Reviews
Cheap and convenient
It is useful for bleeding Brake and Clutch.
It is a moment to get out of Fluid, if you enter Fluid from Caliper side, the bleeding time is other than halving.
I think that there is no loss by buying.
View detail
It was saved. ♪
Spindle of GEARShift spindleArm broke and purchased to disassemble Gear case.
Because it could not be disassembled without this tool, it was very useful ♪
View detail
Instruction Manual is also kind and recommended for those who are new
The Instruction Manual is also Recommendation for people who bleed for the first time with easy to understand.
I first exchanged my Fluid by myself, but thanks to this product I went to Smooth very much.
View detail
Essential for bleeding
Brake air bleeding does not start without this! With this, you can put Fluid in SPIDI even if Fluid is empty. View detail
I do not use it much, but ...
It is convenient if there is a product that is not used much. It is dangerous to use for drilling the convex part of the switch box, but suddenly trying to drill it will cause Drill to escape. Although it is a product for that, Handlebaretc which is painted because scratches slightly enter the bar when attached to Handlebar. Please be careful.
View detail
Weight RollerSetting
It is a type anti-rotation tool to engage with Yamaha's ScooterKick gear. Yamaha 2 St System Scooter is available for all models and CYGNUS series.
We can work very efficiently because we do not need a preliminary action for Pulley's attachment and detachment. It is useful when frequently attaching and detaching Pulley, such as when setting Weight Roller.
As a similar tool, I also use the tool of buzzetti, but because it fixes using Screw of Crankcase Cover, it can fix firmly, but it takes a little longer to install. However, here is a simple one that just processed the steel sheet PRESS, so it is Compact so we are using it for car mounting.
As hang of how to use, this product and tools for Center nut as shown in the picture (Such as Ratchet wrench) When you hold the handle of Bear and Clutch at the same time with the handle at a close angle, you can easily get power.
Is it difficult to say that it is expensive for special tools that have no use other than this.
Also, since the part of the handle is not offset, the model (Say or say Engine) Some interfering parts may come out depending on. (Although the picture is AeroX 50R's Minarei MAEngine, since Crankcase 's edge is coming up to Limit, there are practically only Pulley down positions. )
As an introduction to Scooter messy we recommend a universal Pulley holder.
http : / / www. webike. net / sd / 21784446 /
View detail
It is a good product.
I bought it because the price was cheap and it seemed easy to use. It was actually easy to use. I was very happy because it was too early to order from ordering to hand. View detail
At Restore
At NS-1 Restore
Since there was temporary income, I immediately ordered FFork's Seal kit and bought it for adjusting the amount of Oil
As this is essential for oil volume adjustment, buy it for those who are maintained by oneself and there is no loss
Next is WR's Fork oil exchange.
View detail
At Restore
Purchase for removal of Flywheel and Coil from Engine that rainwater entered.
This is recommended to fix Engine
I managed to let my friends support me. I managed to get rid of it somehow ... It was very hard with RustRust ...
Since my NS - 1 is First Model Type, ignition timing will be touched, so I will use it for a while so I think that this price is Reasonable.
View detail
BPF special tool
I bought BPF Motorcycle so I bought it for maintenance.
As a result of various investigations, I think that this product was the cheapest.
If it is 45 mm, it is not a place to be frequently maintained so we do not care about Materials, hardness and precision so much, so I think that COSPA is good.
View detail
Remove Outer Rotor
When I try to restore the NS-1 this time I open it KITACO Outer Rotor is attached
It seemed like it was going to be destroyed when it was crooked, so I was concerned that it was purchased because it was an exclusive item.
Ease of use was easy and easy to remove
If I made this I wonder if I could have made it for myself ... I wonder if it was a little expensive shopping
By the way, since Outer Rotor will be changed to OEM after removal, it is likely to go to warehouse by Set ...
View detail
Other means are ali
Open Pad with Driver, Piston in Pliers - - - This time, I tried it by buying a tool to work with Pad exchange & rubbing out as well. Since the thickness of the Blade part is 2Type, I think that it can correspond to everything if it is Caliper of Motorcycle. We recommend using thickest Blade Priority as much as possible.
To prevent bending of thin Blade. The movement was smooth, and the work was easy.. I feel a bit expensive in terms of price.
View detail
Fits: Others , HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MSX125, HONDA MSX125SF, HONDA GROM, HONDA DAX125, HONDA CT125
To remove Flywheel does not start without this
It is a special tool with few turns but it is absolutely necessary to remove Flywheel!
With this you can easily remove it ♪
Even if you do not have a nickname, you may be able to remove it, but if you break the gap well, it will cost you a higher price
View detail
Easy and cheap!
Air bleeding may be done with guts,
My hands are tiring, my posture is too bad, not a lot of fun.
But, in this case it is easy to bleed out air and fill the Fluid. But since you must understand firmly and use it, let's use it like a primitive air bleed assistance done with only Lever.
View detail
It was a cheap but it worked
I purchased it because I felt the necessity for overhauling the Engine
Let's use exclusive items as we can forcibly substitute other products for damaging parts
It is better to be cheap
Because there seems to be no use of Others, it is regrettable that there is a high possibility of being a fertilizer for Chest once used
View detail
For maintenance
I bought it because it is an essential item to remove Flywheel of APE.
As this and the Fly Wheel Puller are needed, the price has been quite small but it can not be removed if there is no such tool as it is a special tool.
Although it seems not to be used frequently, I am satisfied because it is a product that can be used for a long time.
View detail
Best effect and capacity
Monkey (Z50A) I was looking for a compound for rubbing the valve at engine overhaul and purchased it because it was moderate amount.
I rubbed it with octopus sticks but it was just a special compound and I was able to adjust while feeling rough feeling.
Although it is not frequently used, it is enough to use it a few times since you are riding an old car, so this content is enough.
View detail
Since a Brake fluid can be poured in from the Caliper side since the injector is attached, and it is hard to mix exhaust air, it is dramatically easy-to-use. It was *5 when what has a longer Hose to a slight degree was attached if it may be a
Since a Brake fluid can be poured in from the Caliper side since the injector is attached, and it is hard to mix
exhaust air, it is dramatically easy-to-use.
It was *5 when what has a longer Hose to a slight degree was attached if it may be allowed to wish so much.
View detail
[Webike Monitor] It purchased in order to maintain the Caliper. Since a Piston can be put back easily, it leads to the increase in efficiency of work. Kana somewhat expensive [ if it puts back by the hand, since it is serious in it being vari
[Webike Monitor] It purchased in order to maintain the
Caliper.
Since a Piston can be put back easily, it leads to the increase in efficiency of work.
Kana somewhat expensive [ if it puts back by the
hand, since it is serious in it being various, will think that it has and there is no
loss with it being it being painful, but ]
View detail
[Webike Monitor] It purchased in order to exchange by itself. [ ] since the Japanese description is also attached difficultly [ work ] -- -- it is recommended also in the direction which thinks will carry out Brake-fluid exchange for the fir
[Webike Monitor] It purchased in order to exchange by itself. [
]
since the Japanese description is also attached difficultly [
work ] --
-- it is recommended also in the direction which thinks will carry out Brake-fluid exchange for the first time.
Although
we had also left it to Schopp until now, as soon as it did by itself and cooked,
purchase of was done.
The Maintenance of the
Motorcycle is likely to become increasingly pleasant.
Since it is somewhat expensive, I will merely consider it as the * Minus 1.
View detail