Reviews
300 yen per pc of BoltOver
[How is it used?
Used for Bolt for Screen fixation.
The Bolt that came with Screen was rusted out and had to be replaced.
By the way, Screen is this. ↓
https://www.webike.net/sd/23817914/
How was your experience with it?
Aluminum, so you have the peace of mind that it will never rust.
Since it is a conspicuous part, it will be considerably diminished if it rusts.
[Was there anything that disappointed you?
BoltQuantity:770 yen for 2pcs is still expensive.
View detail
Installed on Front Fender
Clean Anodized, quality is fine.
Even after long-term use, there is no deterioration due to UV rays.
I replaced it with a Front Fender Screw and it's nice and One point.
View detail
3.7
Background:I bought the Bolt because I needed it for my UniversalParts installation.
Quality/texture:at first it was fine, but after using it for a while it started to rust from the paint peeling off.
Performance/Function:If the Screw Mountain Pitch fits, you can use it with no problem.
Cost performance:the cost performance is not good considering the strength of the paint.
Overall rating:subtle.
View detail
It is Beauty without color unevenness.
I purchased JSM Aluminum Billet Footpeg board Hole cap for fixing.
The coloring of Anodized is good and the satisfaction level is high.
Since Color line nap also has 7 colors, body color etc. etc. I think that it is easy to match with.
I think it is expensive as it costs more than 300 yen per Bolt 1 pc, but I think that BoltCustom got a sense of coming out so it's not a waste.
Just replacing OEM's undiscovered Bolt with Bolt with anodized finish, it is recommended because you can turn on Accent.
View detail
Only two longs [Contents] To ...
Screen When I exchanged, I bought this set to exchange WellBolt, but at the bottom of the ZrX 1200 DAEG (front?) Discover two sets of here, where they are in trouble because they are short of Length. It became a well-formed Bolt successfully. View detail
I intend to take measures against theft w
I tried using Brake Caliper installation Bolt. Since ordinary simple Bolt is boring, I also tried to combat theft, but special tools are also sold normally, so it may not have much effect against anti-theft w View detail
To Imechen
We changed PlasticBolt to Bolt of this Anodized aluminum processing.
As one point color usage I think White.
I am worried about color discoloration, but since I usually store it as Garage, I am worried not too much.
If the price is a bit cheaper, I try various colors - -.
The seating surface of Bolt itself did not change as OEM and Large, and there was no problem with installation.
View detail
Rare Purple
I installed it in Chain guard of DJEBEL 250 XC.
I was looking for Purple to match colors with Rim etc, but there are quite a lot of Blue and Red..
Although it was expensive, I purchased it for Purple wanting it.
It is more like Red than Rim, but it is reassuring.
Strength is also hard to fade and performance is commensurate with price.
View detail
Strength, Finished Alone. Just high
250 yen or more with Bolt 1 pc - - - It is a high-priced item, but if you use cheap ColorBolt, I will recommend this.
Especially the strength does not compare with Chinese made or unnamed Manufacturer. It's not as good as SteelBolt, so you need to be careful with tightening and it is written down to Torque in the manual. If you do not tighten it to Brown it is Large I am using it without worrying it is durable.
There is a difference in density of Anodized depending on LOT. Although it is understandable when it is arranged, it may be better to purchase it collectively for those who are particular about it.
I installed it in WR's ZETASprocket guard. The color is slightly thinner than ZETABlue.
For reference, BoltLength is 40 mm.
View detail
High quality
It is a solid making. I tried it with Purple alumite of DJEBEL, but it seems that the color is slightly thin.
Although it may be likable and disliked because it protrudes quite a lot, Bolt's thickness may be useless if securing strength with Aluminum.
It is better to be less conspicuous in taste and little more in the taste.
It is quality that exceeds the line with cheap Aluminum Bolt.
View detail
Since it is absolutely necessary for Bolt 25 mm under the neck
Since we already changed the short Handlebar for Z250 at the time of delivery, we will have to add a little Arrangement when installing the Screen of MRA at a later time, so if you absolutely need a 25mm Bolt under your neck you can buy an ordinary I purchased 1 pc tens of yen Truss bolt and I got lost.
Since both Handlebar and Bar End were made into Gold of the bright eyes, this Bolt tried Titanium brown a little calmer even in the same line.
Privately, I am satisfied with Large, but since each person has its own sensitivity, please judge by Matching in the image.
