Reviews
Switching from Digital torque wrench
[How is it used?
I have been using KTC's Digital ratchet until now.
In use Alarm sounds when setting Torque is reached in Spec.
It is difficult to stop the tightening at the time of sounding but setting TorqueExactly to stop
If it's around 10N.m, it's not so much Over, but around 30N.m, it's up to the latter half of 31N.m.
The display goes and so on.
I'm not sure what's going on, so I'll stop at Mechanical's Cutting edge.
Buy MechanicalTorque wrench from Tonichi
Was the one you received as per Image?
as pictured
How was your experience with it?
The initial setup is a bit tedious.
I still feel more comfortable with Mechanical.
The easy-to-understand structure of the Torque, which can be locked with a click, is good.
There is just no visible N.m. indication, but it may be due to the degree of tightening.
I don't know, maybe it's Overtorque.
It's invisible, so it's good!
[Points to note]
So much so that I always drop the scale to at least Torque when I'm done using it and store it.
Digital ratchet is easier and hassle-free in this area.
How did it compare to other products?
Digital ratchet is a method of specifying the target Torque as a number and stopping it when it sounds.
Simple and easy to use for everyone, but the Spec.
Tightening multiple parts is difficult to do quickly.
The preliminary alarm sounds, and from there the main alarm sounds and reaches the set torque, but it takes a long time to close from the preliminary alarm to the main alarm while watching the situation slowly.
On the other hand, with Tonichi's MechanicalTorque wrench, it's just a click and you're done.
I can tighten them one after another.
Of course, if you tighten it with a lot of force or over the zone of idling after cutting, it will over, but if you do it normally, it can be tightened precisely.
I don't often use both Digital and Mechanical, but I'll probably end up using only Mechanical.
View detail
To use Point
I recently used it in a Tire replacement.
I was A little inquisitive as to whether this was the right way to use it.
View detail
Buy for Maintenance
The scale is colored for easy understanding.
It is used infrequently, but it is used for Large.
View detail
Power management for old cars!
Purchased to manage power supply for old car!
I am impressed with the function-specific split, and I love the fact that I can visually determine the information I need!
View detail
Overall, KO!!!!
I am satisfied with the well made product, but I have old eyes and it is hard for me to see the memory.
Otherwise, it is OK.
View detail
Koso mini 3
The product matches the description, the product is not available in Vietnam so you have to wait for shipping from webike Japan at a quite high price. I tested it and it works perfectly. View detail
Not bad, but,
Not bad, but the lock part is sometimes subtle and difficult to use. View detail
Small Type
The DAYTONASmall Type Air Gauge is an easy-to-use product with good visibility. If I had not been concerned about the price, I would have chosen WITH HOSEKI. View detail
Torque management of Oil replacement
I used to have Dealer replace the oil, but I decided to purchase it to manage Torque so that I don't make mistakes when I turn it by hand.
The product has a solid weight and is easy to use.
I thought the Torque range could be used for Motorcycle maintenance.
Since I am a beginner, I thought it would be better to have a more detailed Instruction Manual on how to use the Torque wrench. I was wondering if you could give me more details on how to use the Torque wrench, such as how to adjust the Torque value after use, how to use it in a tight space, etc., since it says not to use a joint, etc.
I think the product itself is satisfactory for the price.
View detail
Peace of mind knowing the status of Battery
The battery for two-wheeled vehicles is smaller in capacity than that for four-wheeled vehicles,
Access to BatterySpace is so bad,
It is difficult to know Condition easily.
But with this product,
Highly accurate voltage information can be obtained via smartphone.
Use with Battery Charger,
Even Motorcycle without Kick starter,
We have been able to use the system without excessive worry about battery uptime.
The same product would be used on two Motorcycles,
If they are parked close to each other, there is a possibility of mixed signals.
If improved, it will be easier to use.
View detail
Not with this one, though.
Torque range is not wide enough to be configured (Low) And, Large tightening Torque setting is out of range. 。 It is useful only for low-tightening Torque, which is below the setting range for high-tightening Torque. 。 You should have it if you want to maintain it carefully. View detail
Low Torque
I had a Torque wrench over 20N, but the suspension etc.
For the low Torque indication part, I used to tighten it by hand Torque.
I purchased this for low Torque for safety reasons.
I thought about DigitalSpec. but the part that would be mechanical”Snap”.
I chose this product
The feeling is not bad and it is useful.
View detail
Inspection supplies that penetrate regardless of Material
[How is it used?
The power supply when installing a USB power supply, etc., and the earth search.
Was the one you received as per Image?
The package is simple and as shown in the Image.
It is unexpected that the tip of the terminal is quite sharp, perhaps to enable inspection by sticking it into the Plain Type Terminal.
