Reviews
no problem
[How is it used?
To remove the center nut of the clutch
Was the one you received as per Image?
Yes
How was your experience with it?
It can be used with no problem, but you have to apply it firmly and straight.
Easily slanted
[Points to note]
Centrifugal for Clutch Band holder required
It said not to use Impact.
I used Impact when loosening lol.
It is only used when ClutchRose is used, so it is not likely to be used anymore.
View detail
Fits: HONDA NSR50, HONDA GORILLA, HONDA MONKEY
Used for NSR50
Used for NSR50.
It works fine
View detail
Perfect tool when you only have a 3/8 torque wrench!
Worked like a charm for removing the oil spinner and clutch on my 2019 Monkey 125. I bought this because I only have a 3/8 drive torque wrench and almost all the other lock nut wrenches out there require a 1/2 driver. Would highly recomend if you're in a similar position as me. View detail
For Minimoto's Rear suspension7294
The gold amount is affordable, compact, and has a cover at the hand, which is nice. View detail
It's cheap and can be used with many types.
[How is it used?
I use this product to change the hardness of the Rear shock on my two Motorcycles. I bought two of these products.
Was the one you received as per Image?
Image
How was your experience with it?
Cheap but easy to use
[Points to note]
When you adjust it, you have to hold it with your finger while hooking it to use it. Because it is plastic.
How did it compare to other products?
Fixed Type's size is limited, so I think this one is good for many things.
Other items that would be helpful
I think it would be easier to turn if the hooks were a little stiffer instead of floppy.
View detail
Cosy hook wrench
I bought this because I needed it to remove the Stem when I repainted the Frame.
The deciding factor in the purchase
I was not sure of the size, so I bought it because it was a wide Hook wrench with some fit size and it was inexpensive.
It was a deciding factor for me because of the good reviews of the Impreza.
Impressions of use
When I received it, I was worried about whether I could use it properly because the feeling I saw for the first time was very simple, but when I tried to use it, the hook was firmly put and there was no problem.
In addition, I also used it to remove the Spring to clean the Rear Suspension, which also worked well.
I don't think I use it that often, but it helped me because I can use one for multiple areas.
If Torque is not applied, the Hook is slightly difficult to use, but considering the price, Level is not a problem at all.
Products compared
I compared it with Hook wrench of Tool Manufactureretc. I bought it because I could use it for multiple Size and it was inexpensive and had good in-play evaluation.
I compared with other Site, but this price was the cheapest with wide Type of fitment Size.
【Review】
They are inexpensive but do the job well.
It is good that 1 pc can be used for many Size, because it is only a tool that is not used very often unless the suspension spring is adjusted frequently.
View detail
Cospa best
I mainly use it for MONKEY
Removing the Top Bridge and adjusting the rear suspension are not often used It's just a tool and the price is low
I think it's a good tool to have
View detail
Fits: HONDA GORILLA, HONDA MONKEY, HONDA MONKEY BAJA, HONDA MONKEY R, HONDA MONKEY RT
Clutch disassembly essentials
These tools are essential for replacing the Clutch on the HondaHorizontal TypeEngine
I have seen some people making their own sockets by cutting off the sockets, but when you consider the price and quality, you need to buy a special tool to make it I think you should
The Material seems to rust easily, but..
View detail
Can be used for low torque parts, product accuracy is decent
Used to install the StemLock nut on the LITTLE CUB
After replacing the Stem bearing, it was useful for initial tightening during installation
Because of its construction, it cannot withstand high torques and is limited in its use
The downside is that the pivot is too loose and makes the task a bit cumbersome
If you think of it as an auxiliary tool, it's a passable grade
View detail
Better than I expected
Space is limited with Back support and Chain Cover, and the OEM's Does Wrench deteriorate due to excessive use? I bought it because I started to do this, and again, the car-mounted tool was not strong enough and the tip was shaved off, so I had to use it We have changed this Wrench to an on-board tool
As per the Review, it seems to be fine for use in tight spaces
Try using it to change the Rear SuspensionPre-Set, make sure it's in the right position and use both hands It is easy to adjust the length of the car tool when working with the Done
Two suspension, like Mono Suspension both usable, easily and surely changed I think you can
The thickness of the tip is very thick and firm He chewed on it
It doesn't take much force to adjust the rear suspension to some extent with this wrench It seems to be covered
View detail
It is easy to use
There are no springs in the moving parts of Wrench, so I was worried about whether it would work properly, but When I tried to use it, when the torque was applied, it stuck properly and worked fine (One hand needs to be used while holding the other.)
