Reviews
Exclusive, after all!
[How is it used?
I bought this for the first time to replace the Chain myself.
Was the one you received as per Image?
A little smaller than Image? Feeling
How was your experience with it?
I was worried that the pin tip of the Chain Cut & Crimp tool might break when cutting the chain, but as long as I applied it straight to the pin at a right angle, the pin came off easily and I was able to cut the chain without any problems.
[Points to note]
When cutting a chain, set up the pin of the Chain Cut & Crimp tool so that it is straight and right-angled, and check the pin as you cut the chain. When press-fitting or crimping, remove the chain several times and check with a Caliperetc. to avoid mistakes.
How did it compare to other products?
There are inexpensive Crimp tools available, but I think you should not be stingy and buy a dedicated Chain Cut & Crimp tool, as you will get your money's worth after two Chain changes.
View detail
I broke it...
Speaking of ChainCutter for RK, it is such a robust Chain tool that it can be used for PRO.
...but therefore requires hang to use, and even the slightest wrong operation will destroy the Tool.
Specifically, if the tool is applied at an angle to the chain, it is out, which is a definite difference from DID's Chain Cut & Crimp tool, which can be somewhat deceptive.
This is what I was trying to do, but I failed spectacularly and bent the Pin at an angle.
The pin was slightly bent, but the bent pin did not feel good and was difficult to use.
I thought a light tap on it with the Hammer might fix it, and poof Drill!
As expected for PRO, it seemed to have been hardened so that it would not wear out even after repeated use, and it broke easily due to input from an unexpected direction.
It means that they are hard enough to provide the strongest performance when used correctly.
But don't worry.
PROSpec. so it can be purchased individually from Tool's Repair Parts1pc.
The Pin I received is the exact Pin as it was when it was new, no problems.
If used correctly, it is a very sturdy Pin, so if you can use it correctly, it is a Recommendation.
If you are not confident, you can practice with DID's Chain Cut & Crimp tool. Like this. It would be useful to use it after experiencing the
Well, if you fail like I did, it doesn't matter because you can still buy it in component units.
View detail
DID Chain Tool
I bought it on the recommendation of a motorcycle mechanic. It is incomparable in strength and quality to Chinese chain tools. Very good.
I did the chain cutting and riveting myself today and I am very satisfied. Since it is for personal use, it will probably last a lifetime. -------------------------------------------------- -------- I bought it as a recommendation from a motorcycle mechanic. The Chinese chain tool is comparable to rigidity or quality. Very good. I was chain cutting and riveting directly today. It's a personal purpose, so it's probably possible to use it for a lifetime. Powered by Google Translator
View detail
Glad I was able to purchase it.
I didn't expect to be able to purchase it. Purchased as a spare. View detail
Easy to use! Nice!
Easy to use! Better to use a longer wrench while using! The instruction is clear to understand! Remember to read the instruction carefully or watch the DID YouTube channel before changing the chain! View detail
First Chain Exchange
I was looking for a tool for my first Chain replacement.
There are well-known tools for Chain replacement, but they are expensive and infrequently used tools, so I was looking for something cheaper. I was looking for a cheaper tool and found this one.
I was worried because it was my first time, but I was able to replace it without any problems.
View detail
Note that it is Closed End.
I bought this one from a famous manufacturer because I couldn't find a position where the rattles were large enough with a cheap tool.
I wish there was something like a die-cut sponge.
The compactness of the tool without the handlebar section is also good since it is used infrequently.
However, a 27mm Wrench is needed as a replacement for the handlebar, and since it is not fixed, it comes off every time it is tilted, which is depressing, and the tightening side is 19mm.
The screw that holds the piece in place has a minus head, but it is not easy to work with, so I would like it to be hexagonal.
The other company's product has an open end, so it can be worked after the Sprocket, but this one has a closed end, so it must be worked under the Swing Arm, which makes it difficult to apply force, and depending on the shape of the Swing Arm, it may be even more difficult to work on.
This makes the rigidity of the Tool and the fixation and positioning of the Plate easier.
The product was considerably better than the cheap ones but could be improved in many ways.
View detail
First Chain exchange procured.
I procured this on my first Chain exchange.
