Reviews
Racer 900 wash for Vehicle
I have a φ10-φ34 and bought it because it was too small for my Racer 900.
You can block it with Tape, but it is not expensive and is useful because it is not expensive and only needs to be inset.
View detail
It's neither good nor bad
I purchased this for use on my YZ125X.
It was installed without incident and I have no complaints.
View detail
Convenient for car wash.
To some extent, it can be used for any shape of Exhaust System. It is well made and safe. View detail
It was a perfect fit for the YOSHIMURAExhaust System.
I was worried about whether the Large size would fit before purchasing, but it was a perfect fit. I am satisfied. View detail
Would recommend, variable size is excellent.
Works just as advertised. Keeps water out of your pipe.Excellent plug to keep water out of the exhaust system. Many different sizes, can use it on both my 2-stroke and 4-stroke. Would recommend! The bright flag allows for me not to forget to remove it before my next ride! View detail
Used for JC92 Grom
It is a rainy day measure rather than a car wash.
I am a monogamist, so I wash my car with Car Wash sheet of for Vehicle.
I'm using it for commuting, so I'm not using Cover.
The Motorcycle garage is under the eaves, so when it rains and the wind is strong, rainwater is inside the Silencer, so when it rains, I put it on.
I used to stop my Vinyl bag with a hair band, but after searching around I found this and bought it.
The fit is good and almost no rainwater gets inside the Silencer.
However, durability is unknown. Depends on how you use it.
I am worried about hardening and cracking since it is quite soft, but this is something to be seen in the future. I am not sure if it will not come off even if the wind blows it backwards, but I have no experience with this, so I am assuming that it is probably large and sturdy. I have no experience with this, so I assume that Large is probably strong. I am concerned that it may be taken off under usage, but I will monitor its progress.
At that time, it is a re-purchase plusses for MotorcycleChain lock or something.
You should do it in advance, but if there is a cheap one, I will plan to buy it.
View detail
Easy to use
I bought it because I changed the Exhaust System to MORIWAKI and it was easy and affordable. View detail
Unobtrusive and convenient.
Cap for Exhaust System exit; given that there are many similar products, perhaps there is a company that manufactures them in bulk.
The simple is best.
However, I feel much safer when I wash my car without it.
If you are planning to run after washing the car, it is good, but if you are not planning to run after washing the car, water in the exhaust system will lead to rust from the inside without being noticed. This is a tool to prevent that.
View detail
Necessities for car wash
It is used for CRF250RX.
When using a high-pressure washer to wash rear fenders, rear tires, and the exhaust system itself, you can spray it without hesitation if you have this. It is easy to use because you don't have to use curing tape. It is not easy to remove. It is a must-have for car wash.
It cannot be used for motorcycles with small hole diameters such as SEROW.
View detail
DAYTONA daytona: -- pro grip silencer cap product number: -- 40847 description-of-item size: -- S size raw material: -- vinyl chloride color:, before [ for orange pipe internal diameter phi15~phi38 silencers ] carrying out a steam car wash, Unnecessar
DAYTONA daytona: -- pro grip silencer cap product number: -- 40847 description-of-item size: -- S size raw material: -- vinyl chloride color:, before [ for orange pipe internal diameter phi15~phi38 silencers ] carrying out a steam car wash,
Unnecessary flood will be shut out if Colet is inserted in a silencer end pipe!!
Items indispensable to an off vehicle owner.
View detail
Z900RS MORIWAKIShort Tube
The car wash was completed with no water and no worries - I'm glad I bought it. View detail
For car wash
Purchased to accompany car wash.
Items to be inserted into the Exhaust System outlet and used to wash the car.
It is neither possible nor impossible to use it in a normal way.
View detail
Firmly Guard
The moderate flexibility of the product allows it to bite firmly into the silencer and not come off easily even when subjected to the water flow of a high-pressure washer, so you can wash your car without worrying about water entering the car.
The color stands out, making it difficult to forget to remove or lose.
View detail
Cosy! Very convenient for car wash
[How I bought it]
I used to wash my car without plugging the Exhaust System because it was kind of a hassle when I washed my car lol.
But every time I finish washing the car, wipe it clean, and go home! When I turned on the engine, water that had accumulated in the exhaust system came out with the exhaust gas.
Impressions of use
I used it for the first time when I washed my car the other day and I put it on right after running it for the first time and it didn't melt, so I'm really happy about that lol. (I didn't think anything of it, I just put it on right away lol)
The size of the OEM exhaust system is large enough to fit almost any type of car.
If you are replacing the Exhaust System, you may not have enough Size for some things!
As long as it's plugged in tight, water will never get in, so you won't get your body wet with water from the Exhaust System like I did after washing my car! LOL.
It's definitely worth buying, as it did exactly what I expected it to do for about one Coin!
【Review】
Cheap and cosy!
It properly prevents water intrusion.
Complaints are not in the gain…
View detail
Easy to use
I use it when I wash my car, etc.
I've been using it for a long time and it's easy to use because Rubber doesn't harden either.
Before I bought it, I was worried that the weight would pull it off.
This is not the case, and the lid is securely in place.
View detail
A must-have at the car wash!
Prevents water from entering the Exhaust System when washing the car.
A bit of an Ideas product!
View detail
Tightly sealed
Since I didn't have a 4-stroke car wash, I had to use either a cured tape or Dustcloth when washing my YZ250FX, but the tape tends to peel off if you don't remove dirt before applying it, and Dustcloth doesn't seem to seal the car completely, so I bought this. I have used these plugs for 2-stroke DTs and knew they were convenient, but this is the first time I have used Pro grip plugs and they are very flexible and seal well. View detail
Used on KTM85
I bought this for my KTM85. It fits well and doesn't fall off if there is a little bump. View detail
It's stored outdoors in a 0Meter zone above sea level. ・・・・
[How is it used?
Manufacturer introduces it for the purpose of preventing flooding when washing the car, but
I bought this in case of pest infestation and flooding in the event of guerrilla rain.
Was the one you received as per Image?
YES. it looks soft and easy to use.
How was your experience with it?
The inner diameter of the silencer end of the KERKER made by Moto Liberty was 31.5mm.
The size I chose is S Size and it says 15-38mm inside diameter. I'm sure it varies from person to person, but the most large part of the end was 41mm.
[Points to note]
In comparison with the Silencer plug of the Taper shape that Unit releases. It's going to follow the internal geometry. I chose this one because I thought it would be a good choice, but it doesn't feel like it will deform inside or Seal tightly because of the small thickness of the rip part's biro biro.
How did it compare to other products?
If I continue to use it and feel a little? I'm thinking that if I feel that it's a little bit too much, I'll try the Taper shape one from Unit mentioned above.
View detail
Prevention of water intrusion into the exhaust system when washing the car
I bought this to prevent water from entering the exhaust system when I wash my car.
zx25r AXIS Lapo Japanese Government Approved Exhaust System.
Because the exhaust port was oval, it was anxious whether this product of the round form was Exactly hammed, but because the Plug part was Rubber, it pushed it in while turning, and inserted it, and actually washed the car, but water penetration could not be confirmed. It is effective.
I don't know what will happen if Level is sprayed directly with a high pressure washer, but I don't think I'll do that, so I don't think it's a practical problem.
The handle seems to be weak as a point of concern. At the time of actual pulling out, I pulled out holding the thick side of the Plug which protrudes from Exhaust System. when there is no protruding part with Large threshold Exhaust System, it becomes pulling out and inserting holding the handle, I think that it is a little uneasy.
View detail