Reviews
Purchased OilDrain tank4L Satisfied
I was looking for the smallest type of OilDrain tank. 4L is the smallest and cheapest, so I bought it immediately. 4L is just right for my GROM which has 900 liters of oil, so it will be useful for oil and fluid replacement.
The only disappointment is that when the Cap is opened, the Oil drain bolt just about fits through the hole.
But after careful consideration, I cut out the cap of the plastic bottle and inserted it with a hole in the middle so that it would not drop in.
I'm satisfied
View detail
Easy to dispose of Oil.
[How is it used?
To dispose of Oil after replacement in a waste oil can.
Was the one you received as per Image?
Yes.
How was your experience with it?
I haven't used it yet, but unlike the cheap oil pans I've been using from Asphalt Products, I've been able to use the same oil pan.
I like that the spout is attached around the middle.
This will allow pouring without spilling even if it is filled to the brim.
[Points to note]
None
How did it compare to other products?
It has a handle and I thought it was well thought out for the situation in which it would be used.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
It is quite convenient to have it.
I used to use a waste oil poi to change Oil at home.
I may be poor, but after using the waste oil poi, I also reused it with Vinyl and cotton, leaving only the corrugated Ball.
However, the waste oil poi was too high and the mouth of the Vinyl was not fixed properly with the mouth open, so I often spilled Oil once every few times.
Of course, waste oil poi is used to dispose of waste oil, but this eliminates the possibility of spilling oil unless it is very serious.
Also, if I drop the Drain Washer or something, I can find it quickly, so that alone is pretty good.
As you can probably tell from the shape of this product, it is characterized by the fact that the discharged Oil can be discharged like a funnel.
This feature is the value of this product, and if you don't need this feature, other products will suffice.
View detail
Very useful for Scooter!
[How is it used?
I bought this for my CYGNUS X SR Model 5 Oilfor Replacement, and the CYGNUS has an exquisite Center Stand in the way.
I bought this product because there is a drain bolt and the Center Stand is too low to fit a large-geometry oil pan.
Was the one you received as per Image?
It's a great product, but I'm not sure if it's the right size for me.
I thought it would be no problem if I could cover the cost. The size is just right for implementation and is easy to use.
How was your experience with it?
It is simple and easy to use. I also use it to change the oil in the circuit of my YZF-R25, which has been converted to a racer.
The only problem is that the sink is still flat, so there is a high possibility of spilling on the Large when you throw it away.
So I'm thinking of either cutting it or intentionally hitting the exhaust pipe to melt it and make it easier to flow.
[Points to note]
As others have mentioned, be careful when you pass the Center Stand through the neck, if it doesn't go in at an angle!
It's fine when you put it in, but after you pull the oil out, you have to angle it to get it out! Then it's a large disaster (laughs).
If the amount you pull out is small, you can go without spilling, but if it's a lot, you will definitely spill.
How did it compare to other products?
I think the square oil pan has a merit that it can be stacked.
If you are using a scooter, the Center Stand will be in the way.
That makes me wonder if it's any other shape than this one!
View detail
Very useful for all my vehicles
When researching the vast variety of oil drain pans available on line at Webike I decided on the style with a spout for easy of pouring the old oil into container for disposal and one with the capacity to not only handle the oil quanity from my motorcycle but also my car. I have used this product serveral times now and can say it is a pleaseure to use and an easy clean up with no mess at the end of the vehicle servicing. The product material is very strong and durable with no signs of weakness. The handles and the spout cap were features I did not consider I needed but make life a lot easier when caring a full pan of oil around the garage. Great designed and manufactured oil drain pan from ProTools. View detail
Quality Oil Drain Pan By PROTOOLS
My original oil drain pan to work on my motorcycle and car was just an old container cut in half to fit into the tight location but would always make a mess when emptying. With this well designed and manufactured oil drain pan I no longer have any issues my old oil into a bottle for recycling. I should have bought one of these years ago as it saves my time and keeps my garage clean during oil changes now. View detail
You can also use it to change oil and wash parts
I bought this for Oilfor Replacement I wanted to get a Nozzle type for this type
In the product photo, there is no Cap at the end of the Nozzle, but the product I received has a Cap, and it is also available for storage Oil does not drip
Nozzle's Cap was a nice miscalculation
It's not inconvenient to use, but it's the same with a wider and less heightened oil receiver It would have been better if there was a product that could hold about the same amount of space It would definitely be easier to use that way
View detail
The position of Drain bolt is effective for special Motorcycle!
