Reviews
It worked for the 3rd generation GSX1300R HAYABUSA.
I'm not sure if it's necessary to use a 14mm socket wrench or not, but I'm sure it's a good idea to use a small tool for the GSX1300R HAYABUSA in order to keep it in good condition. View detail
Fits: KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA MAGNA50, HONDA DREAM50, HONDA CUB Engine (FI Vehicles), HONDA CUB series Engine (Cell starter vehicle)
FIMONKEY, Flywheel removal
I think it was easy to use. It was safe to use. View detail
Fits: HONDA glom, HONDA Super Cub 50, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA MONKEY125
I cannot believe how easy this tool made the crankshaft installation
About quality and texture - The crankshaft assembly tool from Kitaco is made from a heavy duty steel and with an oxide coated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - I cannot believe how easy this tool made the crankshaft installation. Simple to use with basic hand tools and sustained no damage to the crankshaft or tool itself, so will able to be used again and again for the future engine builds that I have lined up. Products to buy together - A key product to purchase that will allow for removal of the crankshaft at home is a crankcase splitter tool, it is designed to pull the crankcases apart and can also be used to push the crankshaft out of the crankcase. Difficulty of installation - The installation of the crankshaft assembly tool is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the crankshaft assembly tool between the crankshaft and crankcase. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for but this is not the case the crankshaft assembly tool as it is more on par but specific for the Honda Grom and not a universal tool, which is great. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the crankshaft assembly tool, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
KITACO KITACO Spring hook
This is a must-have product for spring installation and replacement. I have personally purchased and used KITACO products for a long time, so I purchased this product this time. View detail
Required for 4EUEngine Overhaul
[How is it used?
I purchased this product to use for Engine overhaul of TZr50R.
The 4EUEngine Flywheel of TZr50R uses a special screw diameter and requires a special tool for this type of vehicle.
Was the one you received as per Image?
The product was exactly as shown in the Image and comes with the Instruction Manual, so it is ready to use as soon as it arrives.
How was your experience with it?
The quintessential product is a dedicated product and is quite easy to use.
Conversely, this is the only use for this Engine, so in a sense it is too much to handle.
To use the Fly Wheel Puller, attach the Fly Wheel Puller to the screw thread on the Crankshaft on the Flywheel side as shown in the video.
While holding it in place with the MONKEY, turn it. If it becomes very hard in the middle, you can easily loosen it by tapping it lightly with a rubber hammeretc. to give it a vibration. In my case, I pushed it through by force.
[Points to note]
Nothing special, but try not to damage Mt. Screw.
How did it compare to other products?
The competing product is the YAMAHAOEM SST, but the price is not much different, and this one is more economical since it comes with a point.
View detail
Very useful
This is a very convenient product to have when replacing Brake fluid. I think it is worth the price. View detail
You look good.
[How is it used?
XR230 Used for Valve Matching
Was the one you received as per Image?
Image
How was your experience with it?
We have completed the Valve matching process without any problems.
[Points to note]
It is a small package, but there is so much in it that you can't use it all.
No problem!
View detail
Low price but sufficient Quality
The price of Motion pro was too high, so I went with this one. The price is a quarter of the price, but the quality is solid and this product should be sufficient. The box is just a bonus, and the lid closure is so roughly made that it won't close after a few uses. View detail
Pump without ActiveAir
It is an indispensable item when replacing brake fluid and brake hose! At first glance, it looks like just a manual pump, but if you know the principle of air removal, this is enough without buying an effective pump! If it breaks, I will repeat again! View detail
Fits: YAMAHA TZR50, HONDA BENLY50CD90, HONDA XL80, HONDA XR100, HONDA XL50, HONDA NSR50, HONDA NSR80, HONDA NS50F, HONDA NS-1, HONDA CRM80, HONDA MBX50, HONDA CRM50, HONDA CR80R/RII, YAMAHA TZM50R
Convenient to have
I bought this tool to remove the clutch lock nut on my NSR50. It is not impossible to remove the clutch lock nut without this tool, but it is safer to use this tool because the lock nut is tightened by a considerable torque. The feel of using this tool is not as accurate as the DrumstickDrumstick, so it is difficult to apply force if you do not support the tool when using it. If you have an Impact wrench, you may not have to worry about this kind of feeling. View detail
Spring in one shot.
I purchased this product for use in Silencer replacement.
Before I bought this product, I had to struggle with pliers and my fingers to finally install it, but I was able to install it in one shot.
It is a part that I am tempted to be stingy with because I don't use it often, but I think there is no harm in buying it because it makes things much easier.
