Reviews
Good rigidity, normal use.
[How is it used?
For Caliper cleaning and OH.
Was the one you received as per Image?
It was bigger than I expected. No problem using it.
How was your experience with it?
It is not cheap and seems to be hard to break.
The grips are soft and easy on the hands.
The feeling of use was good.
How did it compare to other products?
I chose this product because I didn't want to buy a cheap one and have it break immediately or have the piston scratched all over the place. I am glad I chose this product because I clean the Caliper at a relatively high frequency.
If you rarely use it, you can go find something a little cheaper.
View detail
It is easy to use for Piston that is not adhered.
Pistons that are not adhered can be used adequately. However, we cannot pull out a sticking Piston. If the piston is stuck, it is best to pull it out hydraulically. View detail
easy to work with
There is no rattling and the strength is sufficient. There are no problems in gripping, and the workability is good. View detail
It worked fine.
I bought this when I was replacing the Brake Pads on my W800.
Before I bought it. "It's cheap, but I wonder if it's large enough." I thought it was a good idea, but I am glad to say that I had no problems using it as far as I was concerned.
I think it's a little weak, so I'd say it's only for personal use.
View detail
Brake Caliper PistonMaintenance Pliers
Pliers for gripping the Piston of the Brake Caliper.
LargePiston has a concave center, so you can grab it from the inside with Pliers like this one.
This product is the part that grips the Piston (Black part in the picture) It has a butterfly screw to hold the piston in your hand, so it is easy to turn and move the piston.
However, because the above-mentioned ThornThorn hurts the Piston, it can be used without a sense of guilt when it is cured by winding Vinyl Tape.
All in all, it's a must-have for BrakeMaintenance.
View detail
This is enough for personal use.
I bought this for brake maintenance on my Motard 100. The grip part is blue, so the dirt is conspicuous when using it with dirty hands. The grip part is blue, so if you use it with dirty hands, the dirt will stand out. I think black would have been better. View detail
It was helpful
It's easy to grip and grips the piston well. It's so easy to use that I don't think I'll need to use the Fixing Screw.Recommendation. View detail
Doesn't hurt my hands.
The grip is soft so it doesn't hurt my hands when I work with it. I didn't get tired even in long work. View detail
It is convenient to use differently.
The included two plates can be swapped to accommodate various types of brake calipers for efficient use, and the Pistons can be easily pushed in and out of the Caliper and Pistons without straining the Caliper or Pistons. View detail
Front caliper is fine! Rear caliper...?
It was useful for Front caliper Piston.......................... View detail
Four Wheels for VehicleSpec.
When I inserted it into the Caliper of the two-wheeler, it went in to the tip, but not the whole surface. (There are pictures.)
I turned the Handlebar from there, but it takes a lot of force.
It was difficult to work with the Caliper hanging, so I removed the Caliper from the body.
View detail
Convenient for pad replacement.
The Brake Caliper Pistons are easily pushed back in to replace the Brake Pads, which is less scratchy and more efficient than using Pliers to replace them. View detail
Pad replacement is easy.
It can be used with various types of Brake Calipers to help with pad changes, and it can also be used with 2-pod Calipers to reduce the amount of time it takes to push the Piston in one go. View detail
Made by DAYTONA, the trustworthy company
I bought it to clean the Piston when I replaced the Brake Pads By turning the Piston, I was able to clean every nook and cranny View detail
An indispensable tool for BrakeMaintenance
This is a must-have for Caliper overhaul The price is attractive
The whole thing flexes when you apply force to remove the Piston that just stuck to the strength
Also, since the maximum opening size is 37mm, it depends on the type of car, but it's a 2-pot type I can't pinch the Caliper pistons on the..
View detail
It's good enough
I bought this for Caliper OH and rubbing out
Does the Piston of a vehicle left outdoors for 3 years grab no problem? I was able to
This product is very easy to hold in your grip
View detail
It's handy for pad replacement
When changing the brake pads, you can use the pliers on the four-wheeled Large Caliper with some creativity The piston was pushed in, but it is difficult to work on the small for motorcycles I bought it because
When the item arrives and you open the box, is it used? I think it's a bit of a scratch Well, I don't mind it because it is a tool
Because Lever is heavy and hard to turn as it is, after applying Grease to the moving parts, the work is done I worked on it and I managed to do the work
I think it's useful for those who often use cars and motorcycles in relation to Brake
View detail
To return Caliper's Piston.
【What made you decide the purchase?】 Required
To return the Caliper piston at cleaning.
Previously, I was returning by hand, but since Piston was accidentally disconnected.
Cheap Prices.
【How was it actually used?】 Required
Just put it in Simple and rotate it. it's simple.
However, it is somewhat heavy and needs attention. With this you will not lose Piston w
[Is there anything I was disappointed about?] Required
heavy. Big.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Perhaps it is for 4 wheels, but I would appreciate it if you could put out items for two wheels.
【Have you compared items?】 Required
There are no products used for comparison.
[Others] Any
Be careful not to drop it as it is heavy as above. It will hurt injuries and Motorcycle. It would be nice to put it on a small table or the like.
View detail
Since pains was taken over a Piston putting back when Brake pads were exchanged before, it resulted in this purchase. The Piston was able to be easily put back by the engine performance as expected. However, it is very heavy! Although it may be a s
Since pains was taken over a Piston putting back when Brake pads were exchanged before, it resulted in this purchase.
The Piston was able to be easily put back by the engine performance as expected.
However, it is very heavy! Although it may be a strong proof, I think that it is what a little lighter one tends to work to.
Although it is
, on the whole, I hear that work becomes easy and it is very much satisfied with this price.
View detail