Reviews
Can be used without problems
This is the first Chain Tool I bought, so I can't compare it with others, but I had no problem using it.
Since the cast surface of the Gold genus is intact, it is likely to rust the next time it is used unless it is treated against rust after use.
View detail
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
View detail
Requires some getting used to.
Too thin and spoiled in Bell Hammer's Nozzle.
Is it for a little thicker Nozzles like CRC?
Or is it compatibility with the car model? (Used on deRaster400 and GSR250)
We used it twice and returned to the old method of working with the Vinyl bag to stop and pour.
It also takes quite a while for the lubricant to travel through the Hose and come out from below.
The price is something I would be willing to keep for a trial, so I think it is a good idea to buy one to try it out.
It has been on the market for a long time, so I am sure it is useful for people who are used to it.
View detail
On roadMain for people who clean regularly.
[Feeling of use]
Brush has 3 sides for quick cleaning.
The softness of Brush is hard.
Brush is hard and dirt bounces off when rubbed hard.
Brush is difficult to apply to small areas, so it is better to prepare a soft brush separately for hard stains.
(Points to note)
Brush width can be changed, but when the width is made narrower, the brush cannot be fixed and immediately comes off, making it unuseable.
View detail
Chain cut
Since the installation chain is unknown, I bought a little longer and bought this one for a trial because it was cheaper here to cut it.
Although it will not be used often, it corresponds to chain size, 420 to 530, so it will be useful to have 1 pc.
It seems sturdy for the price, and seems to be fine for use.
View detail
Required for Flywheel removal
Used to loosen the center bolt when removing the flywheel.
Functionality is fine.
The restrains on the Adjustment Bolt were reluctant to move and could not be fixed properly without support.
View detail
Nothing too good, nothing too bad.
This tool is necessary for pre-road adjustment of shock absorber.
Universal tool.
The quality, the feel, the price, everything is normal.
View detail
Does not become a DucatiOEM pig
The radius size was exact, but the position of the projection on the hand side was not correct, so I used a grinder to cut it off. There were several similar products available from other manufacturers of external products, and I chose this one because of its quality, but I am satisfied with its thick construction. View detail
Fits: BUELL All vehicles 91- (except 1125R), HARLEY-DAVIDSON SPORTSTERFamily
To remove the Primary.
Used to remove Primary.
It is rather expensive but easy to use.
View detail
Before you run out of Wire!
If you don't have a Nozzle made by Gold on hand, you might consider purchasing one.
It is easy to use, but for those who don't maintain it that often, it tends to be a hassle and useless.
Well... I think it would be better to have it to give a sense of maintenance, or not.
View detail
It's good enough unless it's really sticking or something.
This is very useful if the Torque can be removed without applying that much Torque.
It is a good choice for many sizes, so I would say that this one is all you need.
However, if it is super sticky, it is better to use a shape product that can use Impactetc. instead of this kind of Type.
If you extend it with Pipe and apply Torque, it will indeed bend.
View detail
Hard Oil is hard.
It is hard to suck up hard Oil. View detail
This makes it easier.
I use it to rub the ROD and it is easy! View detail
OHLINSPreload AdjusterTool
This is a quintessential OEM product.
It is easy to use.
I had bought a brand new OHLINS Suspension for my ride, but when it came time to adjust the Pre-road, I lost this Wrench and had to buy it.
Cospa is not good.
Just expensive.
We recommend that you keep them in a safe place so that you do not lose them.
View detail
Spring Remove
Used for Spring Remove during Chamber maintenance.
Since the price was not that expensive, I thought it would be better to have 1 pc. and bought KITACO.
Difficult to remove, difficult to use the handle part turns when force is needed? Is it good or bad? It seems like it would have been better if it was an integrated unit.
View detail
Used to replace Glass Wool in Silencer
I used it to replace Glass Wool on HUSQVARNA's TE250, which I always use for forest road touring.
To be honest, it was discovered after purchase that the Silencer was rosed with Bolt, and it became unnecessary. However, I tried to hit the Riveter with Drill in one test, destroyed it, and hit a new Rivet with this tool, and it was easy to work with.
The reason I chose this product was the price, which was very inexpensive.
Silencer is a tool that is used only occasionally by those who disassemble the product, so I think this level of tool is sufficient.
View detail
Common Chain brush
The three-sided type from various manufacturers.
Brush. I used to use it before.
If the Cleaner bounces on the Wheel or
You have to do it twice or you have to worry about the order.
I can't wash my car and now I don't have enough Space for washing my car.
I use Tooth Brush because I can't do it.
I wash the whole car body at once and hose water.
I can use it! I think it would be very useful in situations where
The opposite is Straight's Brush, which I don't know how to use.
I didn't know what to do, so I stabbed it from under the Chain, and the gap hardened.
I used to use it to get dirt off of them, but as a result...
Seal was also hurt to shreds, so that's how I used it.
No recommendation…w
View detail
The best, but maybe not all-purpose.
Rumored Cable injector guy.
It is actually well thought out and much easier to use than the traditional Injector.
However, the size of the Cable's length adjustment nut is too large because it is made to enhance sealing. (about M8) In some cases, such as in the case of a Cable, the Injector may not be able to bite into the Cable's sheathing thanks to that section.
Also, sticking Wire× I could not penetrate the Grease with Wire grease with high viscosity.
Anyway, it seemed to work well with low viscosity GreaseorOil, and it is a much better tool than the existing Injector.
View detail
MINIMOTO Minimoto Tappet Adjustment Tool 3-Size Set
Fine-tuning of Valve clearance is more convenient than using ordinary tools
The accuracy of the tools is low and I would like to see the system a little more precise.
View detail
It can be used normally
Used for maintenance of Clutch Wire.
Parts cleaner, OilCleanerretc., and other smooth products can be used without any problem.
When I used Super Wire Grease from YAMALUBE, the grease was so thick that I could not use it properly.
View detail