Reviews
Fairly easy to use
I purchased this product to use when changing Tire.
It was just the right length, and I personally liked it just fine.
View detail
Large Scale
I purchased this for Torque management of Axle Shaft installation.
The wide range of the Torque measurement range could be used for Caliper Mounting Bolt.
The most Large is 210 Nm, so it is indeed Large-sized.
View detail
Yamaha Multimeter
Product well received, package was bubble wrapped delivery was fast. Highly recommended to buy. Tested Multimeter in good working order. View detail
Buy direct from Manufacturer
The company had a tone-in salesperson come to the company and promote the product. That's when I discovered the Digi-Torque and bought it.
This is placed between the Ratchet and Socket to measure the torque. When you reach the specified torque, you can hear a sound.
I use it for cars and motorcycles.
View detail
Is good
Torque management for maintenance provides added peace of mind.
Dial is easy to read, easy to set up, solid quality, and easy to use.
View detail
Easy to use
It is very convenient for taking out the power supply and checking the Earth.
It is easy to use and can be confirmed by both color and sound, making it easy to use even for first-time users.
It is useful and safe to use when installing electrical components.
View detail
Is good
The Chromium Plating process is highly accurate and resistant to Rust.
I use it to measure all kinds of Parts and have no institutional problems.
This Caliper is very easy to use due to its low rattling.
View detail
Convenient
You can check the battery status.
You can easily check it by simply inserting it into the Cigar lighter socket when Ignition is ON.
It is easy and not difficult.
View detail
Torque in Motorcycle Maintenance can almost cover
Low Torque for Drain and Plug uses sister product ETR3-25.
I bought this because I liked it.
I don't know if this is an individual product issue, but when I set the Torque and Snap, the neck bends and the Torque is set back to Zero.
When I rotate the Body lever, it is stuck and will not turn.
It is unfortunate that it has to be turned once in the tightening direction before it can be loosened.
This is not the case with ETR3-25.
The Torque range is larger than that of ETR3-25, so the letters are written in detail and are difficult to read for the old eyes.
View detail
For tightening of Drain and Plug
I have a SK11 Digital type, but I like the snap sound of Analog.
I was looking for a low Torque for tightening the Drain and Plug as per Title.
The main thing that attracted me was the colored text part, which made it easy to read.
View detail
Koso was meter red
This time I am going to fix in my car for checking voltage. After long time finally I found the correct size for my suitable place . The real time voltage as a multimeter show up and low voltage/high voltage warning also working perfectly (check it test bench) I'm recommending to who are like to work and update gadgets enthusiasts. View detail
Essential tool for tightening Torque management
[How is it used?
Torque control for tightening the Rear Axle Nut when adjusting the chain, etc., and for relatively large torques.
Was the one you received as per Image?
It was just as Image.
I had another KTC Torque wrench with a lower Torque value, so I made it a Large wrench as it is.
How was your experience with it?
Easy to use
The scale is also easy to readQuantity:It is easy to Set.
It is also easy to understand the Click feeling when the setting Torque is reached.
[Points to note]
Naturally, a larger Torque setting requires more force for tightening.
That said, if tightening is done with too much force all at once, it will result in overtorque, so care should be taken.
How did it compare to other products?
I have not compared it with other products.
Other items that would be helpful
12.Purchasing an Adapter from 7sq to 9.5sq is also a convenient way to increase the number of available Sockets.
View detail
Easy to use
The Inspection Tester is very useful for locating a permanent power source.
The LEDs light up for easy and safe use.
View detail
A must for low Torque measurements
I purchased this product to replace the stud bolt on my NSR250R Cylinder.
Low-Torque areas will be the source of Cracks if they become Overtorque even a little bit.
Torque management is essential.
So we used this one, and we are glad that we were able to use it successfully.
View detail
Easy to use
I used to tighten it properly when changing oil, but with this product, I can now manage the torque tightly. It is easy to use and there are no problems. View detail
Torque wrench at last!
[How is it used?
I have been tightening the brake disc, caliper, and other important parts by hand for a long time, but I finally purchased a new one.
Was the one you received as per Image?
Yes
How was your experience with it?
You will want to Torque wrench everywhere.
[Points to note]
When storing, store at a lower level than the low value estimate.
Spring, etc., so that Torque settings do not go haywire.
How did it compare to other products?
Compared to KTC and others, the same.
It costs a few thousand dollars and is rarely active, but it is fun to work with. It's safe and you can learn the Torque sensation.
View detail
It works just fine, but...
I bought this as a spare for miscellaneous use.
It is easy to use, and once Dial is aligned and fixed, it is measured.
Same as a normal pre-set Torque wrench.
I compared the measurements to Snapon to see if they were off by a large amount.
I think it is an acceptable score since it is almost the same.
It was good in the initial stages, but durability is unknown.
Isn't Speed fast losing accuracy? I have a suspicion that
In the end, I ended up using only Snapon.
If you are thinking that you just need to be able to measure for reference purposes, it would be okay to buy one.
View detail
Highly reliable
I bought it because it is necessary when tightening a motorcycle rear axle or other large torques.
The measurement range is also wide, so most things can be covered with this.
You can also set the measurement value by simply turning the Handlebar behind it.
The click feeling in that case is also easy to understand and the scale is easy to read.
Workability is high.
Since it is Tohnichi, the reliability of the measured values is high, and although it may need to be calibrated at some frequency, I believe it can be used for a long time.
One drawback is that the measured value is not available in the Quantity:I lock it with the knob behind the Handlebar when I set it.
Even if this is not tightened very hard when locked, it takes so much force that it hurts the hand when loosening it after measurement.
If only this point could be improved, I would have no complaints.
View detail
In addition to leather
I first bought it to poke holes in leather.
Now I use it to drill holes in everything.
I use it to put on Eyelet.
It is convenient because the hole will open as soon as you hit it with Hammer.
I think it is durable because the sharpness lasts for a long time.
View detail
Easy to use
The tip is sharp, and a light tap is all that is needed to firmly attach the mark.
If the Mark is shifted, the Drill hole will also be Large.
This product is very accurate and helpful.
Once you buy one, you won't be replacing it.
It is better to buy a good one from the beginning.
I can recommend this product.
View detail