View detail
Brake fluid replacement
Used for brake fluid replacement. Although it is a little expensive View detail
Thank goodness for special tools
I used to work with an iron saw, but I bought a special tool. The solid handle makes it easy to work with, and prevents the outer surface from getting scratched. View detail
Good tool if used as intended.
outer fork tube clamp has a threaded lever on the side of the clamp that closes its jaws tightly on the fork. You can even remove the threaded lever from the outer fork tube clamp, so that the fork tube clamp can be placed in the vise anywhere along its length, not just by the fork dropout. Using the outer fork tube clamp is as easy as sliding it on the fork stanchion tube, tightening the threaded lever and holding the fork vertically while loosening the fork cap or base valve. Additionally, you can lay the fork on your workbench with the long arm of the tool stopping the fork from spinning by bracing it against the bench with the tool’s long arm. The DRC/Enzo outer fork tube clamp makes that possible, easier, cheaper and safer.Good price fast delivery worked perfect.Highly recommend View detail
Great tool if you have many bikes
I have dirtbikes and all the forks are different sizes. Finally bought this tool and now I can have one tool for many applications. I have used it twice and worked great. Stores in a small box and cleanup is a breeze. Very nice and well built tool.works extremely well. The inserts are a very hard plastic. I saw no deflection or deformation during use, but nice in that they are not metal so no tube marring or scratching potential. Metal outer collar is nice and heavy. The metal collar does not snap together, so if you are not holding the tool, it will split. I didn't find this to be a problem, but thought I could use wire ties if needed to hold the shells together.Great product.Webike too fast.packaging is great, delivery is fast.you may not be my friend but you can take the recommendation if you like.Have a great day View detail
Fits: SUZUKI RM250, SUZUKI RM125, SUZUKI RM-Z450, SUZUKI RM-Z250, SUZUKI DR-Z400SM, KAWASAKI KX450F, KAWASAKI KX450, KAWASAKI KX250F, KAWASAKI KX250 (2019-), HONDA CRF450X, HONDA CRF450RX, HONDA CRF450R, HONDA CRF450R, HONDA CRF450L, HONDA CRF250X, HONDA CRF250RX, HONDA CRF250R, SUZUKI RM-Z450
Worked great, simple and easy.
Each job needs the correct tool to work on motorcycle, this tool made it easy, plus there was no damage to the aluminum nut. Be aware that these may not fit on the fork cap when in the triple clamp, so you may need soft jaws or something else to hold the fork tube. I will probably use tools for loosening and final tightening of the fork cap, but will continue to use these for removing the inner cartridge. A must have tool if you work on your own bike. Just like all of DRC's tool this wrench is nicely made and you can tell it's a quality tool by the weight and feel in hand. I get 95% of my orders delivered short time from Webike. Awesome company, and all the Customer support are top of the line and really show the level of customer service Webike delivers to their customers. View detail
Challenge to Valve Matching
I bought this to Challenge for my first Valve Matching. I think it is good to try everything, but I personally thought that this area should be left to PRO. Also, I think it is not a good way to do it, but the Suction Cup is easy to come off from Valve. I think it is a good cosmetic product because it comes with two types of Compound. View detail
Ease of use of dedicated Tool
Until now, we used to use a home-made tool, but the number of motorcycles owned in our household increased and it was troublesome to change the settings of the home-made tool according to the vehicle, so we introduced a dedicated tool.
The dedicated Tool is good for easily changing oil level settings.
View detail
Fits: HONDA glom, HONDA glom, HONDA MONKEY125, HONDA DAX 125
This tool kit sure makes working on changing the fork springs easier
About quality and texture, I can confirm that the quality is great and that the materials used is a mixture of aluminum and steel that makes up the kit. About the feeling of use, This fork tool kit sure makes working on changing the fork springs easier and can be used on the Monkey 125 forks also. Allows for disassembly without damaging the painted and plated finishes. Products to buy together, Some higher weight fork springs from Kitaco would be ideal to also add to your cart when purchasing this tool kit so you can upgrade the front suspension for better handling. Difficulty of installation, I can say the fitment of the fork tool kit for my installation was very easy due to the simple nature of it's use caused by it's compact design and all inclusive items. Cost performance and comparison with other products, The pricing of the fork tool kit is high for what you receive but the product has a design that makes changing the fork springs easier then using random tools and all the other options are no different in price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Dedicated tools are still easier to use than home-made tools.
I used to use a self-made tool, but now I manage multiple vehicles and it was troublesome to change the oil level for each vehicle, so I purchased the self-made tool. View detail