Reviews
It backfired a little, but I was able to lubricate it successfully.
Lubricated when replacing Clutch Wire. Used Bell HammerSpray. View detail
Cable lubricant
An excellent cable lubricator. I have already tried it, it lubricates well, it can be used for any of your equipment, it is very convenient. I recommend it to everyone. Excellent cable lubricant. I’ve already tried it, it lubricates well, can be used for any of your equipment, very convenient. I recommend to all. View detail
I can't think of anything else.
This Cable Louver and Bell Hammer will make you happy!
Lubrication of the wire cable is completed in one stroke.
Clutchetc. operation system, even if you don't ride Off, the lighter the better, of course.
It is pricey, but well worth the purchase.
View detail
Use it and you'll be convinced!
I gave high marks to Costa, but at first I thought it was expensive!
But if you use it, you will be convinced and impressed, that's all!
No more frustration with Injector!
I definitely want you to use it!
View detail
KIJIMA Wire Injector
I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
-------------------------------------------------- -------- I have long wanted to purchase a lubricant for cables, the choice fell on Kijima. According to the material, I liked everything, it is convenient to work with it. The function is perfectly performed, good price/quality ratio ... I have Long Wanted to Buy A Cable Lubricant, The Choice Fell on Kijima. I Liked EVERYTHING ABOUT THE MATERIAL, IS Convenent to work with it. Function Perfectly Performed, Good Value for Money ... Powered by Google Translator
View detail
It's the only way
I had another wire injector, but when I used it, the oil leaked out and it was no good at all. This one, however, did not leak any oil and did exactly what it was supposed to do. The price may be high, but this is the only way to go. View detail
Items to Buy
Grease does not leak at all and can be properly lubricated all the way to the end.
We recommend that Type vehicles with adjustments in the middle of the Wire lay Dustcloth, as there will be a slight leakage from there.
Note that the type with Dust Boots on the Clutch Side must be removed, otherwise it will only increase the internal pressure and will not come out.
Once the wire is pushed out from the Clutch Side, it is just a matter of stroking the wire by hand and letting it blend in.
View detail
I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful.
I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful. View detail
Although the gummed cloth tape was made cylindrical and the wire was oiled until now, after purchasing this wire injector, working efficiency went up several times. Since it can use throughout life and 1000 yen will not be carried out once it purchase
Although the gummed cloth tape was made cylindrical and the wire was oiled until now, after purchasing this wire injector, working efficiency went up several times.
Since it can use throughout life and 1000 yen will not be carried out once it purchases, in the often lubricated direction, it is recommended.
View detail
DAYTONA Wire Injector Wide Type
About quality and texture - Top quality. Light weight but solid alloy construction with handly knurled adjusting screws. About the feeling of use - Very happy with how this tool has made a job that I avoided in the past now become part of my annual motorcycle maintenance. Products to buy together - Along with a suitable lubricant I recommend the disposable gloves that Webike sell to keep the hands clean as I find this job very dirty and messy with all the lubricant pushing the dirt out from the cable. Difficulty of installation - Simple to set up this tool, just make sure it is firmly pressed up to the cable sleeve to minimise the lubricant leaking out. Apply the lubricant and move the cable thru its full range of motion to help the lubricant on its wayto the other end. Cost performance and comparison with other products - There are a few cheaper options from other brands but I find my other tooling from Daytona Garage great so am sticking wih them for my motorcycle tooling requirement where I can. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - Daytona offer a standard and wide type wire injector for the same price, I would recommend the wide type as it has 2 adjusting screws to firmly secure the tool in place. View detail
You can throw away everything but this.
[How is it used?
of those already using it. Throw away everything but this." The first time I bought the product was when I saw an impression of the product.
It took a lot of courage to invest nearly 5,000 yen in a wire injector, but I was dissatisfied with all the wire injectors I had used so far (*such → https://www.webike.net/sd/2073358/), so I decided to take the plunge and buy one. I was not satisfied with all the wire injectors I have used so far, so I decided to take the plunge and buy one.
In case you are wondering how many times the general wire injector has been replaced (tightening Dial is Quantity:2pc. I have a Set! (and as a result of buying more every time there was a change), so I have 3 or 4, but I don't use them at all.
Classic "Put engine oil in a Vinyl bag and hang it up. This is because you can't hit a Tai KATANA on the method.
Was the one you received as per Image?
As per Image
Translation (Instruction Manual for enter here is included and easy to understand.
How was your experience with it?
Perfection!!!
The oil was perfectly lubricated, with no spurts of oil from the gaps.
