Reviews
Good price and ease of use there.
[How is it used?
I was originally using a Torque wrench made by SIGNET with a different measuring range, but I wanted to manage the smallest bolt of the Torque better, so I bought this Torque wrench.
Was the one you received as per Image?
The picture showed the same as the SIGNET Torque wrench I usually use, but when I saw the product I received, it was much smaller than I imagined;
How was your experience with it?
Since it is the same as the Torque wrench made by SIGNET that we had been using, the Torque settings and other ease-of-use did not change.
However, it is a little troublesome that the Socket cannot be replaced as it is, since it is usually 3/8 size. (Lol)
Prices are relatively low, but accuracy (%) The cosmetics are also moderately cost-effective because they are comparable to other companies' products at ±3.
[Points to note]
If you normally use 3/8Size, you will need a Conversion Adapter or 1/4 Socket because the Socket size is different.
How did it compare to other products?
None
View detail
It's going to last a long time.
It is very solidly made and can be used for a long time. The Bolt and Nut are not easily damaged by the wide range of sizes and no rattle. View detail
To manage the Torque
I use it to manage the torque on the important parts of the bolt. The drivetrain is especially severe, so I tighten the torque to prevent accidents, including wheel nuts.
It's luxurious and easy to use.
View detail
I've always wanted one
I've been wanting one since I haven't had a MONKEY Wrench for a long time I don't know how to use it very well Of course it can be used as a normal wrench, but it is also useful for holding down parts and so on Yes
There were two types of LargeSmall from SIGNET, but this is the Small Smallest one It is I thought this one was probably more frequently used for Motorcycles Dial movement, no wobble in the chin part, and the quality feeling was excellent I would like to use it for a long time from now
View detail
The quality of maintenance is improved just by having 1 pc
I didn't have my own torque wrench until now, so I had to borrow or pre-marker I used to tighten the bolts by marking them with a "mark" and so on Tire and Brake detachment are now done so that you can manage the torque at any time I bought it to
Torque wrenches range from a variety of tool manufacturers to a variety of torque Wrench is out, but for now 10-100NM I thought that I could cover a certain amount of torque management if this product was available Tools Set was prepared with SIGNET, and Brand which seems to be comparatively reliable The fact that it was much cheaper than other companies was also a deciding factor
A checklist of tolerances made by the Manufacturer is included with the product, and the product description It is a torque value within dirt & plusmn; 3% If it is this high accuracy, the cost performance is good enough
The item unlocks Blue at the base of the Grip and makes the Grip any Torque Just turn it like that There is a window at the top of the lock that shows the torque value, so it's easy to set up
The lower limit is measured from 10NM, but to be honest, you can set a more detailed torque value up to 20NM The torque wrenches that can do this seem to be more reliable Especially for Engine, which is a place where detailed torque management is required, not so much for I do not recommend it When tightening Caliper bolts and Axle nuts, which require more torque than this, we recommend This one pc seems to work fine If it is used in combination with a more detailed torque wrench, depending on the use, good maintenance will also progress I think
However, it is not easy to fit in the toolbox, because the Grip part is thick I keep it in the exclusive Case separately But for those who do maintenance on the road, such as Circuit, it's not a problem You may find it difficult to carry around
View detail
Cost performance It is a preeminent tool.
Torque wrench is Pin gully, so I'm worried about which to buy.
I do not want to buy cheap clothes and regret it, (TOHNICHI) It is likely to choose a famous Manufacturer, but it is expensive.
SHIGNET was a reliable tool Manufacturer, so I chose this.
As a result, it was Large Correct!
We use two windows for the eyepatch.
First of all, Large unit (Every 5 to 10 N) The scale of the next small unit (0. Fits every 25 N). Therefore, you can set the scale without reading mistakes.
There is also Torque wrench which matches with only the graduation carved in the genus Gold, but it is hard to see due to the adjustment of light, and it seems to be wrong.
On that point, I think this product is easy to use and hard to make a mistake.
When the prescribed Torque is reached "Snap" You can check the sound and feel firmly. You can feel good quality and good use.
Since it is in Case of Plastic molded item, it can store without worry of breakage and loss. Translation (Please enter here for instructions manual also with chitin.
Although I have not confirmed the durability yet, I trust SHIGNET products there.
View detail
It is cheap, I wonder if I can measure Torque for the time being
I think that there is a more expensive and sophisticated Torque wrench, but since it can be measured to 1 pc up to 100 NM, I purchased it as it would be better to finish with 1 pc for normal maintenance.
Certainly 100NM is used only when exchanging Axle Shaft or Tire, so I think it would be better to introduce one pc separately and introduce something that can measure the Torque value normally used for servicing, but amateur use Considering the frequency, is not this sufficient.
I think that it is worrisome to mention that there is a backlash in the Dial of the Torque setting and the finish is cheap points, but I think that I was glad I bought it.
View detail
Maybe it's okay, is not it?
I was wondering where Torque wrench would be from before and what kind of Manufacturer I wanted to do, but I saw it as SIGNET for the time being. Although I used it immediately after arrival,
It is okay. After that, will you endure that it will not break, durability?
View detail