Reviews
Does not become a DucatiOEM pig
The radius size was exact, but the position of the projection on the hand side was not correct, so I used a grinder to cut it off. There were several similar products available from other manufacturers of external products, and I chose this one because of its quality, but I am satisfied with its thick construction. View detail
Fits: BUELL All vehicles 91- (except 1125R), HARLEY-DAVIDSON SPORTSTERFamily
To remove the Primary.
Used to remove Primary.
It is rather expensive but easy to use.
View detail
Hard Oil is hard.
It is hard to suck up hard Oil. View detail
This makes it easier.
I use it to rub the ROD and it is easy! View detail
OHLINSPreload AdjusterTool
This is a quintessential OEM product.
It is easy to use.
I had bought a brand new OHLINS Suspension for my ride, but when it came time to adjust the Pre-road, I lost this Wrench and had to buy it.
Cospa is not good.
Just expensive.
We recommend that you keep them in a safe place so that you do not lose them.
View detail
Spring Remove
Used for Spring Remove during Chamber maintenance.
Since the price was not that expensive, I thought it would be better to have 1 pc. and bought KITACO.
Difficult to remove, difficult to use the handle part turns when force is needed? Is it good or bad? It seems like it would have been better if it was an integrated unit.
View detail
Used to replace Glass Wool in Silencer
I used it to replace Glass Wool on HUSQVARNA's TE250, which I always use for forest road touring.
To be honest, it was discovered after purchase that the Silencer was rosed with Bolt, and it became unnecessary. However, I tried to hit the Riveter with Drill in one test, destroyed it, and hit a new Rivet with this tool, and it was easy to work with.
The reason I chose this product was the price, which was very inexpensive.
Silencer is a tool that is used only occasionally by those who disassemble the product, so I think this level of tool is sufficient.
View detail
MINIMOTO Minimoto Tappet Adjustment Tool 3-Size Set
Fine-tuning of Valve clearance is more convenient than using ordinary tools
The accuracy of the tools is low and I would like to see the system a little more precise.
View detail
As a primer to make car washing easier.
I used to put my off-road motorcycle on the transporter after a race and ride it home without cleaning the dirt off the body. However, by the time I arrived home, the dirt had hardened into a stubborn stain, making it difficult to wash the bike each time... (And mud falls in the Transporter...) If that's the case, why don't you just clean up the dirt there? So why don't we just clean the dirt off the car locally? I bought this to clean the dirt that gets into the back of the Fender, the footpeg, and the tight spots on the body at the site! I will use it in the future when I have a chance. View detail
HUSQVARNA's Front forkOH with Spec.
I used it to overhaul the front fork of my HUSQVARNA TE250, which I use when I play on forest roads, Enduro, and sometimes Hard Enduro-like activities. I found this product. I was able to loosen the top cap during the overhaul of the fork without any problems.
It is very helpful that these SST-like tools are available from DRC.
Thanks for the good Lineup.
View detail
If you have it, it's safe.
OEM parts are expensive, so I used them on my Z125PRO.
It is used only to prevent the clutch from turning when assembling the clutch.
Some people bite on Wrench or something, but it's too late to do it after it's broken.
View detail
ForkOH essentials
I used it on the Front forkOH of my Triumph STREET TRIPLE that I use in the Main.
With this, the oil level can be accurately and quickly obtained, and the Fork's OH work can be done quickly.
If you want to do your own OH on Fork, you'll want to buy one of these!
View detail
It is better to insert it tightly and close it with Tie Wrap to prevent Air from entering through the Hose.
In normal use, air can be vented, but it is difficult to tell if the air is vented because air enters through the gap between the tubes.
So, insert Valve and Tube and fix them with Tie Wrap to prevent air from entering.
It comes off pretty good.
View detail
Fits: BUELL All vehicles 91- (except 1125R), HARLEY-DAVIDSON SPORTSTERFamily
It's solid
I bought the special one in advance so that I would not have to worry in case of a breakdown. It is expensive but well made. Cost performance is not good. View detail
Easy to use
This Spring hook is durable and easy to use.
It is a must-have item for removing and installing the Full Exhaust System, and is easy to hold and non-slip, so there is no need to worry about getting wounds on the exhaust pipe.
View detail
good looking item
finishing is good. But unfortunatly its broken when i tried to tighten the stemnut. So i was unable to use it too much time. Not a strong item to use in more hard works. View detail
High performance
Spring can be pulled tight.
It is easy to apply force and the Hook's strength makes it safe to work with.
The body is Plating, so it has a high texture.
View detail
At least I could use it.
I used it on a GSX-S1000 FFork.
It may be too thick to fit in some other cars.
I was able to use it on GSX-S1000 FFork for now.
It would be easier to work with if it were a little thinner, but it would prevent scratches on the Cost and Fork side.
I wonder if this is what it would be like if we took it into consideration.
View detail
You can have them individually, if you want.
You can have individual syringes and Tubes, but Quantity:It is a set, so there is no need for hassle.
Also, the Joint that connects the syringe and Hose is also a Quantity:It's very convenient because it's a set.
When removing the syringe from the hose, it is a little difficult to remove due to friction if there is no Joint.
The Joint makes it easy to remove.
You can pull out old Fluid that is fully Tan in the syringe without any hassle.
View detail
It is too large for air venting.
If you're using it to bleed air from a motorcycle, I think it's too large. 30cc might be fine.
I also replace the fluid in my car, so I decided to use 100cc.
The included Oil Resistant Hose will not come out of the Syringe when it is dry, but once it gets wet with fluid, it will easily come out of the Syringe, so be careful!
Please use the supplied Adapter to prevent Hose loss.
This Oil Resistant Hose is difficult to use, so it is better to replace it with SiliconHose to increase work efficiency.
View detail