Reviews
You look good.
[How is it used?
XR230 Used for Valve Matching
Was the one you received as per Image?
Image
How was your experience with it?
We have completed the Valve matching process without any problems.
[Points to note]
It is a small package, but there is so much in it that you can't use it all.
No problem!
View detail
Solid easily adjustable but sprockets smaller than I required
This tool is multi-purpose; You can use it to remove the variator, flywheel, front sprocket and clutch. This was purchased to enable me to remove the front sprocket for bike. Although it did work, it was rather fiddly to use and the assistance of an additional pair of hands to held was needed. Product solid and quality.The tool itself is looks as though it will last long time. View detail
It backfired a little, but I was able to lubricate it successfully.
Lubricated when replacing Clutch Wire. Used Bell HammerSpray. View detail
Spring in one shot.
I purchased this product for use in Silencer replacement.
Before I bought this product, I had to struggle with pliers and my fingers to finally install it, but I was able to install it in one shot.
It is a part that I am tempted to be stingy with because I don't use it often, but I think there is no harm in buying it because it makes things much easier.
View detail
It worked!
[How is it used?
I purchased this to remove the Pulley area of my PCX125 JF56 as part of a drivetrain refresh.
Was the one you received as per Image?
It was solid and sturdy as per Image.
The weight was quite heavy.
How was your experience with it?
It worked normally. However, I think it was replaced by Air impact, so I didn't have much of a chance to use it.
I would use it again when messing with weight roller etc.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Challenge to Valve Matching
I bought this to Challenge for my first Valve Matching. I think it is good to try everything, but I personally thought that this area should be left to PRO. Also, I think it is not a good way to do it, but the Suction Cup is easy to come off from Valve. I think it is a good cosmetic product because it comes with two types of Compound. View detail
Chain cut easily and conveniently
[How is it used?
Purchased to Cut the Chain purchased with the Restore of the LITTLE CUB that was given to us.
I used to cut the joints of the Piece with an electric sander etc., but by using this product, I can easily chain cut in a short time, which is very convenient.
Was the one you received as per Image?
This product, which is used by our friends and our shop, is reasonably priced and easier to obtain than other products, and can be used for most chains, as it is available in 420, 428, 520, and 525 sizes.
Was the installation difficult?
It may be a little confusing when you are not used to it, but if you read the Instruction Manual carefully before working on it, you will be able to cut it really easily.
It is a safe place to keep in the toolbox of those who like to Restore and those who need Setting, including back and forth Sprocket.
How was your experience with it?
If you read the Instruction Manual carefully before use, the process will be easy.
[Included Parts:were they on?
All the items are shown in the attached picture. I don't know the name of each Parts, so please refer to the picture.
[Was there anything that disappointed you?
I have only used the product a few times, but I have no disappointment or dissatisfaction with the product as expected.
Other items that would be helpful
Point and hang of installation
On the bottom of the Instruction Manual. Cutting the bolt with a cut bolt will damage the tip of the bolt. Use a sander or similar tool to scrape off the crimp. Also, be sure to position the pin so that the tip of the pin is in the center of the crimp. It is stated that
To be honest, even if you use this product out of the blue, you can cut a 420 or 428 size without any problem, but if you want to use the tool for a long time, you should use it according to the Instruction Manual.
If you are still not confident, do not hesitate to ask for a PRO.
[Notes]
With this product. "Disking operations." It is only a tool to Cut Chain.
Please make sure to confirm the number of pieces to be cut in advance to ensure that there are no mistakes.
If you make a mistake and cut too many pieces, the chain will be too short to use.
Also, do not reuse a chain that has been stretched by overuse until it is cut, because the spacing between the pieces has also been stretched, which may lead to wear and tear on the sprocket and damage to the chain even if its strength is within the manufacturer's recommended engine displacement volume. The spacing between the pieces has been elongated, which may cause the Sprocket to wear differently.
[ITEMS TO BUY TOGETHER
A new Chain, each Chemical product needed for its maintenance, and Dustcloth are also useful.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is easy for buyers to afford with Reasonable pricing and a wide range of uses.
View detail
Before you run out of Wire!
If you don't have a Nozzle made by Gold on hand, you might consider purchasing one.
It is easy to use, but for those who don't maintain it that often, it tends to be a hassle and useless.
Well... I think it would be better to have it to give a sense of maintenance, or not.
View detail
KIJIMA Wire Injector
I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
-------------------------------------------------- -------- I have long wanted to purchase a lubricant for cables, the choice fell on Kijima. According to the material, I liked everything, it is convenient to work with it. The function is perfectly performed, good price/quality ratio ... I have Long Wanted to Buy A Cable Lubricant, The Choice Fell on Kijima. I Liked EVERYTHING ABOUT THE MATERIAL, IS Convenent to work with it. Function Perfectly Performed, Good Value for Money ... Powered by Google Translator
View detail
Used to replace Glass Wool in Silencer
I used it to replace Glass Wool on HUSQVARNA's TE250, which I always use for forest road touring.
