Reviews
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
good
I think it is worth buying because it can be used for various types of cars!
It would be nice to have one, especially for a 4MINI, as it will be used more often!
View detail
Fits: HONDA CROSS CUB, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB 50
Required for Flywheel removal
Required for Flywheel removal
Flywheel came off easily.
I don't use it except to remove the flywheel, so it seems expensive, but I can't work without it, so I don't have a choice.
View detail
Required for Engine disassembly and assembly
This is a special tool needed when disassembling and assembling engines. I use it for disassembling and assembling MONKEY engines. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
AF24Giorno
Used for AF24Giorno.
Coil was easily removed.
View detail
CRF100F (2007) Used in
Flywheel can be easily removed without any problem.
It is only a tool to remove Flywheel, so I wonder if it is cosmetic. Anyway, the Flywheel can be easily removed.
View detail
It didn't work for BALIUS.
I used it for BALIUS, but the Center bolt could not be reached and was unusable.
The diameter of the center bolt is also slightly smaller.
I wanted to change the bolt to a longer one, but I could not find one on the Net because it was an M17 Opposite Thread Screw with a fine pitch.
The construction of the thing itself was good.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Fly Wheel Puller
It worked fine to remove the Flywheel on the NSR50. View detail
Used for CREA SCOOPY
It is a solid product for the price.
I was able to remove the Flywheel easily with no problems.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
We need it.
I use it to work on pulling the Flywheel out of my LEAD 100.
It is introduced only by MONKEY and GORILLA in the suitable car model.
You can use LEAD 100 without any problem.
I don't have a lot of opportunities outside of the Overhaul below the waist, but
When I need it, I need it… I can't work without it….
How many times have you used this product since you became a LEAD Owner and purchased it?
Twice or three times? But I'm a Sunday mechanic and I definitely need it … lol!
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB, KAWASAKI KLX110, KAWASAKI KSR110, HONDA DREAM50, HONDA CUB type Engine(with Cell motor) of MAGNA50 etc.
with Cell motor is this!
I used this product with CUB50Custom with Cell motor.
I had a puller for no Cell, but I didn't know that it was different from the with Cell motor, so it was an urgent purchase.
I did not find anything to complain about.
View detail
Fits: HONDA CROSS CUB, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB 50
If it's the right size.
Used to remove the Outer Rotor on a BANDIT250gj74
Size and Pitch will fit, but it will come off if you prepare a longer one or if you devise a little method because the length of the bolt is short.
It was pretty hard, but I was able to get it off without breaking.
View detail
It's not something you'll use more than once, which is enough.
I was trying to replace the Generator that was no longer generating power, and at the same time, I was trying to replace the StarterClutch that was showing signs of slippage poof.
I bought it because I needed to detach the Magnet rotor.
The price of the Kawasaki OEM SST is too high, so I made an Adapter for this Fly Wheel Puller to fit the Pitch.
It is important to use the air impact to turn the car all at once and to degrease the crank end thoroughly when assembling it.
The texture of the tool was not particularly cheap, and the normal hardened tool steel was used with no problems.
However, considering the fastening torque, I don't think you should think of it as a tool that will last forever once you buy it.
I wonder if I should buy a new one after 3-4 uses.
View detail
Even if it's used infrequently.
I bought it along with the Bore up of SUPER CUB. At first, I struggled to see if I could not manage the tool I had on hand, but as a result, I should have bought it from the beginning. I thought.
Recommendation
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
People who remove the Flywheel are required to do so
The idea of removing the flywheel of MONKEY-type Horizontal TypeEngine Pinpoint is used The frequency of use is low, but if you don't have it, you can't remove it, so it's an essential tool View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
At least it works for now
I used it on a vehicle that was purchased new and is now a year old
There was no rust or anything like that
I struggled a lot
Either the tool will break or the Flywheel will come off
It was a close call
I managed to get it off
View detail
I am satisfied.
I used it in APRIOTYPE 2 when changing the oil pump. I tightened the reverse thread by hand, lightly held it down with the Spanner, and it came off in an instant with the Impact wrench. I don't use it often, but I think it is a good tool to have. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
Unsuitable for adherent flaho
I used it to remove the flywheel from my 30 year old Motorcycle and it was easy to use It's not good
One thing that is not so good is that the Handlebar, which is the part to put the force, is screw shaped and It is the point that it is not possible to work with force, such as biting the Pipe
You might be able to use it for a non-adherent flaho, but remove the flaho when it's not sticking in the first place I don't think there are many opportunities for this
By the way, the Furaho that couldn't be removed by this product came off easily with the OEM tool
View detail
It's cheaper than other products
I am satisfied with the cost performance I haven't compared it with other manufacturers, but it's not used very often It works well enough View detail
not available for wr250r
The body is too long and the Opposite Thread Screw is not long enough please note that it was not available for the wr250r The construction is very solid
I ended up sanding off the outer tube and using it
View detail
Very good
I used it to replace MONKEY's Point and Condenser, and it took a second The Flywheel came off and the Screw is nice and smooth It is easy to use View detail