Reviews
It was saved. ♪
Spindle of GEARShift spindleArm broke and purchased to disassemble Gear case.
Because it could not be disassembled without this tool, it was very useful ♪
View detail
Necessities
Exhaust System, STAND etc. Hooking Spring is a lot.
I used to hook Driver or pull it up with Pliers, but I've been scratching it with prying etc. It is convenient.
If it is an Exhaust Spring, there is no problem because there is enough direction to pull on the Exhaust Spring, but Spring of STAND can easily install Spring when you apply weight through the Double-end Wrench of Large eyes.
It is a simple tool but there is not a difference between Large.
If you have parts to remove, one should have one.
View detail
The exchange of Brake fluid became easier
Until now, exchange of Brake fluid was using Oil Resistant Hose and Plastic bottle, but it took time to grasp Brake or to open or close Nut on Caliper side, but if you use this, it will be pulled out I was able to exchange it in a considerable short time.
Although I do not need it, this price is quite satisfactory.
Although I am only plucking out yet, it seems to be able to inject from the Caliper side, so when I exchange Brake hose it will be released from that air bleeding hell
Instruction Manual was also polite and good.
View detail
I will slide to MAJESTYsClutch ★ Outer
Majestys155's
I could use it for Pulley ♪
But -
Clutch outer has
Anything!
This is due to R of Outer shape
I thought that if the convex of Holder was even 2 mm long
There is no dissatisfaction with the rigidity etc. of the product
View detail
Instruction Manual is also kind and recommended for those who are new
The Instruction Manual is also Recommendation for people who bleed for the first time with easy to understand.
I first exchanged my Fluid by myself, but thanks to this product I went to Smooth very much.
View detail
Fits: HONDA monkey, HONDA Monkey R, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Monkey R, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
I used it for MONKEY.
For MONKEYBore up this time, I need to change to Reinforced Clutch and I bought it with Clutch lock nut wrench.
Although I used it the other day, I was using a slightly tight design for Clutch lock nut or firmly with my hand until the back of Lock nut, so I gently tapped it with resin Hammer and used it firmly until I put it all in.
As a result, I could definitely remove Clutch lock nut. I removed the Clutch lock nut removed while lightly rubbing it with Precision Driver.
The price is also conscientious.
View detail
Air bleed Pump
I bought it for replacement of Brake solution.
Using this product made it possible to exchange Brake liquid very easily. Replacement in the absence of this item was very time consuming and I had a hard time with Large change without air.
When this product is attached to bleeder and pulling Pump, almost all of Brake liquid in Hose can be taken up (100 ml and Large capacity is effective).
Those who exchange Brake liquid think that it is better to purchase this product. I want to see if it does not buy a miserable eye.
View detail
Essential for bleeding
Brake air bleeding does not start without this! With this, you can put Fluid in SPIDI even if Fluid is empty. View detail
I do not use it much, but ...
It is convenient if there is a product that is not used much. It is dangerous to use for drilling the convex part of the switch box, but suddenly trying to drill it will cause Drill to escape. Although it is a product for that, Handlebaretc which is painted because scratches slightly enter the bar when attached to Handlebar. Please be careful.
View detail
Clutch Shoe's Spring Remove
I used it for Spring Remove of Clutch Shoe.
Spring could be removed faster, easier than using Slotted screwdriver or radiopen.
The other day, I bought KN project 's Addressv 125 Clutch for Repair Shoe, disassembled Clutch Shoe in a new item and thinly applied Lithium grease to the Shaft hole of the base Shaft 3 and Clutch Shoe side.
Clutch Shoe, which moved Shutch to Free, Clutch Spring removed and Clutch Shoe, whose movement was cool even in a brand new state, now moves to Smooth like a boss in GLADIUS 6502 due to Grease up.
I think that I will Clutch meat to Smooth.
Thanks to this Spring hook, attaching Spring - It was easy to remove both.
