Reviews
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
View detail
Required for Flywheel removal
Used to loosen the center bolt when removing the flywheel.
Functionality is fine.
The restrains on the Adjustment Bolt were reluctant to move and could not be fixed properly without support.
View detail
Belt has no durability.
[How is it used?
I bought this for EngineO/H when Restore TZr50R.
I fixed the Flywheel with this product and removed the Crankshaft Nut and ClutchGEAR Nut.
Was the one you received as per Image?
The image was exactly as shown in the picture, and although there were several other manufacturers with similar pictures, Minimoto was the cheapest, so I selected Minimoto. I selected Minimoto because it was the cheapest price.
How was your experience with it?
The EngineO/H was successfully used and EngineO/H was successfully used.
However, Belt's durability was almost non-existent, and after a few uses, Belt's reddish coating was falling apart,
Although it can be used for a time, we worked with caution because shavings of the film could enter the Engine.
[Points to note]
When using it for engine O/H, the belt of the Flywheel side and the Holder must be degreased with parts cleaneretc. or it will not slide easily and cannot be fixed. Also, since the handle is short and it is difficult to apply the Torque, it is better to use a PVC pipe or similar to extend the length of the handle.
How did it compare to other products?
I have never used products from other manufacturers, but I have a feeling that the very cheap products sold on the Net are probably from the same supplier, so if you don't buy products from a proper manufacturer and price, you might as well buy Net products on the assumption that they will be crushed.
View detail
Fits: HONDA ZOOMER(Ruckus)
Required for drivetrain maintenance.
This tool is indispensable for removing and installing pulleys and clutches. There are a variety of such tools sold by various companies, and we were not sure which one to purchase, but we chose KN Kikaku's tool this time because of its price and the fact that the company is a manufacturer that handles many ZOOMER parts. There are two types of ZOOMER parts:one is a hook type, like this one, and the other is a type that wraps around the circumference of the product, so you can choose the one you like best. I used the one shown in the photo by fixing it to the ground and had no problem using it. I think this is the most common way to use the Case when working alone. The torque for installation is large, so it is difficult to hold it down with the left hand and tighten it with the right hand. If you do not want to scratch the car body side, I think it will be a good idea to protect it with cloth to prevent wounds. View detail
Restraint device
In overhauling Clutch of SUPER CUB, a tool to fix Clutch became necessary. There were several kinds of tools to fix, but I chose Pulley holder which is tenacious for the time being
Clamp the Holder in Clutch, rotate the handle and tighten it to complete the set. I was able to remove it easily by putting pressure on Lock nut using exclusive Wrench. Clutch that was immersed in oil can also be fixed without slipping
I found out when using it, but Clutch still moves with just being caught in Pulley holder. So when detaching you must hold down the handle or hook it somewhere so as not to move. Naturally? - ω - `)
View detail
Watch Impre
I watched Impre, I decided to buy it as a reference.
Good feeling because it can be used for Clutch exchange and Outer Rotor exchange.
Whether it's a little expensive or not.
I just pray that it will not break afterwards.
View detail
Since the pulley of various motorcycles and a clutch are suited in a general-purpose article, it is found useful. However, it is a fly in the ointment that it is a comparatively very much good price of the general-purpose tool by which usage is restri
Since the pulley of various motorcycles and a clutch are suited in a general-purpose article, it is found useful.
However, it is a fly in the ointment that it is a comparatively very much good price of the general-purpose tool by which usage is restricted a little.
View detail
It purchased for belt exchange super [ DIO ] etc. flexible only for a honda, although there is only for a honda and work progresses -- it does not go away -- it becomes a minus point however once.
It purchased for belt exchange super [ DIO ] etc.
flexible only for a honda, although there is only for a honda and work progresses -- it does not go away -- it becomes a minus point however once.
View detail
It is used for disassembly of the flywheel of a honda transverse engine, and a clutch. Although it is satisfactory to use, I feel [ of MONO ] just for a moment that it is comparatively high.
It is used for disassembly of the flywheel of a honda transverse engine, and a clutch.
Although it is satisfactory to use, I feel [ of MONO ] just for a moment that it is comparatively high.
View detail