Reviews
Step up from SteelScrew!
[How is it used?
Screw was replaced with external Fender, so Screw was changed from Steel to Material:Replaced with Stainless Steel.
Was the one you received as per Image?
Quality is as good as the Image.
Was the installation difficult?
Installation is easy as the SteelScrew is simply replaced.
How was your experience with it?
Fender is often exposed to moisture, so the replacement was made in consideration of durability, but it can be used without worrying about rust, so it is a sense of security.
[Included Parts:were they on?
No other than Screw.
[Was there anything that disappointed you?
The NORMAL Screw is slightly rounded, but this is a dish Screw, so the shape is slightly different.
▼I'm afraid of biting, but I think it is better than Steel rusting.
View detail
Bolt replacement in prominent areas allows you to use it without worrying about Rust!
[How is it used?
I purchased this to replace the Fender mounted Bolt on the Front fork.
Was the one you received as per Image?
It was shiny and high quality, just like the Image.
Was the installation difficult?
It can be easily installed by simply replacing the Bolt with a NORMAL Bolt.
How was your experience with it?
It can be used without worrying about Rust.
It is also shiny, though not as shiny as Plating, and good for the price.
[Included Parts:were they on?
No other than Bolt.
[Was there anything that disappointed you?
Not particularly
We do not recommend this because we are afraid of gnawing on the area where the heat is applied.
I appreciate the wide variety of lineups, such as ▼length and large size.
View detail
Easy to use
I used to use another company's aluminum screws, but they were so soft that the hex on the head of the screw would come off when tightened.
It is getting worse as it spreads more and more.
This product is hard and tight.
If the head size were a little larger, I would have used four of them, but they were Exactly in the part I use.
Cost performance is good.
View detail
Inch bolt essential for Harley parts installation
I bought this to install parts on my 2000 XL883XL1200C SPORTSTER 1200. harley bolt nuts are inch size and are not sold at Motorcycle supply stores or home centers. I bought this from Quantity:It is very nice to be able to purchase it in 1 pc. This time, the purpose was to attach the DockingHardware to the Seat rail, but the back side is designed to screw directly into the Sub-frame, so the Bolt that is not an Inch Pitch can not be used. View detail
The goal is to improve appearance
Bolt on Master CylinderClamp replaced with Titaniumium Bolt to improve appearance.
It may be slightly lighter, but you can't feel it.
Titanium's brilliance allows you to indulge in self-satisfaction.
View detail
Alternative to OEM Product!
When I took my NC750X out of Garage to wash it, I noticed that the Bolt on the Rear CarrierStay was missing.
It was not a place where you can easily remove it, and there were two places. I thought it might have been stolen, but I had to find a replacement. I was worried that it might be stolen, but I bought a replacement because it was not available.
View detail
It is easy to install.
It can be installed by anyone, but it is not strong and will break if not Torque managed.
Be careful not to over-tighten.
View detail
To stop Rust.
XSR900 has bolt holes for carriers? I didn't want the bolt holes to rust, so I put them on.
Gold in casual places is nice.
View detail
Cap bolt is also a Quantity:Set product.
[How is it used?
I purchased this product because I wanted to replace the bolt for fixing the exterior of the head, which had become licked as I repeatedly took it off and on.
Color and Cap bolt are Quantity:It is convenient to say it is convenient because it is a Set.
Was the one you received as per Image?
Standard for this type of aluminum spacer. FUJI TUBO type. The product was just as beautiful as the image on Webike's website, and it was exactly as shown in the image, without the uneven staining that is common in low-priced aluminum collars from other companies.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
One point can be used to attach a License Plate or to fix an accent to the exterior of the body, which is somewhat plain on the BoltSingle Body.
It is not lightweight, reinforced, etc. (strictly speaking, there is a slight increase in color), and it costs a lot of money, but I like this kind of product, and I am very grateful for it.
The appearance is that of the FUJI TSUBO Type Design from a generation ago, so in the age of 2025 Fashion!" I'm not a middle-aged person, but I'm not a trendy middle-aged person.
[Included Parts:were they on?
Normally, only the aluminum collar is sold for this type of product, but this product includes the cap bolt as well as the quantity.:It is a set, so the price is not cheap, but it is easy to use.
[Was there anything that disappointed you?
If you like the design as shown in Webike's image, you can buy it. Disappointing. It is lightweight enough.
Make good use of the wide selection of 11 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is at the top level, so I don't think that wrong usage is likely to occur (unless you get twisted and use it in a different way on purpose).
[Notes]
None in particular, in Color variations. The color tones are different from what I saw in the picture." There may be some things that are not so common in motorcycle accessory stores anymore, but that may not be a problem.
[ITEMS TO BUY TOGETHER
Cap bolt and color are Quantity:However, if you wish to use it for fixing numbers, etc., please purchase the required number of M6 size washers and nuts for the reverse side separately.
[Opinions and requests to Manufacturer
Please make the price a little lower so that I can easily purchase large quantities.
View detail
One point
I used it for One point around Handlebar. It is a completely self-sufficient part. View detail
Beautiful construction
Shape not available in Homsen, used for the exterior of Meter visor. View detail
It didn't have to be Chromoly, though.
Before, we used Stainless cap bolt and nut to fix the silencer of the Exhaust System, but they were chewed and stuck, and we had a hard time to remove them without cutting them with a grinder. I used Chromoly cap bolt and iron lock nut to fix the bolt.
I could have used a regular steel bolt, but I couldn't find a steel cap bolt at any of the home centers in my neighborhood.
View detail
For CaliperMount
The Bolt that came with Caliper support was
Replaced with a regular cap bolt because of the way it looks.
They wanted to look good with Titanium anyway.
Maybe it would have been better if it wasn't perforated.
View detail
![Flange Hexagon Bolt [Stainless Steel]](https://img.webike-cdn.net/catalogue/10800/shf06_TS.jpg)
No imprint on the head.
Thanks to its accuracy, it clings to the Snap.
Too bad there is no imprint on the head.
Grease was applied to the surface because it was used as a cover for the oil filter.
View detail
Used for Oil filter
It is unfortunate that there is no engraving on the head of the Bolt, but the difference from other Bolts is Fashion View detail
Good accuracy
Purchased as a replacement for an OEM Bolt that had broken.
Accuracy is not a problem, but it is a pity that the Head does not contain the ISA Logo.
View detail
AGUSTA
I bought it because of the way it looks. maziora blue would have been better. View detail
Things are good.
Great price, great quality!
I bought it on a trial basis and it was so good that I will buy other lengths as well.
View detail
pretty good bolts
For a friends bike they wanted some titanium tapered bolts to replace the stainless ones. Tese came out as being really good value so ordered. A little on the sharp side but overall, not too bad at all. They are happy with them and where they are, as long as the top looks good, it's all good View detail
For Dress-up
It is good to change the atmosphere by simply replacing Bolt.
Since it is aluminum, we used it in areas that are not under load.
It was unfortunate that there was an extra Bolt that was not long enough.
View detail