Reviews
It might be too large for me.
I always ignore Torque when I install Parts and I was worried about it.
But for a cheap price, Case is solid.
I thought that the time to use it would come sooner or later.
View detail
Easy-to-read voltmeter
The display screen is large and easy to read. I purchased this product because I thought that if there is an electrical failure, the first thing I would check is the battery. I think it is a good product because I can always check the strength of the battery and it is very clear at a glance. View detail
The handle is short!
[How is it used?
Maintenance of SEROW250fi
Was the one you received as per Image?
Yes
How was your experience with it?
Subject of comparison = Fujiwara Sangyo (EValue?) 3/8, Pre-set type, 20 to 110Nm
?The number of GEAR is 45T, so it is very good to be able to cachica fine!
?The pattern is short and Lever's principle is weak and Large strange.SEROW Tire on and off (85Nm) I did it by standing up and putting my weight on it. The Fujiwara Sangyo was able to do it by squatting and using only the strength of my arms???. I think it needs to be 5 cm longer than the Fujiwara Sangyo's so that the workability can keep up with the measuring ability.
? If you have a small torque of about 50Nm or less, coupled with the GEAR number, it's easy to use.
This is just an impression in my case, because there are individual differences in arm strength etc.
[Points to note]
? Above, where the handle is short. If you have a strong arm, it may be Large strong.
Memory is not in increments of 10, but in increments of 14. You'll get used to it.
How did it compare to other products?
As mentioned above, the number of GEARs is good, but the disadvantage is that the handle is short and difficult to apply force.
I've only used this and Fujiwara Sangyo, so I can't compare it to others.
View detail
Very easy to use once you get used to it
I had been using a low- and high-Torque pre-road formula, but the accuracy was nowhere near as good, so I got excited.
6.It can be used in a wide range of applications because of its wide specified Torque range of 8N-m to 135N-m.
It was difficult to understand how to use it at first, but I got used to it by looking at the Instruction Manual.
Digital type is still convenient because it informs me by Buzzer.
It is also used for Tire replacement on cars.
View detail
Good, but not great.
I'd like to get a Torque wrench, but I'm not sure if it's a cheap one from Home centeretc. …
I think it's good for people who
I think the range of Torque measurement is also just right for Motorcycle.
The only complaint I have is that it is difficult to understand the feeling of the power escaping when you reach the specified torque.
It's not a problem once you get used to it, but it may be confusing at first!
View detail
Safe for Torque Management
I didn't use the torque wrench because I usually do light work such as changing oil or touching small bolt nuts. This time I got it for the Sub-frame installation. The Torque wrench is reasonably priced and the quality is very good. I can manage my Torque with confidence and I can do maintenance with peace of mind. View detail
It'll take some getting used to.
I was troubled between this product of Fujiwara Sangyo and STR3-60 of the pre-set type because the torque wrench which I am using now became old, but I decided to buy this product for the first time. I bought this product of Digital type for the first time.
It took a little time to get used to it at first because it is judged by the sound, the flashing of the LED, and the numerical value visually.
It's good to work in a position where you can see the LCD display, though, because at least you can see the values.
When I can't see the LCD display because I use it upside down, I have to rely on the sound.
Because the battery is consumed even if the power is turned off, it is troublesome to take out and install the battery, but it is said from the frequency of use, and is no problem?
The screw of the battery lid is not to come off from the lid, and the consideration not to lose it is good.
View detail
Speaking of Torque wrench, Tonichi
This is Torque wrench of Tonichi.
Speaking of Torque wrench, it is Tonichi.
You may be tempted to look at the famous general manufacturer products such as ktc, but the exclusive manufacturer products are different in usability.
The ktc Pre-set torqueWrench has a "Knick" feel, but the Tonichi is a "Pushin".
It's hard to tell from the text, but it's totally different when you compare them.
In the meantime, if you buy this 40-200 for LargeTorque, you won't have much trouble.
Also, if you have a 5-40 for SmallTorque, you'll never have a problem with motorcycle maintenance.
Stoicism is sure that both ends of Range have a precision of … so, with the above combination, it is somewhat uneasy around 40N?m used so-so, but …
However, if it is a Sun Machine Level that is not sent out to be calibrated at all after purchase, there is no doubt that maintenance can be carried out with a sense of security that cannot be compared with hand-locked management, so I think it is no problem.
If you're looking for a "good Torque wrench", this is definitely the way to go.
View detail
For MaintenanceTorque Management
[How is it used?
I bought this for Torque management when installing Plug and Point coveretc.
Was the one you received as per Image?
The texture was better than I thought it would be.
How was your experience with it?
I have the impression that it is necessary and sufficient for what I am using.