View detail
Weight RollerSetting
It is a type anti-rotation tool to engage with Yamaha's ScooterKick gear. Yamaha 2 St System Scooter is available for all models and CYGNUS series.
We can work very efficiently because we do not need a preliminary action for Pulley's attachment and detachment. It is useful when frequently attaching and detaching Pulley, such as when setting Weight Roller.
As a similar tool, I also use the tool of buzzetti, but because it fixes using Screw of Crankcase Cover, it can fix firmly, but it takes a little longer to install. However, here is a simple one that just processed the steel sheet PRESS, so it is Compact so we are using it for car mounting.
As hang of how to use, this product and tools for Center nut as shown in the picture (Such as Ratchet wrench) When you hold the handle of Bear and Clutch at the same time with the handle at a close angle, you can easily get power.
Is it difficult to say that it is expensive for special tools that have no use other than this.
Also, since the part of the handle is not offset, the model (Say or say Engine) Some interfering parts may come out depending on. (Although the picture is AeroX 50R's Minarei MAEngine, since Crankcase 's edge is coming up to Limit, there are practically only Pulley down positions. )
As an introduction to Scooter messy we recommend a universal Pulley holder.
http : / / www. webike. net / sd / 21784446 /
View detail
It is a good product.
I bought it because the price was cheap and it seemed easy to use. It was actually easy to use. I was very happy because it was too early to order from ordering to hand. View detail
Valve stem seal
I bought this product to replace the Valve stem seal because it caused the Oil of the cd 90 to descend. The deciding factor is the price is cheap. I am satisfied with ease of use and cheap price. It can be said that it is an essential item for a 4mini ride. View detail
Smaller than I expected
I confirmed it by hand and confirmed it was smaller than I thought.
It seems to be easy to carry.
You can substitute Coin etc., but this is likely to be used in various ways..
Removing Battery Cap, exchanging Helmet's Visor, opening up Juice's Pull-tab for women, opening a Cover for a mobile tool in SEROW 250, or a useful tool that can be used according to that person.
It is a waste to just use the Timing plug wrench.
View detail
Easy to use with moderate Large criteria
For Brake Caliper exchange, this time Pump was newly adjusted.
The image is trying to insert Fluid from the Caliper side.
I challenged by saying that this method is good with Net, but it did not go well.
I thought that Pump was newly brought up to do this - - - (Tears)
I will decide to insert Fluid from the MASTER side after all.
I bleed out from the Caliper, but it got bigger than the Pump I used before and it got easier to work.
View detail
At Restore
At NS-1 Restore
Since there was temporary income, I immediately ordered FFork's Seal kit and bought it for adjusting the amount of Oil
As this is essential for oil volume adjustment, buy it for those who are maintained by oneself and there is no loss
Next is WR's Fork oil exchange.
View detail
I used it for the first time!
I tried to decompose the Head of APE.
Valve spring compressor was used for the first time, so we can not compare with other products, but Valve could easily Rose.
Since Attachment comes with 3 types, I think whether it can correspond to various heads.
First of all, the price is cheap for beginners became the deciding factor of purchase. It will be used for assembly this time.
View detail
At Restore
Purchase for removal of Flywheel and Coil from Engine that rainwater entered.
This is recommended to fix Engine
I managed to let my friends support me. I managed to get rid of it somehow ... It was very hard with RustRust ...
Since my NS - 1 is First Model Type, ignition timing will be touched, so I will use it for a while so I think that this price is Reasonable.
View detail
BPF special tool
I bought BPF Motorcycle so I bought it for maintenance.
As a result of various investigations, I think that this product was the cheapest.
If it is 45 mm, it is not a place to be frequently maintained so we do not care about Materials, hardness and precision so much, so I think that COSPA is good.
View detail
Required for Fluid exchange!
Brake fluid is essential for replacement. Although it may be good to take out the Brake lever but it takes quite some time, it is better to use this item. If I speak a bit better, I'd like to thank you if Hose is a little longer. View detail