Reviews
It's easier to work with, but...
Found from WeBig's imprint.
I wanted to see it used myself and bought it lol.
I used it right away.
Certainly, the grease leaks less than the one I used to use. However, the grease spray inlet is too small to fit the grease spray that I have, and it leaked from there.
I wonder if it would be easier to use if I could devise a little more.
View detail
The Wire lube injector lives up to its reputation.
[How is it used?
Used for refueling Wire
Was the one you received as per Image?
Yes
How was your experience with it?
The lubricant reached the tip of Wire better than I had imagined.
[Points to note]
Note the direction of the wire's leak-proof rubber.
How did it compare to other products?
The unit price is high! But after using it, I am convinced. I don't think I will ever use Injector again!
Other items that would be helpful
Opinions and requests to Manufacturer I would like to see the rubber parts issued as Repair Parts, as their lifespan is unknown.
View detail
Best, but not omnipotent.
I became interested in it through a feature article on webike and bought it.
It is significantly better than the common Aluminum Injector, but not completely problem-free.
First of all, it takes time to put it on. The Packing is put through the Cable and the Body is tightened, but the amount of tightening is large and must be turned many times.
When the body is full, the remaining oil leaks out from the slide portion when the body is removed, so curing and dustcloth preparation are essential.
Naturally, it cannot be used with the Cable with Throttle's Guide (the same applies to the conventional product).
I am concerned about the durability of the spiral Cut Packing as it is a special shape and not sold individually.
However, there is nothing better than this in terms of oil feed capacity, and since pressure can be applied at the slide, even hardened old oil can be pushed out at once.
View detail
Thank God!
I used to use a Wire injector of the type often sold at supply stores, but I couldn't get it to refuel properly, so I bought this one.
I was a little bit worried about the wire injector, but it turned out to be the right decision.
I used Bell Hammer for the Oil and was pleased with how well it penetrated from entrance to exit.
View detail
You can throw away all the other W's except this one.
[How is it used?
The number of large motor cycles with cable-type clutches has increased to two, and although we had a conventional wire injector, it was no longer useful and was left unattended.
I was thinking it was time to clean and lubricate Cable and then I saw the Webike introduction article.
I thought, "This is it! I thought, "This is it! It took more than a month for delivery, but I finally received it the other day and tried to use it right away.
Was the one you received as per Image?
It was bigger than I expected. w The length is about as long as a box of Cigarette.
It seems to be a California-based manufacturer, and although it was manufactured in China, I think the quality is not bad.
How was your experience with it?
Compared to the conventional type of wire injector, Quantity:It takes time and effort to Set.
The procedure is
Turn the body and separate it into two pieces→Pass the Cable through→Attach the black rubber part by wrapping it around the Cable→Screw the separated Body→Lubricate it
I had to shave the tip of the tube to make it thinner, but it is better than too thick because it can cause leakage.
Quantity:Set is time-consuming, but it is possible to properly set theQuantity:If you set the wire injector, it will not leak all over the place and not enter the Cable at all, as is the case with conventional wire injectors.
Every drop of the blow is injected into the Cable and blown out from the other side, which is Large strange and pleasant.
Stress-free.
[Points to note]
Quantity of Rubber parts inside:If the set-up is not properly done, it will leak. Since the structure is sealed at three points including the O-ring and other rubber parts, it will leak if it hardens over time.
There is some concern about durability in that area.
How did it compare to other products?
It is incomparable to conventional wire injectors in terms of leak-free and reliable lubrication.
Exactly Throw away everything but this." W
It is expensive, so it depends on how long you can use it, but I think you will be happier buying this rather than getting frustrated with Gold for a tool you can't use.
View detail
Better than ever!
[How is it used?
I used it to make the clutch a little lighter and to prevent the wire from rusting, since the clutch yawer was replaced.
Was the one you received as per Image?
I'm using it for the first time. YouTube." I tried it after watching the video at
How was your experience with it?
Installation was easy and lubrication came out the other side of the Wire with no leaks.
[Points to note]
Be careful of the direction of the rubber packing that fits into the wire, and press the top part at the end to drain out any remaining lubricant inside.
It is
How did it compare to other products?
The Injector I used to use leaked lubricant from the entrance even when the screw was tightened, and only about half of the lubricant flowed out.
It was like they were not coming.
I don't think I will ever use the old Injector again.
View detail
You can throw away everything but this.
The price seems high, but I have been using Quantity:I was using that hard-to-use example guy for about 5pcs.
I threw them all out a few years ago, but for some reason I bought them on Astro this past February, and when I used them, … yahari… they're so hard to use!
