Reviews
Chain and Manufacturer are the same
Not a Joint link formula, Chain while wearing Motorcycle, a new Chain is purchased because it is a Crimp formula.
Included Crimp - In Pin Cutter, when trying to take the old Chain, the attached Crimp - Since it seemed to bend or break the Pin Cutter, it is necessary to apply pressure after surely matching. Also, when Crimp a new Chain, I looked at the part of the old Chain's Crimp.
Initially it is hard to hold and difficult to match, but if you get used to it, I think that it is a good product with Compact.
View detail
Easy to use with Small Type.
When I saw the actual thing Small Saku, I felt that Large is durable with this.
I could actually use it with confidence.
After use, it is Large dirty to keep in mind.
View detail
Truly specialized Manufacturer
With Chain exchange, we rarely use opportunities but since it was Sale I tried purchasing Chain Cut & Crimp tool. Previously I exchanged using other items of the borrowed but pressed too much at the time of press fitting, and Crimp also pressed too much and the move of LINK was reluctant I bought again and redoed it.
For Chain Cut & Crimp tool only that failure is not structurally! It is thought well only for specialized Manufacturer. Whether there is nothing wrong if I read the Instruction Manual firmly. Just think about the Length and the position of the tool you need a little power. It is likely to have durability and it is safe because there are also some replacement parts.
View detail
Pin is ....
I think that it is easy to use, but also in other people's comments, Pin broke down for the second time. I think that the usage is not mistaken. It is salvation that for repair is out .... View detail
The price is high, but no doubt
In the Caulking Tool used before, there was a case that Pin was defeated by tightening and it was bent, but this product did not seem like that and it was completed without any problems. Although it is not cheap in price, we did not waste time and Gold in cheap buying, I realized that I purchased this product and was right answer. In advance I had confirmed the procedure of work at the video site, and I was able to work on Smooth.
Easy to put in force when tool holding is 27 mm and 19 mm double-end Wrench. 27 mm used MONKEY Wrench instead of Double-end Wrench, but Reach is so short that it is difficult to add power, so if Glasses were to be found it was still good workability ...
I am sorry for the company D of the manufacturer, but I used it for Crimp of Chain of Eganuma, but it worked perfectly.
View detail
I think it's good.
I bought it with Chain to exchange Chain.
I had a Chain Tool, but I did not have a caulking tool.
We also purchased Sale this time.
It took me a while to study the exchange video at YOU TUBE before I worked and studied.
At the time of press fitting, it is set to A, but when crimping it will fit B, so the place there is
I left paper of the manual, so I remembered it.
There was no failure, because I was able to finish work on Smooth Very good tool
I think.
It will be Compact, so it will be appreciated as it can be properly placed in the tool box.
It is convinced to hear that it was originally developed for Enduro.
You can exchange it with confidence from the next time.
View detail
Sturdy and Compact
One day I noticed the Chain of M1200 had changed to RedChain ??
If you look closely it was just rust floating. (Maintenance in spring and running only a few times on a sunny day, maybe because I ran along the coastline?)
Since Dido's ZVM-XSeries purchased about two years ago was left without being used
On this occasion I decided to experience Chain exchange first experience.
Front, Rear sprocket also waiting for 2 months at the same time exchange.
Exchange started as all the parts were collected the other day.
Instruction Manual does not see and on mobile YouTube D. I. While watching videos of DChain exchanges
work.
In the movie, although it was exchanging only Chain as it is with Sprocket, it is easy to understand, Kasaragarimon
I thought it was a tool that was easy to use and thought well.
It seems that you can purchase only the exhausted part as an option.
19,27 mm Double-end Wrench is also required.
View detail
I could use it without failing even my first time myself
I used it before watching a movie.
When using, A. I felt that B's location was a bit easier to understand, but I could do it without fail
View detail
Cospa Height
I purchased CrimpTool for about 3000 yen at the beginning, but I did not use it at all, I bought a Chain Cut & Crimp tool.
Body's strength, accuracy and so on are only high and are really good. Cut of Chain who struggled for that much, press fitting, Crimp got cheap.
When using the Chain Cut & Crimp tool, it is useful to have 27 and 19 Double-end Wrench.
View detail
There is only OEM Correspondence, it is user-friendly
Although it was my first time to replace Chain, Universal's Chain crimping tool was inconvenient and the core bent broke.