I thought that the length of the wrench was about 16cm in Large size and short, but surprisingly, it feels just right! It was
It has good cost performance and works properly Recommendation
AF24Giorno FrontOne'S&M240mm, RearFORSA270mm, both used for 5-step initial adjustment
View detail
Any model can be used
It's for Minimoto, but I could use it for SS from SUPER CUB
Because the size is small, it is convenient to use it in a small place
It's not too much of a distraction to take with you to a course
It's also cheap
View detail
I feel relieved.
Purchase to do Initial adjustment of Rear suspension.
I purchased this because the size of Nut was unknown.
I can not rely on making it, but I could use it without problems.
Although it is used less frequently, it will be a problem if you do not have it, so do not lose it.
View detail
Fits: HONDA NSR50, HONDA GORILLA, HONDA MONKEY
Can be used without problems
JA 07 Primary side of SuperCUB 110 (Centrifugation) Used for maintenance of Clutch. Pulley holder etc. are necessary to prevent co-rotation, but it was possible to use without problems.
It may be a story limited to SuperCUB 110, but somewhat sitting is bad, as long as the nail length is long. Although it does not matter if used with caution, it is hard to say that it is easy to use.
Because it is cheapest, if you touch the engine around the Honda car, I think you will not lose it if you buy it.
View detail
I bought it for Maintenance around Steering.
Since there are two Motorcycle, Size It is possible to use it steplessly. With the thickness of the moving part, the tool does not enter with the Top Bridge attached. After tightening with this, tightening Nut of Top Bridge was too hard and could not be adjusted easily. Once it was tightened, loosened, tightened, it became in a condition that it was convinced by delicately adjusting it the first time after tightening the Top Bridge.
The tool itself is solid and easy to use.
View detail
Adjustment of Mono Suspension
I used it for the SRX 250 F, I purchased Small Type Wrench because the space is small, but Hook could not move properly. Perhaps my way of doing things was wrong, but I think the Fixed Type is easier to put power. I can not adjust it after all.
Perhaps, it may be good to do it after you have gone sideways and remove some parts you can remove more. I'd like to try again if I can do it..
Even so, because the price is the price, it may be a good product depending on the Motorcycle.
View detail
It is rusty and there is anxiety about durability
I found rust occurred at the moment I saw the bag since the item arrived. There was also rust powder in the bag, Socket also had rust like photo and traces like Oil stain. I paid a lot of money and bought a new item, but I felt like I was grabbed a used item and I am very dissatisfied.
View detail
Custom 中 ♪
I bought it for Rose to paint Front fork.
Without this tool, it was very handy as it could not be removed ♪
However, it would have been better if the part of possession was a little longer.
View detail
For Rear suspension adjustment and Stem tightening
Purchase for Inarial adjustment of Rear Suspension and tightening of Steering stem.
Since Size is also small, it is not an obstacle to put it in a tool box for carrying in Circuit Size.
For FreeNeck, you do not have to adjust the Hook position depending on the place you use.
View detail
Purchase for Stem
Until now, Steering - I adjusted tops red with hitting hanghang with Slotted screwdriver, but I wanted to graduate from such a weak work and purchased it.
When I actually used it, I thought that it was better to have it after all.
Slightly closed condition is not felt by Slotted screwdriver.
Thanks to this, it has always been decided by one shot that we fine-tune the closing condition as many times as usual.
Although it is a tool with less use frequency, I was keenly aware that it is absolutely necessary tool.
It is recommended because the price is cheap, too..
View detail