Reviews
A sense of security to tighten with the stipulated Torque.
Used for the first time since purchase for Oil replacement &Clutch cover replacement today.
It is still very secure, unlike hand-look Wrench.
I had a hard time deciding between the Digital type and this one, but I bought this one because it was less expensive.
Pre-set type is a little difficult to understand how to read Memory, etc., but it is easy once you get used to it.
When it came to the regulation Torque, the unique Snap feel was easy to understand and use.
View detail
useful tool
A useful torque wrench is a must for self-maintenance of motorcycles. This KTC torque wrench purchased by webike has a torque range of 2-10 Nm and an accuracy of ±3%. It uses a highly visible scale to adjust the torque more comfortably. This type of wrench is specially used to tighten some small screws. When the small screws on the motorcycle are not tightened according to the specified torque, they are easy to slip and be damaged. -------------------------------------------------- -------- It is necessary to repair a good torque wrench for your own motorcycle. This KTC torque wrench purchased by Webike has 2-10 Nm of torque range and accuracy of ± 3%. The type wrench is specially used to tighten some small screws. The small screws on the motorcycle are not easily damaged when the torque is tightly fastened. Powered by Google Translator View detail
Essential tool for tightening Torque management
[How is it used?
Torque control for tightening the Rear Axle Nut when adjusting the chain, etc., and for relatively large torques.
Was the one you received as per Image?
It was just as Image.
I had another KTC Torque wrench with a lower Torque value, so I made it a Large wrench as it is.
How was your experience with it?
Easy to use
The scale is also easy to readQuantity:It is easy to Set.
It is also easy to understand the Click feeling when the setting Torque is reached.
[Points to note]
Naturally, a larger Torque setting requires more force for tightening.
That said, if tightening is done with too much force all at once, it will result in overtorque, so care should be taken.
How did it compare to other products?
I have not compared it with other products.
Other items that would be helpful
12.Purchasing an Adapter from 7sq to 9.5sq is also a convenient way to increase the number of available Sockets.
View detail
I wonder how many years I've been using it.
Ah. You're in the picture (laughs) Torque wrench.
How many years have you been using it (laughs)?
I didn't make any corrections or anything like that.
I think the accuracy is hardly crazy.
I use it infrequently (laughs).
When I put together the four-wheel Engine.
And I use another KTC Torque wrench.
Well, it is better to tighten the major parts with Torque wrench. It is safer.
View detail
Necessities
This is a change from the pre-set Digital ratchet.
I usually use it for replacement work up to M12-size bolt.
The most important feature of the Large is the sound that warns you when you approach the specified Torque.
With the pre-set system, I don't know how much more I need to tighten because I don't know what the current tightening force is, but with the Digital ratchet, it shows the progress so I can adjust the amount of force. With Digital ratchet, the progress is displayed, so you can adjust the amount of force you apply.
The torque is also displayed when loosening the bolt, so if you are removing a bolt with an unknown torque, you can use Digital ratchet to loosen it and find out the tightening torque. Of course, this is not the case if the bolt is sticking, but I tried it on another bolt and found it to be surprisingly accurate.
I send it out for calibration every year, and it is hardly crazy, and I think its durability is good.
Also, in the case of the pre-set formula, the gap between the largest and smallest acceptable values becomes large due to its structure, but in the case of digital ratchet, there is almost no error even at the smallest and largest values.
It is also repairable, so it is still in use even though it has been dropped into a waste oil receptacle in the four years I have been using it.
View detail
A feeling of raising the level of motorcycle tinkering
When I first started tinkering with motorcycles, I didn't understand the importance of torque management, but after experiencing many failures, I learned the importance of large. I feel that I have grown up to be able to use my gold to keep my motorcycle in good condition, rather than spending it on customization. I've used other manufacturers' torque wrenches, but the KTC is the best for me because the memory is easy to read, the controls are nice, and it looks cool. View detail
staple goods
I was thinking of choosing Tonichi or KTC, but KTC's delivery was faster, so I chose this one.
Of course, there was no particular quality problem.
View detail
The trust is different.
I've used several different pre-set formulas in the past.
After all, in SmallTorque, Quantity:It's hard to understand the response of the set Torque, and there are some things with durability problems and Timings that need to be calibrated.
I purchased this product because I felt that Digital, a reliable manufacturer, was the right choice for me, considering the possibility of parts damage.
Recently, I've been using the Torque wrench more often than ever, because accurate Torque management helps prevent breakage and trouble.
The feeling of use is conveyed step by step by light and sound, so it is easy to understand
You can work without worrying about it, so you can proceed with ease.
I think the good thing about Digital is that the notification function and the reading is reliable, and I am glad I chose Digital.
It is disappointing at the beginning of use because there is no pre-set shock that says "Yes, this far", but the fact that it informs you step by step with light and Buzzer makes a difference in the sense of security and trust.
I think that there is a thing that hangs are necessary in the case of a delicate Button push feeling and the display of the reading is a delicate tightening, and there is ingenuity to get used to or MemoReset, but Quantity of Pre-set:If it is the same thing even if it is Set, I do not feel a sense of defect too much.
The Grip is easy to grip, the Plating is thick, the Notch feeling with a sense of moderation, etc., durability can be expected, and it is quite useful, if this is the case, I was convinced that the price that I thought was expensive was also reasonable.
He is now a reliable person who is helping me with various tasks.
View detail
For Torque management!
Very useful for Torque management!
I also own an Analog Torque wrench, but I use it in different scenes.
I think they'd be very handy to have!
View detail
First Digital ratchet
I've been using a cheap Torque wrench from Home center.
I had the opportunity to remove the Bolt from the Clutch cover and Dynamo cover, so I purchased a good and accurate one at this time.
