Reviews
I chose it for the cospa.
I bought this in a hurry because the Piston Pin was very dirty.
I chose it for its price, but after using it, I am satisfied with its workability and functionality.
View detail
Good rigidity, normal use.
[How is it used?
For Caliper cleaning and OH.
Was the one you received as per Image?
It was bigger than I expected. No problem using it.
How was your experience with it?
It is not cheap and seems to be hard to break.
The grips are soft and easy on the hands.
The feeling of use was good.
How did it compare to other products?
I chose this product because I didn't want to buy a cheap one and have it break immediately or have the piston scratched all over the place. I am glad I chose this product because I clean the Caliper at a relatively high frequency.
If you rarely use it, you can go find something a little cheaper.
View detail
MinimotoBrake Piston Pliers
Purchased because I am replacing the pad with Self. It is inexpensive and easy to use. View detail
It is easy to use for Piston that is not adhered.
Pistons that are not adhered can be used adequately. However, we cannot pull out a sticking Piston. If the piston is stuck, it is best to pull it out hydraulically. View detail
easy to work with
There is no rattling and the strength is sufficient. There are no problems in gripping, and the workability is good. View detail
It worked fine.
I bought this when I was replacing the Brake Pads on my W800.
Before I bought it. "It's cheap, but I wonder if it's large enough." I thought it was a good idea, but I am glad to say that I had no problems using it as far as I was concerned.
I think it's a little weak, so I'd say it's only for personal use.
View detail
It is easy to use
This was the first time I rode Brake's Piston, and I was pleased with how easy it was to use. However, since I have an air compressor, I don't think I needed it. View detail
Brake Caliper PistonMaintenance Pliers
Pliers for gripping the Piston of the Brake Caliper.
LargePiston has a concave center, so you can grab it from the inside with Pliers like this one.
This product is the part that grips the Piston (Black part in the picture) It has a butterfly screw to hold the piston in your hand, so it is easy to turn and move the piston.
However, because the above-mentioned ThornThorn hurts the Piston, it can be used without a sense of guilt when it is cured by winding Vinyl Tape.
All in all, it's a must-have for BrakeMaintenance.
View detail
This is enough for personal use.
I bought this for brake maintenance on my Motard 100. The grip part is blue, so the dirt is conspicuous when using it with dirty hands. The grip part is blue, so if you use it with dirty hands, the dirt will stand out. I think black would have been better. View detail
It was helpful
It's easy to grip and grips the piston well. It's so easy to use that I don't think I'll need to use the Fixing Screw.Recommendation. View detail
Doesn't hurt my hands.
The grip is soft so it doesn't hurt my hands when I work with it. I didn't get tired even in long work. View detail
Lock Function is very useful!
The night of 15 when I thought that all Piston Extractors were the same.
Piston polish that was convenient to use the lock mechanism this time
BlueMagic is seriously awesome!
Well, what I'm trying to say is, congratulations on your marriage, Gacky!
View detail
It is convenient to use differently.
The included two plates can be swapped to accommodate various types of brake calipers for efficient use, and the Pistons can be easily pushed in and out of the Caliper and Pistons without straining the Caliper or Pistons. View detail
Wound goes into Piston.
Used for Caliper piston rub.
It is impossible to pull out the piston without this, unless the piston is in a good mood right after assembly.
There was no hesitation in using it, and it was strong enough to be used for a 250cc single push Single.
The drawback is that the lock to keep the tool open is applied by itself when you notice it, and Stress may boil. It's not a fatal problem, but the Lock Function is not really needed.
In addition, because the edge of the tool bites into the inside of the piston structurally, the piston will be scratched to a small extent. This is unavoidable, but if you are a nervous worker, you must take measures such as biting the Dustcloth.
View detail
Front caliper is fine! Rear caliper...?
It was useful for Front caliper Piston.......................... View detail
Takes some getting used to?
I tried to replace Seal because I removed the Caliper, but it was on the way. "Oh, that's easy! . But I couldn't pull out the whole thing because I couldn't spread it out and lift it up. View detail
Four Wheels for VehicleSpec.
When I inserted it into the Caliper of the two-wheeler, it went in to the tip, but not the whole surface. (There are pictures.)
I turned the Handlebar from there, but it takes a lot of force.
It was difficult to work with the Caliper hanging, so I removed the Caliper from the body.
View detail
Convenient for pad replacement.
The Brake Caliper Pistons are easily pushed back in to replace the Brake Pads, which is less scratchy and more efficient than using Pliers to replace them. View detail
Pad replacement is easy.
It can be used with various types of Brake Calipers to help with pad changes, and it can also be used with 2-pod Calipers to reduce the amount of time it takes to push the Piston in one go. View detail
Made by DAYTONA, the trustworthy company
I bought it to clean the Piston when I replaced the Brake Pads By turning the Piston, I was able to clean every nook and cranny View detail