absolute necessity for removing and installing the spring of the pipe of the Full Exhaust System. The grip is easy to grip and you can put a lot of pressure on it and you can pull the strong spring easily. View detail
very good
My car is KAWASAKI’s NINJA 400, model year 2019. I bought this to change the brake fluid. After changing the brake fluid, it is inevitable that air will get in. The manual exhaust was used before. After using this, it feels very convenient. The air will come out as soon as I use a syringe. Much faster than manual. In order to enhance durability, a glass bottle was replaced. ---------------------------------------------- My car is 400 , the 2019 models of KAWASAKI NINJA. Buy this is to change brake fluid, brake fluid change is inevitable after you will go in the air, before all manual venting, with the feeling after this very convenient, with a syringe pump are out on the air. Much faster than the manual. In order to enhance the durability, on the change of a glass bottle. Powered by Google Translator View detail
Brake fluid exchange is easy to do
Brake fluid can be easily changed Easy to bleed air
It would be even better if the hose was installed with a little more thought
View detail
Air bleeding is usually quicker!
Double disk If you are planning to use it on a car, it is usually faster to do it only with Air hose.
When pulling out with a syringe, Tank collapses at about 10 times (lol
Breather Valve will do the air bite and do it ~
Oh, I wasted another waste ...
View detail
Tank loses negative pressure ...
I used it for Brake fluid exchange of Daytona 675R.
Usability is not bad (It is better not to use Cylinder but Gun type negative pressure Pump better ...) Although it is fatal that the Fluid Tank of the polyethylene container loses the negative pressure!
If I lose to negative pressure I will not get out of Fluid and if I relax BreederValve to make it easier to remove Fluid, I will remove the air ...
Since there was no choice, we decided to exchange the Brake lever in the usual way to negotiate.
Just by replacing Tank with a material that can not defeat the negative pressure, ease of use improves greatly, so I expect improvement.
View detail
Reduced working time!
【What made you decide the purchase?】 Other people's impressions
【How was it actually used?】 Convenient.
[Is there anything I was disappointed about?] Troublesome when throwing away waste Oil
【Hope for Manufacturer - Please tell me if there are any improvement points】 I want a longer Hose for Master bleeder.
【Have you compared items?】 None
Purchase in anticipation of shortening the operation time of Fluid exchange and bleeding
I used it immediately.
Until now Lever grew. It took time to open the bleeder and tighten it
Hose mounting. Bleeder liberation. Syringe kit. Blur - - - the end!
Hurry! Hurry!
Reservoir Tank became empty and I put Air in too much
But easy without air!
It is convenient. The frequency of Fluid exchange surely rises.
I make a negative pressure inside the tank with a syringe, but since pressure returns when pulling out Fluid, it is necessary to operate the syringe several times. (Tank will collapse if negative pressure becomes too much)
When waste oil is thrown away Cap is fixed to Band a little troublesome.
Those who are blowing out Air with Lever, work time is unnecessary!
Let's buy this !!
View detail
It is easy to use
I used it for the exchange of Rear caliper OH & Hose of vmax 1200. Reserver Tank including Line almost Almost all Start from Fluid Inspiration, but how to use according to Instruction Manual (Connect this Changer to CaliperNipple, put Fluid in Reserver tank and pull it with Changer from Caliper side) It was really quick until Pedal got a response. Normal bleeding is necessary from there, but it will not take so much time from this state anymore.
Also, unlike the product photo at the moment, Bottle has a heavy Bottle cradle of Gold genus on the bottom of the Bottle so it is unlikely that the Bottle will collapse. Although it feels somewhat expensive, it is worthwhile, but the value for that part seems to be effective due to time and effort shortening, but it was in the Instruction Manual as soon as water was used, but I tried hard, but Tube is White It got cloudy.. It seems better to think that Tube is disposable.
View detail
What is good - - -
Brake hose Purchase this by watching Impre on replacement.
It certainly did it by sucking it many times with a syringe.
If Tank is CHALY (Lol)
be careful.
View detail
This is convenient
Although the list price was as high as 5000 yen, I was shy away
I bought it to try it
I did not expect that until I arrived
It's really solidly made and feel like it can be used for a long time
Once you exchange it, the work progresses considerably to Smooth
Easy to use, easy to exchange Fluid
I think that even the first person can understand usage immediately
I was worried, Hose did not come off
liked it
I should have bought it sooner
It will be much easier from the next
View detail
It is superior to CostValue because it can be used all the time.
Although it is possible to do the work without it, if you have this product, I purchased it because the operation time is shortened and the certainty increases. When purchasing this product at a price that asks for work once at Shop, it is superior to CostValue as it can be used for a long time. View detail
Time reduction!
It might be a good idea to grasp the Brake lever and exchange the Fluid, but if you want to shorten the time it would be better to use this product. Also I used it for Fluid exchange of Big scooter, but this product was very useful because it does not reach Rear. View detail
It is used for exchanging a Brake fluid and a Clutch fluid. although the Fluid receptacle of the Plastic bottle which was seen in the book until now [ ], and was made from its original work was used -- -- if it is this Changer, it is easy
It is used for exchanging a Brake fluid and a Clutch fluid.
although the Fluid receptacle of the Plastic bottle which was seen in the book until now [
], and was made from its original work was used --
-- if it is this Changer, it is easy to do work, and it is easy to extract a Fluid.
Since it is firm structure, an Air does not blend.
View detail
Although the thing whose price is slightly high is worrisome, it uses or is easy to become. I think that the effectiveness of air-bleeding increases certainly. It is recommended.
Although the thing whose price is slightly high is worrisome, it uses or is easy to become.
I think that the effectiveness of air-bleeding increases certainly.
It is recommended.
View detail
Although purchased to muffler exchange, they are necessaries for hooking a spring. It is safe and easier than doing on pliers or pliers. It was good to purchase.
Although purchased to muffler exchange, they are necessaries for hooking a spring.
It is safe and easier than doing on pliers or pliers.
It was good to purchase.
View detail
It purchased without the brake fluid. The pump (piston) was touch called an auxiliary role. Repetition (air-bleeding) operation of opening and closing of a brake lever and a breeder bulb can exchange early after all. I think whether it is good
It purchased without the brake fluid.
The pump (piston) was touch called an auxiliary role.
Repetition (air-bleeding) operation of opening and closing of a brake lever and a breeder bulb can exchange early after all.
I think whether it is good to extract with a pump the oil which remained in the after hose.
View detail