Tools that cost as much as $10,000…
Huh? Do I really have to buy it? I thought so and checked other tools, but reluctantly prepared Kashimaru-kun-san because I was worried about its quality.
As a result, it was the right decision to buy Large.
The video is also available on youtube with the manual of the work, so please study it carefully before you start the work.
It took us about an hour to finish the Chain exchange.
The tool has a guide to avoid mistakes, and as long as the Chain is aligned with the guide, you can proceed without fail.
I bought Spare's Joint and never used it.
View detail
My First Chae Exchange
It was my first time to exchange a chain, but DID provide a video on YouTube showing how to use it, so I was able to do the work without making any mistakes. View detail
I can do it with one of these.
[How is it used?
I used it to replace Chain
Was the one you received as per Image?
Image
How was your experience with it?
Easy to replace
[Points to note]
Cannot be used without 27mmGlasses
Items to be purchased together are 27mm Glasses
View detail
DRC Chain tool PRO
When replacing a seal chain, if you can pull out the pin at the crimp part of the chain and crush the head of the pin at the joint part to make it tight, there is nothing to be afraid of! Based on my experience of replacing a chain when I was riding a 250, I chose DRC's product in search of a tool that could be used safely for replacing a chain on a large motorcycle.
The pin can be stored in the handlebar when stowed, and the large size of each part is appropriate and easy to use. The price is not that expensive, so I also appreciate the ease of access to the product.
I think Chain replacement should be a time-consuming and careful process, so it is also suitable for those who want to take their time.
We will examine the durability of the product in the future with the expectation that it will last for a long time.
View detail
Easier to use than I expected.
First Chain Exchange
It was RK's Chain and it was fine.
There is a video on YouTube from DID on how to use it.
Use it exactly like that and you're good to go!
View detail
It's also heavy.
I have not used it yet, but I think the thing is very well made. I was worried about buying an inexpensive tool, but I was right in buying this product. It looks like I can use it for a long time. The storage case is stylish too! View detail
Chain tool
Crimp and Cut are also easy to do.
The Plate that is pressed down when press fitting is a little gapped and the Plating has peeled off a little, but the function is excellent.
View detail
Used for first Chain exchange
I used this tool for my first Chain replacement with no difficulty. [Color] Clear is ready! View detail
I did it, so I bought it.
I used Kashimaru-kun to Cut&Crimp the 520Chain I purchased because it was a bit long.
…… made a mistake in using it when Crimping and broke the Pin.
So when you Cut, you do it on the Pin side, and when you Crimp, you flip the Crimp pin over lol.
After I folded it, I learned about it when I was told about it.
To be honest, it looked like it was going to break when I cut it, so I shaved the tip of the Pin with Belt Thunder before cutting it.
Incidentally, this Crimp&Pin Cutter is made of extremely hard Gold.
It cracks without bending.
It has already cracked really crisply and cleanly.
Well, I thought it would be a good idea to buy it, but I laughed at the very good price.
Even though it is a special Parts, such a small Parts is 2,000 yen for 1 pc.
I really wanted to use Large next time.
View detail
Purchased in conjunction with Chain replacement
[How is it used?
Purchased in conjunction with Chain and Sprocket exchange
Was the one you received as per Image?
Yes
How was your experience with it?
Easy to use
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Dedicated tool is love
I saw a case of failure because there was no dedicated tool for did, and there is an existing tool, but I purchased it additionally. It was the best choice, and I have no regrets. Strongly recommend. View detail
Even better if it's cheap.
It's pretty easy to use, and it's solid, so unless you're really bad at it, there's no chance of damage or other mistakes.
If you watch the video on the product page, you will have even more problems.
I just wish it was a little cheaper.
View detail
Thank goodness for Repair Parts!
It's been a while since I used it, but I crimped with the stick when I crimped.
It snapped off beautifully. (Lol)
Well, you're gonna break it;
I was looking at the Instruction Manual …
I didn't need to see it to know how to use it. LOL
It's strictly forbidden to work while looking at the instruction manual at random.
It was really helpful to have Repair Parts.
Thank you, Mr. Daido.
This time, though, Chain is Enuma. (Lol)
View detail