Reviews
It can also be used for car washing.
One thing that always accompanies an off-road motorcycle is, after all, washing the car. It would be nice if we could use the car wash machine at Course to wash the car immediately after riding, but that is not always possible.
It would be nice if you could wash the car right away, but if you leave the car for a while, the mud will harden and make the car wash even more Large strange. Therefore, it is recommended to wash the car at the timing when the mud is still dry after driving, so that the mud can be easily removed.
It can also be used with the Moto Spade in one hand while scraping mud out of the car wash. The Brush part is especially easy to use when washing the car.
It is a well thought-out form and easy to use, as only the Brand "Motion pro" can do.
The only drawback is that it is a bit expensive.
I try to carry it with me by shoving it in my car's Off supplies box.
View detail
Special Tool is now a discontinued MODEL.
This tool is used for hammering in Stem bearing.
Exclusive Design makes it easy. (and beautifully) Bearing race can be installed.
If the Manufacturer tool is already discontinued, you can have it.
View detail
Necessary for disassembling and assembling Engine.
The price is a bit expensive, but it is necessary for disassembling and assembling off-road engines for competition use. The Blue Anodized is like Motion pro, and the Parenthesis is nice. View detail
Seal mounting is easier.
I am concerned about the durability of plastic, so I prefer DRC's Stainless Steel tool, but it has been out of stock for a long time. I would prefer to use DRC's Stainless Steel gloves, but they have been out of stock for a long time. It is inexpensive, so I can just give up and buy a new one if it breaks. View detail
As a primer to make car washing easier.
I used to put my off-road motorcycle on the transporter after a race and ride it home without cleaning the dirt off the body. However, by the time I arrived home, the dirt had hardened into a stubborn stain, making it difficult to wash the bike each time... (And mud falls in the Transporter...) If that's the case, why don't you just clean up the dirt there? So why don't we just clean the dirt off the car locally? I bought this to clean the dirt that gets into the back of the Fender, the footpeg, and the tight spots on the body at the site! I will use it in the future when I have a chance. View detail
works well and easy to use
Quick to adjust, excellent hold on the clutch to tighten nut. I would definitely recommend this product (tool) for anyone working on bike engines and proper maintenance on their bikes. Used on both my clutch, and my flywheel. This tool worked well and saved me alot of time when disassembly and rebuilding my motor. Built with quality and easy to use. This tool is a must for engine rebuilding View detail
Smaller than expected, but totally does the job. Very durable
This didn't fit perfectly as I had hoped, but I can't fault it much since it is a universal design. Some reviewers are complaining the tool is susceptible to damage - since it is aluminum and basically designed to jam the equivalent of a miniature wood chipper, you shouldn't expect it to withstand substantial torque. I bought two just in case and used them to do a valve job on my 2013 crf450r instead of the expensive factory Primary Gear Block tool without removing the clutch. I was able to jam the cam gears as well as the primary gear, though I was careful not to transfer too much force onto the cam chain by using secondary locking methods to spread the forces. I also used it as a secondary lock in conjunction with a large crescent wrench for removing the flywheel, eliminating the need for the pricey factory Flywheel Holder tool. NOTE: There is nothing in the Motion Pro line designed for automotive repairs. Though it may work on cars, this tool is intended for motorcycles. View detail
Perfect tool for the job!
I was a little skeptical about this tool working as promised, but I'm happy to say it got the job done pretty well. ther than the fact that you need both tools, it was worth it for me because I have multiple bikesDefinitely recommend to have for steering stem bearing removal and installation!! Makes a dreaded job so simple. Takes longer to set up tool than to get the bearing off. No cutting, no beating. Pulls bearing off with NO damage to stem or clampsWish they were not as expensive as they are since it's such a specific application but it really does work like a charm. View detail
Convenient
Fluid replacement time is totally different without it. I use Astro's One-Way Valve. Highly recommended! View detail
Easy to use
Small Spring hook, but I use it differently depending on the situation.
It is often used for relatively small springs for exhaust pipes and side stands.
Compact but can be pulled on and off firmly, so it is easy to put on and take off.
View detail
For Harley Clutch Adjustment
Bought this to adjust the clutch on my Twin cam.
It was easy to use, accurate, and did its job well.
Adjustment requires a separate 7/32 HexaWrench and 17mm Glasses for this tool.
View detail
Bearing can be driven vertically.
[How is it used?
I bought this to replace the Bearing on my Wheel.
Was the one you received as per Image?
You can find a lot of people who are interested in this type of product.
How was your experience with it?
I bought this to use when typing up my new Bearing.
I thought Hammer would be fine, but since this is my first time doing this, I thought I'd buy a solid tool.
It's a pretty good price. This.
I don't know how many times I'll use it in my lifetime, but it's easy to use and looks cool! w
You need to be prepared to buy it as it's cheaper than ruining your Wheel by making a typing mistake, but it's easy to use.
[Points to note]
It doesn't come with an instruction manual. I used it for Fee Ring, but I don't know if I need it or not.
But I was able to hit it solidly.
How did it compare to other products?
I think it's more reliable and easier than doing it with Hammer alone.
This is my first purchase so I was excited.
Other items that would be helpful
If you have Bearing Puller, this installer, and Snap ring pliers, there is nothing to be afraid of.
View detail
Small is easy to use.
The Spring hook is also small and easy to use because it is used for the relatively small spring of Exhaust pipe and Side Stand. View detail
How far can we torqued ..
It's quite simple to use, but
When you actually apply a torque of nearly 100 N-m
Naturally, this puts a strain on the chain
I don't know how far that can stand
Tension may be much larger than this, but
I don't feel comfortable unless the Manufacturer teaches you that, or someone else shows you an example the reason is that ...
Currently, Torque is there and Front sprocket's
The washer is bent to prevent it from becoming loose
View detail
MP Clutch Holding Tool
-Perfect fit for my clutch basket on R6 2007. -Easy to use. -MR tool is outwardly pleasant and convenient -Ideal to my clutch basket on the R6 2007. - easy to use. - The tool MP is externally pleasant and convenient (translated by Google Translator) View detail
It was a good way to get rid of Smaller Bearing
I used it to replace the Bearings on my ADDRESSV125
The large bearing of the diameter had been removed by Driver etc., but Because the inner diameter of the address is 10mm and small, it was not able to be removed by the driver I was able to remove it easily after using this product
Quantity:It was less expensive than the Bearing Puller sold in the Set
View detail
Feeling easy and good
Attach to FCR Carburetor Body equipped vehicle with CB 750F. Purchase because there is no outlet for synchronization. After purchasing a Vacuum gauge it is possible to tune at any time! I think that the person who will be serviced by himself is good. View detail