What's more! We want to carry out the process of flushing out the dirt inside before lubricating, but until now, the only way to do this was to completely remove the Wire and put it in and out of the kerosene container by hand...etc.
However, with this product, after Parts Cleaner is sprayed, it can be quickly pressed down for cleaning at a great speed.
Gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo gogo!
[Points to note]
The inside rubber packing is oriented.
You will not make a mistake because it is written in the Instruction Manual, but if you lose the Instruction Manual (and you probably will), take a close look at the shape of the Case and Packing to make sure you do not make a mistake.
If you look closely, you can see that the Taper is different!
Also, the Button part to push in is hard at first, so lubricate Large.
If it's not lubricated, it just hurts the belly of the finger that pushes it in.
How did it compare to other products?
The other Cable injector is Garbage.
Replace it now and throw it away.
Points and hangs of ▼ installation/Items to be purchased together/Opinions and requests to the Manufacturer
Other Cable injectors usually have the Body as Material:Aluminum, which is a material with a Body:Plastic, so I'm a little concerned about hydrolysis over time.
View detail
I'm just saying it's easier to do without.
I used it on a Clutch Wire that had become reluctant. I'm not sure if it's a good idea, but I think it's a good idea. It's a must have for me because I'm a bit of a pain in the ass. It is a must have for me as it is very cost effective. View detail
You can throw away everything but this.
[How is it used?
I used to use this type of Cable injector (https://www.webike.net/sd/2073358/), but I wasn't satisfied with it because I didn't feel like I was getting the lube in and it was leaking out.
I heard rave reviews about this product on the Net and wondered if it was true. I thought so I bought it and tried it.
Was the one you received as per Image?
As per Image
Other than that, there is a translation (Instruction Manual of input here is included) that YAZAWA-san may have put in. It is an easy to understand Instruction Manual.
How was your experience with it?
I was able to lubricate it without the lube leaking out due to its shape.
The Stress of lubricating the wires is gone. It is the best.
[Points to note]
There is a direction to the Rubber packing which is shaped like a piece to be put inside.
It is tapered, so you have to frame it so that the taper works.
How did it compare to other products?
The other Cable injector is Garbage. Buy a new one now and throw it away.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think more people would be happy if it were cheaper.
It's a good buy because things are good.
View detail
It keeps the work area clean.
There are two types of Axel warmer, one to pull and one to put back, and by all accounts there's no gap to point the Nozzle through, so I think this is now a necessity, whether it's WAKOS, CRC, or whatever it is, it's a necessity for a motorcycle that's out in the field. View detail
Kang Tan!
I bought it to lubricate the Clutch Wire
It's very easy!
Clutch Wire clipped the Thailand coil from Lever and lubricated the lubrication hole Just push the tip of the oil in and pour it in!
It took about 10 minutes to get the job done with no particular splattering!
I think there is a huge difference in efficiency and ease of doing things with and without them
View detail
I bought this one because of the cool colors. That's all.
There are so many similar injectors. I think they're all by the same factory in China. So why buy this one? I bought it simply because of the cool colors. The red silicone or rubber inside looks different from others. That's all. In terms of functionality, they're all the same. View detail
Convenient
I was concerned about the touch of the needle of Speedometer of my previous car GB 250 CLUBMAN and purchased it for trying CableMaintenance.
Usage frequency is small but convenient.
Grease came out from the opposite side of Cable vigorously and it felt good..
View detail
It is not durable
I have been using it for 15 years..
Although a little hang is necessary for fixing with SingleScrew clasp,
Stable lubrication is possible if you grasp hang.
Even if you say hang, just plug it as far as possible and tighten your eyes.
in short "I will seal it anyway" only.
Same etc. I have never compared strictly with other companies' products, but it is terrible durability.
First of all, Rubber will not be sloppy, torn or collapsed.
15 years I touch various solvents but it is not altered at all. This is a surprise.
Not only the strength of Aluminum Parts but also Anodized is tough and does not feel years.
It's amazing.
It is flashy with Nan Sense color scheme, but this Nan Sense is very
Reliable, rather it looks cool.
Although it is said that you will like gaudy things every year as you get older, but with that
There is none. maybe.
View detail
Attachment attachment for metallic nozzles of is done, and it is dramatically easy-to-use.Although it was working over many hours until now [ ], work became possible [ thanks to this Injector ] for a short time.
Attachment attachment for metallic nozzles of is done, and it is dramatically easy-to-use.Although it was working over many hours until now [
], work became possible [ thanks to this Injector ] for a short time.
View detail