[Points to note]
I think the Click sound is a little too small, so it's important to use it carefully.
How did it compare to other products?
I don't have another one, so I can't compare, but if you're an amateur using it for simple maintenance, I think it's a good choice because it's affordable.
Other items that would be helpful
Opinions and requests for Items/Manufacturer that should be purchased together
Socket etc. are not included and need to be purchased separately.
View detail
It breaks a lot…
I've put it on a few times and it's an Image that breaks often. View detail
Much easier to use than I thought.
I used it to fasten the screw when I changed the Disc Plate (Rotor) of Rear. I've never had to worry about Torque before. "That's about right. I've been doing this for about 40 years, but recently I've started to worry a little, probably because I'm getting older.
This is the first time I've bought a Torque wrench, and although I was worried about the price difference between several products, this one was the right choice for me. I'm glad to say that the width of the setting Torque is wide and it feels quite solid and trustworthy.
This time, I did Plate fastening with 30Nm. This is because it was mentioned in the Plate Instruction Manual of brembo that I bought. When the specified Torque is reached, the Head bends with a crunch. It's a little bit of a bend, but you can definitely feel it because it's clearly there and you can feel it.
But is the Torque correct? I'm sure there's a question about that, but there's no way to find out... but from my own experience so far... "That's about it. I think it's so-so right. (Sorry for the lazy comment)
View detail
Power Generation Limit
AxisZ is a motorcycle that is said to have no room for power generation, but I was worried because I have a Grip heater, so I put it on as a good luck charm. It is not dazzling in the daytime or at night and is easy to see during the day. In addition, it is easy to see that the screen shines red and warns, and it is good, but the cord is short to measure directly with the baffle, and some processing is necessary to bring it around the Handlebar in the Cowl of the Scooter. The power of AxisZ is quite severe even in Idling, so it is better to turn on the Grip heater and stop Idling. View detail
Small, but useful.
I bought this because of the low price to check the voltage status of Battery.
The installation was able to be done without so much problem, but it was difficult in the installation place of the display part though the thing was small, because it was attached to various things at the time of touring, I tried to stick it to the HandlebarStem part after all.
It is difficult to see while riding due to the poor installation location, but the display is small, but the letters are large and easy to read.
Sometimes it's hard to see depending on the sunlight.
It's a good product, though I'm temporarily removing it now.
View detail
The functionality is good, but there are concerns about accuracy.
The current torque is displayed as a peak hold, which is very easy to understand, and the torque adjustment range is wide. (3-60N・m) It is very convenient.
I think it is very intuitive and well thought out without having to read the Instruction Manual.
The only thing that bothers me is that the Torque value sometimes doesn't change even though I'm tightening it, so I'm not sure about the accuracy.
I felt that I needed to tighten it consistently at a certain speed, not too slowly.
View detail
Safe to use
of the sameSeries MTQL40N (5 to 40 N・m) for this purpose.
I was using another company's Digital torque wrench before, but I was worried about the accuracy of the wrench because the torque value rarely moved even though I was tightening it, so I switched to Tonichi.
This is especially useful for the 5-40 where accuracy is needed, as there are many places where it is used on a Motorcycle.
The Torque adjustment is easy and the Click feeling is pleasant to use.
However, there is a point where there is no choice because the Torque wrench itself is compact, but the main scale is small, and the secondary scale is black on a chrome ground, and the character is too thin and it is a little difficult to see.
View detail
sufficient
I was looking for a portable size Air gauge.
It was exactly what I expected
I don't see any particular problems with it, although it's normal and there's nothing to write home about.
View detail
I use it on the Plug socket of my Small diameter Plug.
I bought this to manage the tightening torque of the Plug.
The Torque setting part is a little difficult, but once you set it up, the rest is easy.
It comes with a hard case to help you store your precision equipment.
I think this is the best Plug socket for Small diameter Plug.
View detail
Small, but the text is easy to read.
I bought it in a store, but I will Impression it.
Because there is a lot of power use for the battery capacity is small, I introduced it as Voltage Monitor.
For a Small Type, the characters are large and the visibility is outstanding.
Back light changes to Red color when it becomes less than 12V, but it is not understood at all in the daytime.
In other words, the brightness of the Back light is not enough and it is dark even in the daytime, and even if it changes to Red color, it is not noticed at all.
It doesn't make sense to use the Red color in Warning. I'd like to see a brighter Back light.
View detail
Battery Management
MonitorRing is very useful!
Even though the body is small, it is easy to see the letters.
View detail
Compact and easy to read
Refreshingly compact with limited functions and no trouble in installation location.
The length of the cable is just right, but the Rose wire is the MinusPoint.
View detail