Compared to the Mechanical, it is easier to set up and you can see how much torque is being applied.
It is important to note that this unit has a Torque measurement range of 12 to 60 N・m.
Pre-setting can be done from 6N-m. Up to 12N-m is a reference value, but it is several times better than tightening with Torque, which is uneven, etc. by hand torque wrench, isn't it?
Of course, it would be most ideal if we could have both GEK030-C3A and GEK085-R3! (; ´∀))
I think this one is enough for DIY maintenance.
View detail
Failed about 1 year after purchase
The Wrench Torque Pre-Set Type was used, but the Quantity:Because the scale at the time of Set became difficult to see Small, I bought the commodity here which can be confirmed with the liquid crystal display.
I have been using it mainly for the management of the tightening torque of the drain bolt at the time of oil exchange, etc., and the place of a comparatively small torque.
-Good point.
The LCD display is very easy to read.
Even in places where the LCD display is not visible, you can set the target Torque to Quantity in advance.:If it is set, it can be confirmed by sound and light.
Target Torque also Quantity:5pcs. can be memorized and can be switched by simply pressing the Button, so it is convenient.
The Grip part is easy to grip and does not slip, so you can feel secure.
-Bad point.
The batteries drained quickly and I had to replace them four times in one year.
It is a little difficult to understand the Click feeling of Button.
The above is a feeling of use, but the failure that Button was crushed and did not come back occurred in about one year after purchase.
He said it would cost at least 6,000 yen or more to repair.
I would like to continue to use the Torque wrench, but if this failure were to occur once a year, the cost performance would be poor, so I decided to purchase a new pre-set type.
I think this is a great product for those who use it infrequently, but not for those who use it on a daily basis.
View detail
Expensive tools are expensive for a reason.
Do you think that you can use a cheap torque wrench from Home center? The father of the motorcycle shop I go to always tells me that the price of the cheap tools is the price of the inaccuracy, so if you really want to maintain your car properly, you should get the proper tools. You're right, it's not cheap. We own two types, 20-100 and 40-200. It's not cheap. But Torque management is life. View detail
It's obviously textured.
I bought it to manage the Torque in areas where a certain amount of high Torque is applied, such as removing and installing the Axle Shaft.
I was troubled with the torque wrench of SIGNET, but I chose KTC though it was a little high as the cost of security because it was a tool used for a long time and accuracy was a large thing.
When it arrives and it uses it, it is a normal Pre-set torqueWrench, but the texture of Handlebar itself is obviously high, and it is easy to use as a tool Single Body.
View detail
Torque management is difficult
My first digital ratchet
We used to use a pre-set torque wrench, but the actual torque I bought it because I thought it was convenient to see the numbers
My impression when using it is that it sounds to let me know when I'm near the designated Torque, but it's difficult to make the final adjustment (Soon, it goes overtorque.)
It is convenient to see the actual torque values as numbers, but in terms of ease of use and work, the pre-set type Wrench is easier to use
View detail
You might want to use it more often
I bought this for the tightening torque management of the engine of Motorcycle The torque range is wide and useful It's a bit disappointing because it sounds when you reach the Torque level I have to look at the instruction manual every time I forget how to use it because I use it only occasionally No batteries or no batteries for use If you don't usually use it, remove the batteries For personal use, you might want to prepare two types of pre-sets View detail
You can't cover the entire torque range with a single piece
These are essential items for DIY motorcycle tinkering
We used to use a cheap HomeCenter product, but we introduced this one for workability and accuracy
It's easy to use, with sound and RedLamp to let you know you're getting close to the setting
The only thing is, when it comes to automotive and motorcycle maintenance work, you can get the entire torque area in 1 pc It's a shame you can't cover it
Four-wheeled wheel nuts and Motorcycle's AxleBolt are around 100Nm Or, to match this, the area around 10Nm is outside the range
Quantity in different ranges:That's a pretty good Gold amount to buy 2pc
View detail
Torque management kitchen!
KTCDigital ratchet is the third Repeat purchase with this.
In addition to Digital display, it will let you know Torque set with light and sound, so it is very easy to use!
The feeling of use is the feeling that Parts firmly assembles up, it is very reliable.
Recently, KTCDigital ratchet is very useful to be attached to the restore of the old Motorcycle and clamp down the various Bolt etc by Torque.
Personally, SmallTorque has GEK 030 - C 3 A 9. 5 sq 2 - 30 N ? m for LargeTorque, GEK 135 - R 4 12. 7 sq 27 - 135 N ? m are used separately, furthermore the insertion angle 9. 5 sq to 6. To 3 sq, 12. 7 sq to 9. Adapter to convert to 5 sq is also used.
However, when converting the insertion angle, the measured Torque will be of Small Size size, so care must be taken in handling.
This time we purchased KTCDigital ratchet GEK 085-R3 9. I think that 5sq will be a standard category of 17 ~ 85 N ? m as measured range of Torque.
If you are considering purchasing from now on, please refer to the respective service manual of Motorcycle and select the appropriate measurement Torque product.
View detail
You can mark it beautifully.
We have tested on Aluminum and Stainless Steel material from weak to strong, but you can mark it beautifully without problem. I think the strength of the tip is sufficient. View detail
Digital display, sound announcement.
I bought it for fastening BridgeBolt kind after Front brake caliperOH. Because it is a security part, proper Torque management is an essential item. With Digital display, Torque can be set and saved, it is an excellent thing that notifies you with sound.
If it is a little cheaper! The best tool!
View detail
It tells us with LED and sound.
It is a very easy-to-use tool as it tells us with the sound and flashing LED when approaching the setting Torque.
Torque wrench of famous Manufacturer, Large is satisfied if it is this price at Digital.
View detail