Cap is included but was missing when I noticed it and may have been somewhat loose
How was your experience with it?
Although it was not possible to measure any voltage or current, it was possible to check various points with Earth clamped in appropriate places to see where the power source was coming from.
Since Cable is about 80cm, after checking Plus and Minus, we were able to try out the fixation points with pathways and Tie Wrap as it is.
Since it can be purchased for only one coin in terms of price, it is not so regrettable in case the Cable breaks or disconnects when it is bent at a steeper angle than expected by Handlebar, for example.
After installing all the electrical components, it is no longer used for measurement, but it is increasingly used as a tool for drilling holes because of its sharp tip and Gold price, which is not too high even if it is broken.
I've penetrated quite a few polyesters and skins, and the tips still remain sharp enough to be painful to the fingertips.
[Points to note]
The tip is sharp enough to easily pierce paper, thin plastic, cloth, and skin, so it is quite painful when it pierces the hand.
How did it compare to other products?
Compared to most products, the price is much lower due to the fact that the equipment does not measure.
Where can I get power and where can I connect it to use the electrical components? I recommend this product for people like me who think that all they need is to search for the answer. On the other hand, I want to see the values of electricity that I can't see. I want to work while watching. I do not recommend this product to such a person.
View detail
Graduation from Hand Torque
I wanted a Wrenchunch for low Torque and purchased it.
I used to do it by hand Torque, but now I can do it around Brake, etc.
It was good because I wanted to tighten the important parts with the designated Torque.
The more expensive ones may not have any errors, but from the hand Torque
I think the accuracy has improved a little.
View detail
Firmly impression.
Firmly, it looks heavier and sturdier than I imagined.
This type of compact air gauge sometimes interferes with Brake Discs and cannot be used, but this type plugs into 90-degrees, so it can be used somehow.
View detail
easy to hold
It is easy to hold.
I had one pc for Wheel for my car but bought this one for Torque management for my Motorcycle.
I usually tighten it with a hand Luc Wrench.
View detail
Compact and highly visible voltmeter
The Oil Temperature Meter made by DAYTONA was installed, but since there is an opening in the bracket, a voltmeter made by the same manufacturer was installed.
I saw it.
The Size is the same, so it fits together well and looks good.
It functions well as a voltmeter, with a red warning lamp to notify you when the voltage drops below 12?.
Since the voltage increase/decrease is displayed in real time, it may be possible to predict when to replace batteries.
View detail
Voltage is not measured.
Used to locate power source
LED in Body emits light when voltage is present
It can be checked with one hand, so it's useful in tight spaces.
View detail
first visit to Tonichi
I have a KTC digital ratchet, but the measurement range is down to 60nm.
I've been working on the suspension and drivetrain recently.
I bought it because I thought it would be good for me to stay at Handluk Wrench forever.
Somehow I felt that Mechanical, not Digital, would be better for the Large Torque, so I chose Mechanical.
Then there is the Manufacturer, since we use KTC or Tohnichi for our main tools.
I was initially looking for KTC as Main, but Torque wrench up to 140N.m side is not available.
Digital ratchet is the only way to go. I have a 200 N.m product, but I don't need that much.
Above all, the main Site. Sold Out Notation of
Maybe a model change? If a new one comes out soon after purchase...
You're going to be disappointed!
With such concerns, I decided to look for Tohnichi, which was recommended by a friend. I decided to look for Tohnichi, which was recommended to me by a friend.
I had never heard of this Manufacturer, so I looked around for reviews and reputation.
Looks very good, doesn't it?
Lineup also has products up to 140 N.m
However, there are two types of MODELs with the same measurement range:resin handles and Gold genus Knurl.
It's hard to decide which to choose.
Gold Knurl for sites that get sticky with oil or require durability
If you are just using it occasionally as a hobby and want it to look good, you should probably choose a resin handle.
Usability is
Torque settings are displayed in Lens for both the main and sub scales, making it easy to check the setting values and easy to use.
The resin grip is also easy to hold and work with.
The feeling of the click after reaching the Torque setting is also very pleasant, isn't it?
It is reassuring to know that the Knob that locks the set Torque is made by the genus Gold.
KTC is Material:I wonder if it will be damaged over time since it is plastic. I worry about it unnecessarily, don't I?
Also note that Case is sold separately.
Case is a precision tool, so it is necessary, but 5,000 yen is a bit expensive.
A little less expensive would be nice.
View detail
Convenient
I was looking for a simple type that I can put in my Cigarette because I don't always check the voltage.
It can be used while driving, but with Daytona's Cigarette power supply with lid, the lid that is left open shakes.
LED display is Blue. It is hard to see in daylight.
Body is smooth and sturdy.
I like that it doesn't look cheap.
View detail