If the fixture is a Quantity:2pc. I bought the one with the Set and was expecting a little more, but…
I have purchased and used this one and my impression is as others have stated in the Title. [You can throw away everything but this. is one of the choices! is
I just purchased it from Astro and would like to give it to a friend. w
View detail
You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out?
You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out? View detail
-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently --
-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently -- View detail
They are items indispensable to oil supply of a wire for the time being.
They are items indispensable to oil supply of a wire for the time being. View detail
Maintenance!
[How is it used?
Brand:YAMALUBE:YAMALUBE
Wire grease
Item number:907934006000
https://www.webike.net/sd/3460985/
I used it with
How was your experience with it?
This was my first time with Maintenance, and I felt secure because it was firmly fixed in place!
View detail
Less Chemical waste.
It helps with Throttle and Clutch Wire lubrication.
If you don't have one, you can just lubricate it steadily, but if you have to do several, it will take an endless amount of time.
If you have one of these, it's worth buying because it's a big efficiency boost!
View detail
The easiest to use wire injector ever!
I bought this one which caught my eye because I didn't like the operation feeling of Wire injector of common Type.
It is the method that the end of the Wire is jointed to the body of the cylinder shape, Grease is injected into the inside, and Grease is pushed in directly with the piston of the upper part. It is overwhelming smallness of the leak that should be noted, and it is transmitted that it is possible to oil quite efficiently from the appearance of the Grease which overflows from the lower end of Wire. Although I am not accustomed to it, I lubricate Clutch Wire and Throttle Wire, and I am satisfied with a new operation feeling that has never existed before.
Probably it is made overseas, but because Instruction Manual of the translation (please input here) is attached by the agency, it was able to use without a problem. There was an impact to dispose of the Wire injector which I had been using immediately. The price is reasonable, but I felt it was reasonable when I saw that Cylinder and Piston are made by SeaRing firmly. I recommend it.
View detail
Nozzle fits perfectly in the 180ml Yamalube
"Yamaha Yamalube Wire grease Together with.
Nozzle fits the bill!
Although the wire was not completely pinched and leaked a little, it was possible to chain-clean with no problem in Large sturdy degree if Dustcloth was attached to it.
View detail
This is an Ideas thing! It's pretty good
I bought it to try CableLube injection 。
I was wondering if it would be a good idea since it's 3-4 times the price of a regular Cable Louver, but it looks interesting Purchased
It may be a bit of a hassle to set up the installation (injection side & discharge side), but which Cable It's the same with Louver, and I've done it myself, so it should be easy for you guys
I injected the reputedly hard YAMALUBECable lube, which I completed with almost no leaks!
A little leak from the rubber packing at the end of the front side of the photo (anodized thin tube) But it's acceptable 。 An abacus-like rubber that attaches to the Wire's Guide in the Cable LouverV3 There's packing in there, but none of it leaks from there!
I have a feeling that lubricating the Accelerator Wire will be a piece of cake with this! 。
I'll try it soon as it looks like it could be used for bicycles
Cable lube won't go to waste, and if you have one in your family, it may last a lifetime
View detail
It makes working easier
I tried to purchase it because it was easy to inject lubricant oil to Wire and I tried to avoid it.
Work has become much easier.
It is recommended..
View detail
By WireMaintenance
This is convenient, I have not tried injecting lubricant from other parts in Imp, but it is one way. When fixing Wire, it is about 5 mm in tip of wire Tube? Also fix it together, and when injecting lubricant usually from upper hole, hold down Body with Dustcloth and turn the injection hole part as possible as possible Push the lubricant Spray button little by little, inject it, otherwise it will spill out.
Lubricant will flow from the bottom of the Wire if it can be confirmed that it is poured little by little. It is convenient to have it.
View detail
DAYTONA Wide Wire injector
Previously I pecked Oil in a paper funker but I lubricated but I did not last long so I bought it here.
Now Injector is a necessity of wire oil lubrication.
Depending on Nozzle, it leaks somewhat, so it becomes a feeling to be consumed to a large extent, but that may be unavoidable.
Lever works well It feels good.
View detail
Wire Essential items for refueling
Wire I think that it is a necessity for refueling, but I want you to improve a little more. Half the impression that lubricant is leaking from the gap is received. View detail
Required enough function
It is a necessary and sufficient function as Wire injector. Since the screws are two, it is easy to secure the Clutch Wire securely, if you insert the Nozzle securely into the injection hole, you can inject it into the Wire without any particular leakage. Products of this type are simple in structure, but when making details are complicated, even if they follow the product Instruction Manual or General Maintenance Manual, they will not enter straight into the Wire and can leak from the side There was, but this product got into Wire quickly without having any difficulty, so I think that it is made properly.
Although any product may be similar, DAYTONA's products can be purchased with confidence because a certain degree of quality can be expected.
View detail