Reviews
Requires some getting used to.
Too thin and spoiled in Bell Hammer's Nozzle.
Is it for a little thicker Nozzles like CRC?
Or is it compatibility with the car model? (Used on deRaster400 and GSR250)
We used it twice and returned to the old method of working with the Vinyl bag to stop and pour.
It also takes quite a while for the lubricant to travel through the Hose and come out from below.
The price is something I would be willing to keep for a trial, so I think it is a good idea to buy one to try it out.
It has been on the market for a long time, so I am sure it is useful for people who are used to it.
View detail
It backfired a little, but I was able to lubricate it successfully.
Lubricated when replacing Clutch Wire. Used Bell HammerSpray. View detail
Cable lubricant
An excellent cable lubricator. I have already tried it, it lubricates well, it can be used for any of your equipment, it is very convenient. I recommend it to everyone. Excellent cable lubricant. I’ve already tried it, it lubricates well, can be used for any of your equipment, very convenient. I recommend to all. View detail
I can't think of anything else.
This Cable Louver and Bell Hammer will make you happy!
Lubrication of the wire cable is completed in one stroke.
Clutchetc. operation system, even if you don't ride Off, the lighter the better, of course.
It is pricey, but well worth the purchase.
View detail
Use it and you'll be convinced!
I gave high marks to Costa, but at first I thought it was expensive!
But if you use it, you will be convinced and impressed, that's all!
No more frustration with Injector!
I definitely want you to use it!
View detail
Before you run out of Wire!
If you don't have a Nozzle made by Gold on hand, you might consider purchasing one.
It is easy to use, but for those who don't maintain it that often, it tends to be a hassle and useless.
Well... I think it would be better to have it to give a sense of maintenance, or not.
View detail
It's easier to work with, but...
Found from WeBig's imprint.
I wanted to see it used myself and bought it lol.
I used it right away.
Certainly, the grease leaks less than the one I used to use. However, the grease spray inlet is too small to fit the grease spray that I have, and it leaked from there.
I wonder if it would be easier to use if I could devise a little more.
View detail
The Wire lube injector lives up to its reputation.
[How is it used?
Used for refueling Wire
Was the one you received as per Image?
Yes
How was your experience with it?
The lubricant reached the tip of Wire better than I had imagined.
[Points to note]
Note the direction of the wire's leak-proof rubber.
How did it compare to other products?
The unit price is high! But after using it, I am convinced. I don't think I will ever use Injector again!
Other items that would be helpful
Opinions and requests to Manufacturer I would like to see the rubber parts issued as Repair Parts, as their lifespan is unknown.
View detail
Best, but not omnipotent.
I became interested in it through a feature article on webike and bought it.
It is significantly better than the common Aluminum Injector, but not completely problem-free.
First of all, it takes time to put it on. The Packing is put through the Cable and the Body is tightened, but the amount of tightening is large and must be turned many times.
When the body is full, the remaining oil leaks out from the slide portion when the body is removed, so curing and dustcloth preparation are essential.
Naturally, it cannot be used with the Cable with Throttle's Guide (the same applies to the conventional product).
I am concerned about the durability of the spiral Cut Packing as it is a special shape and not sold individually.
However, there is nothing better than this in terms of oil feed capacity, and since pressure can be applied at the slide, even hardened old oil can be pushed out at once.
View detail
KIJIMA Wire Injector
I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
-------------------------------------------------- -------- I have long wanted to purchase a lubricant for cables, the choice fell on Kijima. According to the material, I liked everything, it is convenient to work with it. The function is perfectly performed, good price/quality ratio ... I have Long Wanted to Buy A Cable Lubricant, The Choice Fell on Kijima. I Liked EVERYTHING ABOUT THE MATERIAL, IS Convenent to work with it. Function Perfectly Performed, Good Value for Money ... Powered by Google Translator
View detail
Thank God!
I used to use a Wire injector of the type often sold at supply stores, but I couldn't get it to refuel properly, so I bought this one.
I was a little bit worried about the wire injector, but it turned out to be the right decision.
I used Bell Hammer for the Oil and was pleased with how well it penetrated from entrance to exit.
View detail
You can throw away all the other W's except this one.
[How is it used?
The number of large motor cycles with cable-type clutches has increased to two, and although we had a conventional wire injector, it was no longer useful and was left unattended.