This Cost is quite expensive for 4 Screws, but I think that it is A little luxury item that meets the odds of oddity owners like me who know only by those who understand.
View detail
Took about 2 weeks to receive my order. Although the size of the allen key that is used to remove the original screws is different, it is very easy to install. Took me less than 10 minutes to do so.
Took about 2 weeks to receive my order. Although the size of the allen key that is used to remove the original screws is different, it is very easy to install. Took me less than 10 minutes to do so. View detail
The Bolt of M6 which has stopped the Cover of the Muffler was exchanged.The Blue of the Bolt became an Accent, and more than it considered, it became a good Dress-up up.
The Bolt of M6 which has stopped the Cover of the Muffler was exchanged.The Blue of the
Bolt became an Accent, and more than it considered, it became a good Dress-up up.
View detail
Since Screens were exchanged, in passing, it purchased for the Dress-up up.since many things were looked for since the Size pure also at was M5x20, but there was nothing, the goods of M5x25 here were purchased, and the Magic saw currently sold a
Since Screens were exchanged, in passing, it purchased for the Dress-up up.since many things were looked for since the Size pure also at
was M5x20, but there was nothing, the goods of M5x25 here were purchased, and the Magic saw currently sold at the Home center also moved aside, and it came out of and cut it.
The pure Size could be processed easily and it has equipped in comfort than expected.
View detail
The Normal bolt of the SIDE Curl of CRM250AR was changed into the Aluminum Bolt. The color also became a Gold from the Silver, and though it was cheap, custom-made 感 rose.
The Normal bolt of the SIDE Curl of CRM250AR was changed into the Aluminum Bolt.
The
color also became a Gold from the Silver, and though it was cheap, custom-made 感 rose.
View detail
I was allowed to use F disk of a cygnus for the brembo and the object for support at the time of major-diameter-izing. Once, it is the use which considers a mischievous stop. Although it will separate simply if there is even a tool for exclusive u
I was allowed to use F disk of a cygnus for the brembo and the object for support at the time of major-diameter-izing.
Once, it is the use which considers a mischievous stop.
Although it will separate simply if there is even a tool for exclusive use ...
It is M10x25mm P1.25 in the M10x25mm P1.5 front-fork side at the brembo caliper side.
The bolting torque of ps. front caliper thinks whether the form of a machining part is a limit mostly that M10 size should stop tampering for 4.9 kg (normal numerical value).
Otherwise compared with the size of M8, it worries M10 that it is about 3 times the price of this.
I think whether the style is restored to Good!!!.
View detail
Completeness, such as a custom paint, increases. Since it is aluminum if it does not take care about torque, a head is weak. It is smooth, if it fastens after preparing the mountain by the side of a hole by a tap etc., when caught.
Completeness, such as a custom paint, increases.
Since it is aluminum if it does not take care about torque, a head is weak.
It is smooth, if it fastens after preparing the mountain by the side of a hole by a tap etc., when caught.
View detail
The thing of the DEYURA bolt which POJIPORINI of form is thinner and is liking which is exchange from POJIPORINI which was being used until now is made into BOTETSU a little. Please keep in mind that it differs from touch of an article image.
The thing of the DEYURA bolt which POJIPORINI of form is thinner and is liking which is exchange from POJIPORINI which was being used until now is made into BOTETSU a little.
Please keep in mind that it differs from touch of an article image.
View detail
Since only the yellow of the wing mark had floated in the motorcycle of black monochrome, the bolt of the cowl was also made into yellow. Yellow looks beautiful in a black cowl and it is very conspicuous. Since a high grade feeling comes out, it i
Since only the yellow of the wing mark had floated in the motorcycle of black monochrome, the bolt of the cowl was also made into yellow.
Yellow looks beautiful in a black cowl and it is very conspicuous.
Since a high grade feeling comes out, it is recommended.
View detail
Looking for the pure retractable exchange type, made in JP moto mart was purchased. Although there was also uneasiness somewhat since we vehicles were minor and there was no printing in the adaptation vehicle type of ? description of item .. It has eq
Looking for the pure retractable exchange type, made in JP moto mart was purchased.
Although there was also uneasiness somewhat since we vehicles were minor and there was no printing in the adaptation vehicle type of ? description of item .. It has equipped satisfactorily.
If a problem proposal is carried out by force ... if the knurl treatment process and the end cap are attached to an end -- more delightful kana -- I thought ...
however ... it is hard to slide thanks to the knurling, and operativity also improves, and I purchase it, and think that it was good.
View detail