As expected there is only OEMChain correspondence, Kashi Maru is easy to use. After that the usage is very good as it is animated with Net.
But the price is a little bit better, but I'm looking for durability.
View detail
It's really good.
It is expensive but it is a well thought out tool so Cost performance is high. I will not lose buying it.
When putting Chain in guide, it will not be gapped, so it is easy to remove Pin and press fitting is not overkill due to the structure of press fitting plate.
Since Crimp degree can also be checked by removing Crimp pin, checking Crimp condition with Vernier calipers does not require troublesome things.
As YouTube uploaded the video of how to use from Manufacturer, I could use it without any worries.
Recommendation will be intense for people who will exchange Chain for the first time!
View detail
A little anxious.
At the time of Cut, the core was slightly shifted and it was damaged.
Because it depends on the situation of Crimp, in advance Thunder etc.. You can skip your head
Enable reliable Cut. However, because it broke easily, anxiety remains in Material.
View detail
To Repair Parts
Forcibly use damaged 420Chain ...
It was sold as being sold as Repair Parts. The Chain Cut & Crimp tool is a stain of Chain cut, caulking. If there is one, it will not break if used properly (Lol)
View detail
Sorry for the repair!
If I forcibly use it for 420's Chain, it will break ... (^ ^ ;;
I need Repair Parts. Let's use the tool properly ...
View detail
The one delivered at the beginning is a defective item
The thing that arrived at the beginning is bad processing of the Body part, it does not spin the Double-end Wrench, it is regrettable though the thing itself is good at buying MONKEY Wrench.
Also, the correspondence of Manufacturer personnel is bad and this is not good.
(Normally, if things of the house are taken once by calling and you can not leave, if you do not prompt from us, if you do not call us, the attitude of customers who can not be a Large hand company. If you call from here, the official answer that speaks only about the circumstances of your company will not be sent in writing)
I think that the person in charge happened to be bad by chance.
I do not think that the company as a whole looks like this, so I'd like to continue using it in the future.
I'm really sorry.
View detail
Easy to use and high rigidity.
【What made you decide the purchase?】
- Because it was a special tool provided by ChainManufacturer.
【How was it actually used?】
- I can not compare because I have never used other things,
There is no anxiety such as folding or bending of CutPin which is inexpensive and heard well,
Both quality and workability are very well considered products.
[Is there anything I was disappointed about?]
- It is slightly different from disappointment, but it feels slightly expensive.
【Hope for Manufacturer - Please let me know if you have any improvement points]
- In the above-mentioned point, I am happy that it is a price setting that will penetrate the Privater a little more.
【Have you compared items?】
- Inexpensive same function item
View detail
Easy detachment - Can be installed.
Sprocket I used it when changing Chain according to the exchange, Size also Small It explains the explanation of Net as well, so you can use easily and reliably once you understand the explanation properly, making it solid as well And Crimp is also reliable and secure. View detail
It is necessary as Spare of Kashimaru
Kashi Maru, who lends to people and comes back after being folded.
I can not break it even if I misuse it, but I also broke 1 pc at the beginning.
As I lent it to people this time, I came back after a splendid break, so I purchased it as Spare..
If you know how to use hang, it is not like a break.
View detail
Chain is a challenge to exchange.
I purchased it as a first Chain exchange. The deciding factor is that Chain company is issuing. Instruction Manual was slightly harder to understand because the character was a bit small, but it was about 40 minutes for the first time and it was possible to replace it. I can do it often, but when I exchange it for the second time When I remove Chain's Pin I have broken the Pin part of the Chain Cut & Crimp tool.
Since replacement parts are out from Manufacturer, it is a good place to be able to continue to use cheaply.
View detail
I used it for 520 ChainConversion
It is very simple to use and it can be confirmed also with the animation of the Instruction Manual and Site and it is very kind.
Regarding quality, it is rugged and it is unlikely that Sauce will be used no matter how many times it is used. Just plating and rust prevention treatment is not done and it is rust soon as it is left unclean.
Ease of use and quality are outstanding, but high price is a difficult point. Once you buy it, it will not be likely to replace it, but I think that it is becoming increasingly important for beginners to exchange themselves from now on.
If Chain is a bit cheaper as it is a part whose replacement frequency is not so much - - -
View detail