I was thinking it was time to clean and lubricate Cable and then I saw the Webike introduction article.
I thought, "This is it! I thought, "This is it! It took more than a month for delivery, but I finally received it the other day and tried to use it right away.
Was the one you received as per Image?
It was bigger than I expected. w The length is about as long as a box of Cigarette.
It seems to be a California-based manufacturer, and although it was manufactured in China, I think the quality is not bad.
How was your experience with it?
Compared to the conventional type of wire injector, Quantity:It takes time and effort to Set.
The procedure is
Turn the body and separate it into two pieces→Pass the Cable through→Attach the black rubber part by wrapping it around the Cable→Screw the separated Body→Lubricate it
I had to shave the tip of the tube to make it thinner, but it is better than too thick because it can cause leakage.
Quantity:Set is time-consuming, but it is possible to properly set theQuantity:If you set the wire injector, it will not leak all over the place and not enter the Cable at all, as is the case with conventional wire injectors.
Every drop of the blow is injected into the Cable and blown out from the other side, which is Large strange and pleasant.
Stress-free.
[Points to note]
Quantity of Rubber parts inside:If the set-up is not properly done, it will leak. Since the structure is sealed at three points including the O-ring and other rubber parts, it will leak if it hardens over time.
There is some concern about durability in that area.
How did it compare to other products?
It is incomparable to conventional wire injectors in terms of leak-free and reliable lubrication.
Exactly Throw away everything but this." W
It is expensive, so it depends on how long you can use it, but I think you will be happier buying this rather than getting frustrated with Gold for a tool you can't use.
View detail
Better than ever!
[How is it used?
I used it to make the clutch a little lighter and to prevent the wire from rusting, since the clutch yawer was replaced.
Was the one you received as per Image?
I'm using it for the first time. YouTube." I tried it after watching the video at
How was your experience with it?
Installation was easy and lubrication came out the other side of the Wire with no leaks.
[Points to note]
Be careful of the direction of the rubber packing that fits into the wire, and press the top part at the end to drain out any remaining lubricant inside.
It is
How did it compare to other products?
The Injector I used to use leaked lubricant from the entrance even when the screw was tightened, and only about half of the lubricant flowed out.
It was like they were not coming.
I don't think I will ever use the old Injector again.
View detail
It's the only way
I had another wire injector, but when I used it, the oil leaked out and it was no good at all. This one, however, did not leak any oil and did exactly what it was supposed to do. The price may be high, but this is the only way to go. View detail
The best, but maybe not all-purpose.
Rumored Cable injector guy.
It is actually well thought out and much easier to use than the traditional Injector.
However, the size of the Cable's length adjustment nut is too large because it is made to enhance sealing. (about M8) In some cases, such as in the case of a Cable, the Injector may not be able to bite into the Cable's sheathing thanks to that section.
Also, sticking Wire× I could not penetrate the Grease with Wire grease with high viscosity.
Anyway, it seemed to work well with low viscosity GreaseorOil, and it is a much better tool than the existing Injector.
View detail
It can be used normally
Used for maintenance of Clutch Wire.
Parts cleaner, OilCleanerretc., and other smooth products can be used without any problem.
When I used Super Wire Grease from YAMALUBE, the grease was so thick that I could not use it properly.
View detail
Somewhat difficult to use
I'm glad it's reasonably priced, but it seems a little difficult to use…
It is not a consumable item, and I wish it were more expensive and easier to use.
The instructions on the back of the Package were easy to understand.
View detail
This is as good as it gets.
It is easy to use as a tool, and actually using it changes the resistance when pulling.
However, if the resistance changes, Wire must have deteriorated to some extent, so I stopped using it after that because I felt that it would be better to replace it properly than to cheat by using a fake blade.
View detail
You can throw away everything but this.
The price seems high, but I have been using Quantity:I was using that hard-to-use example guy for about 5pcs.
I threw them all out a few years ago, but for some reason I bought them on Astro this past February, and when I used them, … yahari… they're so hard to use!
If the fixture is a Quantity:2pc. I bought the one with the Set and was expecting a little more, but…
I have purchased and used this one and my impression is as others have stated in the Title. [You can throw away everything but this. is one of the choices! is
I just purchased it from Astro and would like to give it to a friend. w
View detail