Reviews
Not much to go on.
It is used for Screwton's extrusion, but may be mangled with Driver.
If you don't want to scratch the Pad, this is the product for you.
I don't think there are many opportunities.
I bought it but used it a few times and put it away.
View detail
Four Wheels for VehicleSpec.
When I inserted it into the Caliper of the two-wheeler, it went in to the tip, but not the whole surface. (There are pictures.)
I turned the Handlebar from there, but it takes a lot of force.
It was difficult to work with the Caliper hanging, so I removed the Caliper from the body.
View detail
Convenient for pad replacement.
The Brake Caliper Pistons are easily pushed back in to replace the Brake Pads, which is less scratchy and more efficient than using Pliers to replace them. View detail
Two (or three) axes are better
I've been using products with a single-core shaft guide
The structure is severely twisted, limiting its use
I think this product is good for GJ in that regard
View detail
useless for the price
I was worried because it was cheap, but I received something that was rather solid
To clean the Brake Caliper, you have to push the Piston back in, but not by hand Impossible
I can do this one
But it's hard to screw in It's hard!
Well, but it's like this
View detail
It's handy for pad replacement
When changing the brake pads, you can use the pliers on the four-wheeled Large Caliper with some creativity The piston was pushed in, but it is difficult to work on the small for motorcycles I bought it because
When the item arrives and you open the box, is it used? I think it's a bit of a scratch Well, I don't mind it because it is a tool
Because Lever is heavy and hard to turn as it is, after applying Grease to the moving parts, the work is done I worked on it and I managed to do the work
I think it's useful for those who often use cars and motorcycles in relation to Brake
View detail
Strong, long-lasting making
Simple, making is steady. It is heavy because it is sturdy, but I think that it is a product that you can use for a long time. I think that it can be used not only for two wheels but also for four wheels. View detail
It is a price. First of all,.
It's expensive, but it's totally better than nothing. It was good.. No problem at all if it is the first tool. You can relax easily. View detail
It is tough and long-lasting
I tried it immediately, but it is a simple making, and it is a sturdy feeling. Of course Piston pushed back firmly. I assumed it from the beginning, but when you remove Caliper, it is a good idea to prepare a little table so that Caliper will not be dangling with Brake hose and put it there. (When you do not remove Brake hose) I think that it is not a frequently used tool, but I think that if you have one, I think that it can be used for a long time, so I decided to use Cospa as Point. View detail
To return Caliper's Piston.
【What made you decide the purchase?】 Required
To return the Caliper piston at cleaning.
Previously, I was returning by hand, but since Piston was accidentally disconnected.
Cheap Prices.
【How was it actually used?】 Required
Just put it in Simple and rotate it. it's simple.
However, it is somewhat heavy and needs attention. With this you will not lose Piston w
[Is there anything I was disappointed about?] Required
heavy. Big.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Perhaps it is for 4 wheels, but I would appreciate it if you could put out items for two wheels.
【Have you compared items?】 Required
There are no products used for comparison.
[Others] Any
Be careful not to drop it as it is heavy as above. It will hurt injuries and Motorcycle. It would be nice to put it on a small table or the like.
View detail
Since the conclusive factor of purchase had the price cheaper than other goods. It is visible and appearance is cheap so that paint application may come off easily. Since the fault is heavy anyhow, it does not turn to carrying.
Since the conclusive factor of purchase had the price cheaper than other goods.
It is visible and
appearance is cheap so that paint application may come off easily.
Since the
fault is heavy anyhow, it does not turn to carrying.
View detail
Since pains was taken over a Piston putting back when Brake pads were exchanged before, it resulted in this purchase. The Piston was able to be easily put back by the engine performance as expected. However, it is very heavy! Although it may be a s
Since pains was taken over a Piston putting back when Brake pads were exchanged before, it resulted in this purchase.
The Piston was able to be easily put back by the engine performance as expected.
However, it is very heavy! Although it may be a strong proof, I think that it is what a little lighter one tends to work to.
Although it is
, on the whole, I hear that work becomes easy and it is very much satisfied with this price.
View detail
[a Webike Monitor] -- The comment of which use which having returned by the hand was impossible and was ordered confusedly was done -- (1) -- it is heavy! Well, since other ones have not been used, it is subjectivity to the last. It
[a Webike Monitor] -- The comment of which use which having returned by the
hand was impossible and was ordered confusedly was done --
(1) -- it is heavy!
Well, since other ones have not been used, it is subjectivity to the last.
It was thought that the work which has stuck the Brake hose needed practice.
it is likely to
break and does not seem to be a part without a function which becomes easy-to-use by putting back and having specialized in the function, or a Parts -- it is simple and strong.
Cost performance While there are goods carried out by the same function, this price is felt as conscientious ?. [ of 7~8000 yen ]
If it is a tool of this level, it is enough unless it is a Motorcycle store used for the moon repeatedly.
Although
one is looking at the goods of various countries at work of sale, even if cheap, structure is different in モノ in which technology of Japan is reflected.
View detail