To be honest, it was discovered after purchase that the Silencer was rosed with Bolt, and it became unnecessary. However, I tried to hit the Riveter with Drill in one test, destroyed it, and hit a new Rivet with this tool, and it was easy to work with.
The reason I chose this product was the price, which was very inexpensive.
Silencer is a tool that is used only occasionally by those who disassemble the product, so I think this level of tool is sufficient.
View detail
It can be used normally
Used for maintenance of Clutch Wire.
Parts cleaner, OilCleanerretc., and other smooth products can be used without any problem.
When I used Super Wire Grease from YAMALUBE, the grease was so thick that I could not use it properly.
View detail
Shoo, Pushing, Shoo, Snap
Used for new Valve replacement work on CUB.
I had to replace my previous tacho bar because the Rubber had been ruined.
The feel of the product is the same as the previous one.
The tacho did not come off and could be worked normally.
It's not a task I do very often, but I appreciate being able to purchase it because I can't move forward without it.
It also comes with Compound, which is helpful.
I hope that the Red Lead used for marking will also be available in the size of the Compound included with this product.
View detail
This is as good as it gets.
It is easy to use as a tool, and actually using it changes the resistance when pulling.
However, if the resistance changes, Wire must have deteriorated to some extent, so I stopped using it after that because I felt that it would be better to replace it properly than to cheat by using a fake blade.
View detail
Items to Buy
Grease does not leak at all and can be properly lubricated all the way to the end.
We recommend that Type vehicles with adjustments in the middle of the Wire lay Dustcloth, as there will be a slight leakage from there.
Note that the type with Dust Boots on the Clutch Side must be removed, otherwise it will only increase the internal pressure and will not come out.
Once the wire is pushed out from the Clutch Side, it is just a matter of stroking the wire by hand and letting it blend in.
View detail
I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful.
I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful. View detail
They are items indispensable to oil supply of a wire for the time being.
They are items indispensable to oil supply of a wire for the time being. View detail
[the attached vehicle type and mileage] -- vehicle type: -- benly 90S (frame numbered machine: HA03-1600XXX) mileage: -- it purchased to the grease up of about 15000-km [reason for purchase] wires (an axel, a front brake, a clutch). [Comment and cauti
[the attached vehicle type and mileage] -- vehicle type: -- benly 90S (frame numbered machine: HA03-1600XXX) mileage: -- it purchased to the grease up of about 15000-km [reason for purchase] wires (an axel, a front brake, a clutch).
[Comment and cautions at the time of attachment] There is no fault in a motion of wires and I thought that grease up might still be unnecessary.
However, the slide became good, so that he was surprised, and after grease up became very good [ a usage feeling ].
Although the grease up work of a wire was not difficult and was carried out, troubles were suffered comparatively.
After a fundamental work procedure loosens and removes a wire, grease is only poured in using this product (wire injector).
In my case, pains was taken over pouring of grease.
Attaching a wire injector certainly was a hang which works well.
It seems that it is good to once stop pouring and to reattach an injector when grease blows off.
In order that a tool might remove wires other than an injector, the open wrench (8, 10, 12 or 14 mm) and the phillips screwdriver were used.
Special care of the grease up work of a brake wire and a clutch wire was not carried out.
However, because the die length of the wire which can be pulled out was short, attachment of an injector was moved by carrying out difficulty for some.
An axel wire (in the case of the benly 90S) has an exit in the inside of a carburetor.
Grease up was performed after removing the throttle bubble portion, before pouring in grease.
In addition, the KURE silicon grease mate which invades neither a rubber nor resin was used for grease.
View detail
-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently --
-- kijima: -- KIJIMA:wire injector product number: -- in the case of maintenance of 302-206 correspondence vehicle type wide use description-of-item blue twin type wires, lube, such as wire grease, can be poured in efficiently -- View detail
You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out?
You do not have, if it is those who do light maintenance by themselves, and isn't loss carried out? View detail
No spare Suction Cup
As pointed out in other reviews, LargeSmallQuantity on the Right Side of the photo:There is no spare Suction Cup for 5pcs. each. Suction Cup at both ends with stick (LargeSmall1 each) and Medium Eyes, and Quantity of Fine Compound:Set. I have no problem with this because I was convinced to buy it.
I used it to match the new Valve on my VIRAGO250, the Large one is for the Intake Valve and the Small one is for the Exhaust Valve.:Set was really helpful.
Well, this kind ofQuantity:I think those who buy Set do not need a lot of spare parts.
View detail