I bought it for Oilfor Replacement of YAMAHA SR 400.
Oil of SR is Dry scattering type, so when removing Oil, Main is pulled out from Oil drain of Front Frame, but Oil remaining in Oil pan needs to be pulled out as well.
However, when setting up the Center Stand and accessing the Oil drain bolt, the installation is sideways, and because of the positional relationship with Center Stand, I felt it was difficult to use it with a general circular object.
So I purchased this PROTOOLS Compact Oil Drain Pan!
It was introduced as Scooter and Small Type for Vehicle, but the capacity is 2. With 68 L, Oil Capacity 2 of SR 400. It was decided that it was enough for 1 L.
Size is also Exactly, it fits in the gap of Center Stand, and it seems to be active in the future Oil replacement work.
Actual size is outside, height 40 cm, side 23 cm, height 7. 5cm. The inside is a deep place where Oil gathers, there are 14 cm in length, 20 cm in width, and 6 cm in depth.
The narrow part that catches the Oil of the tip part is the widest part on the outside is 17 cm and the narrow part is 15 cm.
Besides that, in the inside of a place with grooves vertically, it has a slope of 16 cm in length, 20 cm in width and 13 cm in width..
The feeling put on the floor has a sense of stability and it is very reliable!
Well, it is said that Large doubles as Small, but again "Appropriate material right place, proper use" It is necessary.
Since this time PROTOOLS Compact Oil Drain Pan is newly added, it seems to be able to enjoy Oil replacement work efficiently.
In the photograph, the PROTOOLS Sticker is stuck, but I tried to peel off what was attached to the packed bag.
View detail
Can be Compact
I bought it to Oilfor Replacement of SUPER CUB 90. It is good in shape that is easy to use in shape with Compact as Large tincture. It is even better if the price is a bit cheaper. View detail
It is a bargain in [ Drain pan / of a DAYTONA / same ] COSPAR!
It is a bargain in [ Drain pan / of a DAYTONA / same ] COSPAR! View detail
Although processing of waste oil was put into the pale can and taken out to the contractor, it thought it difficult to put into a pale can using a funnel. Since there is no fear of spilling since waste oil can be poured out from the mouth at a
Although processing of waste oil was put into the pale can and taken out to the contractor, it thought it difficult to put into a pale can using a funnel.
Since there is no fear of spilling since waste oil can be poured out from the mouth at a tip if it is this bread, he can feel easy.
It is pleasing that the
handle is also in a good position.
View detail
good [ to make the kana lid which should just narrow the crevice between it and the saucer on which the Oil which carries out warmth of the Engine and came to be alike of the Engine smoothly bounds ]
good [ to make the kana
lid which should just narrow the crevice between it and the
saucer on which the Oil which carries out warmth of the Engine and came to be alike of the Engine smoothly bounds ]
View detail
He wanted the small suspended tray used at a Garage, and it purchased about three. as Oil Drip pan -- the capacity 2L -- since it is a few, does a just right work load receive the Engine oil of small displacement volume vehicles, such as an abou
He wanted the small suspended tray used at a Garage, and it purchased about three.
as
Oil Drip pan -- the capacity 2L -- since it is a few, does a just right work load receive the Engine oil of small displacement volume vehicles, such as an about [ 0.5L~1L ] Fork oil, a Gear oil, and Cub, at most?
Since
BMW K1200RS has a Drain of a Transmission per Pivot of a Center stand.
