Reviews
Tightly sealed. Very easy to use and durable, if you are not sure which Oil Jug to choose, this is the one.
There are many Oil Jugs out there, but I bought this one because it has a lid and is just the right size.
There are three points to this product. The product does not need to be wiped clean every time, the liquid can be left in a sealed bottle, and spare parts are available.
The work is faster and less garbage is generated because there is no need to wipe up every time when the work is finished.
In particular, the ability to leave the liquid in place is quite an Advantage, and can be used, for example, in the following ways
1. Prevents Garbage contamination during work.
2. Oil replacement work can be done across the day.
3. Easy to reuse waste oil
4. Easy transfer of fluids
All items are related to personal DIY.
The first is obvious, but the second is more convenient and easier to set up for DIY. Even if it is already dark when the last injection is to be done, it can be carried over to the next day or even a few days later. This is especially useful for cases that take a long time to inject, such as Mission oil for cars.
3 is also important for me personally. For example, it is useful when maintenance around Overhaul or Clutch requires removing oil once, but you want to reuse it instead of using new oil.
The oil is a typical example of a motorcycle rider's sense of value that is easily bugged, but if you think about it calmly, it is very expensive, and I don't feel the need to replace it with new oil every time, especially when the clutch cover is opened.
4 was a useful Point that I realized after I bought it.
For example, for waste oil disposal, we used to make a waste oil pack, but now we receive the waste oil in an oil pan, return it to a jug, and then put it in a plastic bottle and take it to disposal. This kind of troublesome liquid transfer can be done cleanly.
Items is useful, but there are drawbacks.
First of all, the base of the nozzle sticks out in the bottle and leaves oil. This is not good.
Also, the Mesh at the base of the Nozzle is subtle. It reduces the injection speed.
The protrusion is not a functional part, so opening a horizontal hole may solve the problem.
A weak point in durability "Nozzle" I have been using it for about 4 years and it hasn't cracked.
This is a good product that I can highly recommend in JUG. Seriously recommended.
View detail
Easy-to-use 1L Oil Jug
I bought this oil for Scooter oilfor replacement, and in the case of Scooter, the replacement volume is less than 1L, so I bought one that is easier to use than the oil jug I have, as cheap as possible, and one that has a good reputation. View detail
I'm not sure what to do.
I was not sure whether to choose a 2-liter, but when I considered the washing process and storage after use, I was glad I chose the 1-liter version. I think the quality, feel, and cost performance are sufficient. View detail
Could have been 3L!
I used to use a 1L Oil Jug when I changed the oil, but it became a hassle to fill it several times with 1L, or worse, I forgot how many times to fill it, so I bought a 2L Oil Jug. After changing the oil, I put the Oil Jug in an appropriate Vinyl bag, but if I had a slightly larger Vinyl bag, I would have used a 3L bag. I thought 3L would have been fine. View detail
No frills, this is the most functional after all!
I chose and bought the cheapest, unadorned one without any particular preference.
The scale of contents is easy to read, and although it is simple in construction, it works fine and seems to be just right for me.
View detail
Convenient
I was wondering whether to buy it or not, but I still thought it would be useful to measure the amount of Oil. As mentioned in other reviews, it is good that the lid is attached so that garbage does not get in. It is also good that I can put in the oil without having to divide it into several portions. View detail
Lidded to prevent Garbage from getting in.
[How is it used?
Used to refuel a fuel tank from a carry can at Circuit.
Was the one you received as per Image?
Yes.
How was your experience with it?
The lid prevents Garbage from entering the container even if it is left outdoors.
The lid is important to keep Garbage out of the Fuel Line.
[Points to note]
None
How did it compare to other products?
I bought it because of its 5L capacity and large size, and because it is a reliable brand.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
It's a regular Oil Jug.
An ordinary Oil Jug, neither good nor bad.
It is a recommendation for people who don't care about anything as long as it is calibrated and doesn't leak or have holes in it.
View detail
KITACO Oil Jug1Liter
I wanted an Oil Jug with a lid, so I bought one.
Good because Garbage doesn't get in when storing.
View detail
Oil change essentials
I used it to replace Oil in CRF250L.
In order to properly measure the amount of Oil, we chose a small 1-liter bottle.
Memory is available for each 200 ml and is easy to understand.
It is unfortunate that the structure leaves a little Oil on the bellows nozzle, but it can't be helped.
While some attach Nozzles directly to the Bottle
I think an Oil Jug is a necessity in order to fill the prescribed amount.
View detail
It has a tip Cap for convenience.
It has a Cap on the tip Nozzle, which other companies do not have, reducing concerns about spills, etc.
It also has a scale, and I can add a scale in Magic if needed.
I am satisfied with the Large change in that it is a Simple product that is easy to use.
View detail
Very easy to use
I wasn't expecting much, but I bought it for Sale. The scale is easy to read and accurate, the nozzle diameter is appropriate, and it comes with a Cap, so overall I'm glad I went with this. 1L product was purchased, but it was the right choice as it is better to fill it with titbits. View detail
For water replacement of Radiator
It is just the right size to refill the Radiator and other water containers.
Large jugs are troublesome to wash and store, but this one is 1L, so it is small and easy to handle.
View detail
Easy to use Oil Jug
[How is it used?
I bought it to replace Oil at home.
Was the one you received as per Image?
As per Image.
How was your experience with it?
I like the tip Cap and Size and
I thought it was very nice to have a lid.
It's safe.
[Points to note]
Do not misread Memory
Do not make a weighing mistake.
How did it compare to other products?
No comparison.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
This is the only option.
[How is it used?
Used for Oilfor Replacement.
How was your experience with it?
It is insanely comfortable.
It is great that there is a lid on both of these when the Nozzle tip and Oil are inserted.
Without a lid, dust and other debris will inevitably get in.
This eliminates all the hassles of cleaning them with Parts cleaner each time, or keeping them in bags to prevent Garbage from getting into them.
It is wonderful that no impurities are mixed with Oil.
View detail
I like that it has a lid.
The lid is attached to the
Prevents contamination of Garbage, etc., before the next Oil change.
Since it is not possible to wash it every time, it is left as it is after use.
The next time you use it, put Oil into it.
The lid is helpful because you don't have to worry so much about Garbage contamination.
The container itself is thick and sturdy, so it can be used for a long time.
View detail
Convenient with a lid
I used to store my Oil Jug in a bag because Garbage would get in it when I stored it, but this one has a lid, so it's less work and more convenient.
It was easy to understand the amount because it came with a memory.
View detail
ได้รับของถูกต้องสินค้ามีคุณภาพ View detail
Improved workability for oil replacement
When I changed the oil, I used to put in the oil with a conventional roto, but the diameter didn't match and it leaked.
The Nozzle tip diameter of this product is Exactly the same as the Motorcycle side inlet, and I felt that it is indeed a Motorcycle product.
Also, the tip of Nozzle has a screw, and it can be sealed with the attached cap, so it doesn't stain the surroundings with the oil left in Nozzle when it is stored.
I wanted a scale in 100ml increments, so I went with 1L. The durability is yet to be seen, but if it lasts to some extent, I would like to Repeat.
View detail
Cheap and easy to use
The Oil volume of my Motorcycle is 3.3Liter.
With this Oil Jug, it is easy to measure 0.3 liters after pouring 1 liter 3 times.
For cleaning after use, spray a Large amount of Percuri and rinse and wash.
Leave it upside down and you're done.
View detail