Reviews
You look good.
[How is it used?
XR230 Used for Valve Matching
Was the one you received as per Image?
Image
How was your experience with it?
We have completed the Valve matching process without any problems.
[Points to note]
It is a small package, but there is so much in it that you can't use it all.
No problem!
View detail
Spring in one shot.
I purchased this product for use in Silencer replacement.
Before I bought this product, I had to struggle with pliers and my fingers to finally install it, but I was able to install it in one shot.
It is a part that I am tempted to be stingy with because I don't use it often, but I think there is no harm in buying it because it makes things much easier.
View detail
Challenge to Valve Matching
I bought this to Challenge for my first Valve Matching. I think it is good to try everything, but I personally thought that this area should be left to PRO. Also, I think it is not a good way to do it, but the Suction Cup is easy to come off from Valve. I think it is a good cosmetic product because it comes with two types of Compound. View detail
Used to replace Glass Wool in Silencer
I used it to replace Glass Wool on HUSQVARNA's TE250, which I always use for forest road touring.
To be honest, it was discovered after purchase that the Silencer was rosed with Bolt, and it became unnecessary. However, I tried to hit the Riveter with Drill in one test, destroyed it, and hit a new Rivet with this tool, and it was easy to work with.
The reason I chose this product was the price, which was very inexpensive.
Silencer is a tool that is used only occasionally by those who disassemble the product, so I think this level of tool is sufficient.
View detail
Shoo, Pushing, Shoo, Snap
Used for new Valve replacement work on CUB.
I had to replace my previous tacho bar because the Rubber had been ruined.
The feel of the product is the same as the previous one.
The tacho did not come off and could be worked normally.
It's not a task I do very often, but I appreciate being able to purchase it because I can't move forward without it.
It also comes with Compound, which is helpful.
I hope that the Red Lead used for marking will also be available in the size of the Compound included with this product.
View detail
No spare Suction Cup
As pointed out in other reviews, LargeSmallQuantity on the Right Side of the photo:There is no spare Suction Cup for 5pcs. each. Suction Cup at both ends with stick (LargeSmall1 each) and Medium Eyes, and Quantity of Fine Compound:Set. I have no problem with this because I was convinced to buy it.
I used it to match the new Valve on my VIRAGO250, the Large one is for the Intake Valve and the Small one is for the Exhaust Valve.:Set was really helpful.
Well, this kind ofQuantity:I think those who buy Set do not need a lot of spare parts.
View detail
Required for Exhaust System installation
It's a good tool to have. View detail
I use it for Spring Remove in Exhaust System.
I use this product for Spring Remove on my Exhaust System and find it easier and more convenient to remove than radio pliers. View detail
Easy to use
The grips are easy to hold, so they are strong and easy to work with.
I use it to install and remove the Exhaust Spring and it prevents me from accidentally scratching the exhaust pipe.
View detail
If you don't want to damage your Exhaust System, buy it!
When replacing the Tandem Footpeg, I was told that the Exhaust System needed to be removed, but in the end I was able to replace it without removing it.
The spring is quite hard, so without a special tool, it looks like I might damage the exhaust system when I pull it with pliers, but with this, it was easy to remove.
I would rather keep it in my toolbox than scratch it and receive a Shock, but I think it will come in handy down the road.
View detail
I used it for Spring Tensile on Center Stand!
I purchased this to pull and install the OptionOEMCenter Stand Spring on my vehicle.
It is one of the products that it is convenient when there is it though the appearance is few.
View detail
on the basis of
The price was also very reasonable.
I think it's not too bad to use.
View detail
Convenient to have.
It is convenient to have it when removing and installing the Springetc. of Silencer of Chamber. View detail
It is useful for spring removal of exhaust systems.
The Grip is easy to grip and is designed for ease of use, which makes the installation and removal of the exhaust spring much easier and less likely to cause damage to the exhaust pipe. View detail
It's just a good product for beginners
I used it for MONKEY's Valve rubbing As others have written, it needs some work to be used In my case, I used it with Oil I still worked with it coming off many times
I think this is just fine because it's not something I use very often It is
View detail
It takes a lot of effort, but the quality is good
I bought this for the Rivet hammering of the Muffler silencer When hitting the thicker one, it is natural, but quite power is needed It hurts, but it's going to be beautiful, so it's okay View detail
It's useful enough
It was used for the SUPER SHERPA mortise
The Valve and Suction Cup were about the same size, so it was just fine
It looks like there are four Suction Cups in the picture, but in fact there are only two, so if you want to note That's probably all
Compound also had more than enough for the Valve 4
View detail
Assist with Double-sided Tape
It is Z50JjNORMAL of MONKEY.
Although I purchased it for Overhaul, it was still impossible for the Small Valve on the exhaust side.
So I tried to stick with Double-sided Tape. I used 100 thick thick type, but it is quite easy to use and can slide.
As a way of using it may be a wickedness, but as a result it is OK.
Anyway, I use it only occasionally, so I think that it is enough, including the amount of Compound.
View detail
Because I felt annoying with the radiopen
I bought it because I needed several scenes so far.
Radio pliers will do something, but this one is definitely easier to do.
It is Small compared with other Spring hooks, so I chose KIJIMA's thing.
I also do not take the place of the tool box, so I'd recommend it.
View detail
It is convenient to have!
It seems like a lie that I worked hard at Radio pliers.
I had skipped Spring and hurt my surroundings, but as expected it is a special tool, it's fun. Because it is cheap, it is convenient to have it!
View detail