Although the catchphrase which can let between the Center stands of a Scooter pass was expected and he bought it with eye aim -- It was a disappointment for a while in the state where an Oil will fall if the portion which the end extracted twists by an Exactly at the gap of a Center stand and it will twist when [ at which it puts and puts ] = Removing.
In fact, the direction of uses other than an Oil Drip pan is user-friendly.
As for the portion which the end extracted, a crevice is made between the floors which are raised bottoms and were placed, and since it is good for holding by hand exactly, it is used conveniently to carry out every [ of the tool in use / temporary ] by the floor of a Garage, or once receive dirt parts.
The imitation is put on the market also from the
DAYTONA, and on a nominal-cost Base, since it is practically equal, I think whether stock, a Sale discount rate, etc. are seen and the more suitable one should just be chosen.
View detail
[Webike monitor] The box type oil pan (5L) was conventionally used for the receptacle of an oil change. However, when it was an oil pan of 5L, was a large-sized motorcycle, and it moved and threw [ having entered with ordinary considerably, and ] away
[Webike monitor] The box type oil pan (5L) was conventionally used for the receptacle of an oil change.
However, when it was an oil pan of 5L, was a large-sized motorcycle, and it moved and threw [ having entered with ordinary considerably, and ] away into a milk carton, and it did not do quite carefully, it might spill.
Then, by the motorcycle shop which is going in and out, it saw using this product and opted for purchase.
Since there is capacity of 7L, and the shoot of oil sticks and there is also a canopy top, there is no fear of spilling.
Rather than former, it became very easy to throw away oil and it also shortened time substantially.
By the way, this oil pan height is about 13 cm.
Since old 5L oil pan was 8 cm in height, when removing a drain bolt, a margin decreases for a while rather than a former oil pan.
Probably, it will be easier to use a center stand or a stand on hand in the case of a motorcycle with a low ground clearance.
From the first, in my case, since the stand was used, although there was no trouble in particular, before purchasing this oil pan, it considers that it is better to see the higher vehicle of its own motorcycle.
View detail
Although the pack which can be thrown away as it is till then was used, he spilt in many cases and bought the trial. Since a jack is not used usually, it will spill inevitably only by space grip in case of a pack. Since it spilt and exchanged when
Although the pack which can be thrown away as it is till then was used, he spilt in many cases and bought the trial.
Since a jack is not used usually, it will spill inevitably only by space grip in case of a pack.
Since it spilt and exchanged when it was this, to me, I think that this one is suitable.
It is not necessary to inhale the accumulated oil enough with the milk carton into which the newspaper was torn and put, and it does not need to buy an oil pack.
Origin can be taken if it is used several times!
View detail
Although DIY maintenance was carried out, it had received in waste oil POIMODOKI which thrust the newspaper into waste oil POI or corrugated cardboard until now at the time of exchange of 2st mission oil directly. Since it is not so user-friendly, som
Although DIY maintenance was carried out, it had received in waste oil POIMODOKI which thrust the newspaper into waste oil POI or corrugated cardboard until now at the time of exchange of 2st mission oil directly.
Since it is not so user-friendly, sometimes falling or the lid of a box becoming obstructive, this product is purchased for in play here to reference.
Since the state of oil is also seen and it understands whether the oil amount is decreasing sharply in 4st when it receives in the suspended tray carried out perfectly too, I think that it is good.
The handle is attached and next processing is also Quan Tan.
View detail
A nozzle and a handle stick and it is very easy-to-use. Although the box type thing was used before, it was also hard for there to be no place which it has, or to fall, when moving waste oil, or to wipe off the remainder. Since a side does not bec
A nozzle and a handle stick and it is very easy-to-use.
Although the box type thing was used before, it was also hard for there to be no place which it has, or to fall, when moving waste oil, or to wipe off the remainder.
Since a side does not become dirty easily, since after use is wiped entirely and can be kept, it is easy Ching.
View detail