Reviews
TS125R.
This is the Hose of the 2-st Oil.
This is the transfer section from the oil pump to the carburetor.
When cleaning the carburetor, the existing hose was replaced because it had broken due to deterioration.
I.D. 2mm was not found in any homestore or supply store.
View detail
Easy and clean on the go!
I put it in the Accessory CaseSpace under the Seat and clean it at the Touring destination. I am happy to be able to clean the Helmet and Cowl in just the right size. I also use it in the summer, and I like that it does not dry out the Seat and is pleasant to use. View detail
no problem
There were no problems, and the product could be used normally. View detail
For maintenance of GlassCoating vehicles
I use it on my glass coated cb400sb and dio110. It is also used on cars, although it is listed as for motorcycles.
It is ideal for GlassCoating vehicles as it does not seem to contain Wax and is cosmetically excellent! It is also EXACTLY for shipping adjustments!
View detail
It's cheap and there's a lot of it, so don't be afraid to use it.
I bought this for a variety of versatile uses.
For the time being, I plan to use it to wipe down after car washes, spray up simple coating agents, clean Helmet, and if there is any left over, to clean the house.
I thought it was a Small one after reading various Reviews,
It was a bit larger than I expected, just enough to cover the top of the helmet. (I'm posting a picture.)
The texture is the same level as that of common micro fiber,
It is not of a particularly high quality, but I think the strength of the Largeest is that you can use the GunGun without hesitation, and it does not get scratched easily even if you wipe up the Cowl.
I would buy it again when it runs out.
View detail
Easy to use
Uses as expected and performs well View detail
Purchased at Wash for Vehicle:！！！！！
[How is it used?
I bought it in a wash-for-vehicle.
Was the one you received as per Image?
It is about the size of A3Size. I feel that the water absorbency has decreased as the frequency of use increases.
How was your experience with it?
I am satisfied with the product because it generally absorbs water.
View detail
I love it!
I tried them on and found that the size was Exactly the same as usual. The sole is thin, but I feel that it is a good thickness for motorcycles. The steel core in the toe gives a sense of security and at the same time makes it easier to change gears. I think it is a good product in terms of cost performance. I want another pair. View detail
GOOD for easy cleaning
I was looking for a WetCROSS without Wax effect since both my two Motorcycles and Helmet have commercial Spray type GlassCoating. This product is excellent in that respect.
The material is thick and easy to use. By the way, it was sold at a certain home center for 360 yen. You can have as many as you want, so I think it's perfect for adjusting shipping costs.
View detail
Cheap and easy to use
You can use anything from Oil to Gasoline.
I purchased this for my Oil4Liter cans.
It has a wide range of applications!
I have no complaints at this price, but if I had to say, I would have liked it to be 5 cm longer.
View detail
Necessities when changing Oil
This is the first time I have used this product, and it is a convenient product that fits tightly into the mouth of Honda's UltraG1 and can be disposed of as is.
However, if the engine is a Vertical TypeEngine and refueling is done from above, the nozzle part is a little short, and there were times when the oil would spill unless the kick pedal was removed on my vehicle.
I would be more than happy to have a longer Nozzle as a separate Spec.
View detail
Cheap Oil nozzle
If oil is poured directly into a motorcycle, there is a risk of spilling it, so it is safe to add a nozzle.
I bought this product because it was recommended to me. There is nothing special about it, but I think it is a product that can be recommended to everyone because it is inexpensive and has no problems in use.
View detail
Handy to have.
MicroCROSS is just convenient for wiping down helmets and the exterior of motorcycles.
I use the Barriers coat by WAKOS, and it is just right for wiping up beautifully without worrying about scratches, especially when using such Coating type Chemicals.
View detail
Easy to use
I was using a similar one, but replaced it with this one when I ran out of Hose for air venting.
I use it on a 4L can and it pours Smoothly and is easy to use.
View detail
It is an eye opener!
I own an Indian Pursuit and have had many occasions when I wanted to stand my motorcycle upright for maintenance and customization.
It is convenient and I wish I had purchased it earlier.
View detail
Cheap and easy to use
[How is it used?
I bought it because it was cheap on OutletSale.
It is used for car washing and maintenance.
How was your experience with it?
Although it is a disposable CROSS, it is also reasonably durable, so it can be used for a surprisingly long time.
It is nice because it can be used in the form of a Tissue box.
How did it compare to other products?
It is much easier to use than Dustcloth or the durable CROSS, and it is much less expensive.
[Points to note]
Nothing in particular, but if it gets dirty to some extent, throw it away.
View detail
Fits: HONDA DAXetc., Others , HONDA MONKEY
Cospa best
I was able to lift my heavy BMW K1200RS without any problem. It is very stable and the cost performance is great.
It is quite heavy, but I think that contributes to its stabilization.
View detail
Unbelievable!
The Rear wheel of my ZX-14R has turned completely Black due to excessive use of rubs.
I used this and it wiped off easily.
I'll take a picture of the front and the back in case you're interested, but it goes from completely black to this clean.
There is no front or back to the product.
I forgot to take a picture of the pitch-black, but the recovery looks almost like new.
However, the oil that fell after cleaning with the Stainless SteelSYNC in the sink stuck to the SYNC.
I put it away. A good place to wash it is outdoors or something.
View detail
Fits: HONDA DAXetc., Others , HONDA MONKEY
ChainMaintenance is now easier.
In the past, chain maintenance was done with the rear wheels on the roller stand, but the parking lot is slightly sloped and the rear wheels would gap from the standenter as they were being turned, making it very hard work.
This Lift made ChainMaintenance a breeze!
It is for use on a DragStar 250. When I received the product and saw it, I wondered if it would fit under the frame. But it went in without any difficulty.
The price is reasonable and the product itself is solid.
This was a good purchase.
View detail
Required for Oil replacement!
[How is it used?
I use this when I change the oil in my Scooter! I had to cut a dry plastic bottle to pour the oil, but it was a hassle, so I bought this product. I am glad that it became easy.
How was your experience with it?
Of course it is easy to use. It is a common Nozzle? I would appreciate it if you could put it with the Oil when you buy it. It gets sticky after one use, so I think if you wash it thoroughly and store it, you can use it again.
How did it compare to other products?
I felt there was not that much difference. I think they are the same.
Might as well buy them together when you exchange Oil!
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail