Reviews
The stuff is good, but I didn't need it!
Purchased to remove Locker Arm on xs250sp 4a8.
I bought it without checking because it was mentioned in the tool section of the service manual and was also used in the photo of the procedure for removing the Locker Arm.
As a result, the Bolt of Locker Arm was M8 and the size was not M6.
If you check the photos of the procedure carefully, it is just a Bolt. The color is different!
I bought a M8×180mm Bolt for 300 yen at a nearby Home center and was able to remove it successfully.
Things are good. I just didn't need it.
View detail
A delightful tool is cheap. Although rarely used, if it is strained, it bends simply, and a tool will be broken if it does not use often seeing.
A delightful tool is cheap.
Although rarely used, if it is strained, it bends simply, and a tool will be broken if it does not use often seeing.
View detail
OEMs are sure.
Since it is an OEM, I don't think this is the best way to go about it.
I don't know until I need to be concerned about OEMs.
View detail
Maybe we didn't need to.
I bought this to remove the locker arm shaft from my SR400, but I didn't need to use the slide hammer. I didn't need to use the slide hammer. I just screwed it in and pulled lightly, and it came out easily.
If you have a bolt that is as long as the screw diameter of the Locker Arm Shaft, it should be sufficient.
View detail
Maybe we didn't need to.
I bought this to remove the locker arm shaft from my SR400, but I didn't need to use the slide hammer. I didn't need to use the slide hammer. I just screwed it in and pulled lightly, and it came out easily.
If you have a bolt that is as long as the screw diameter of the Locker Arm Shaft, it should be sufficient.
View detail
MOTORCYCLE TOOL
Hello, I am very satisfied with the product, very fast shipping, very good communication, order tracking,
I thank you for this service, cordially Mrs BROQUET ---------------------------------------- ---------------- Hello, I am very satisfied, the product, very fast, very good communication, order follow-up,
Thank you for this benefit, Regards Mrs GROQUET
View detail
Crankcase separating tool YamahaOEM
I wanted to divide Engine which is falling into the house somehow and purchased it. I broke it for the first time, but it was easy to break. It's easy to use OEM tool.
A tool is an organism - - - So it is in the tool box in the Large thing. It is not bulky and it does not get in the way, it is recommended..
View detail
It is Crankcase decomposition for the first time. Since it was the Engine into which water went for a while, the Case was opened in fear. It is not like [ which was considered ], either, and the rust of Mission part exchanges a Bearing and Seal
It is Crankcase decomposition for the first time.
Since it was the Engine into which water went for a while, the Case was opened in fear.
It is not like [ which was considered ], either, and the rust of
Mission part exchanges a Bearing and Seals just to make sure, and is a schedule of re-inclusion.
Since the
Crankcase separating tool was a pure Tool, it was able to be used in comfort.
View detail
It was used at the time of the decomposition maintenance of a head by YAMAHA TW200, 236. If there isn't this, a locker arm shaft will not be pulled out. It is anindispensable tool for those who put a hand to an engine.
It was used at the time of the decomposition maintenance of a head by YAMAHA TW200, 236. If there isn't this, a locker arm shaft will not be pulled out. It is anindispensable tool for those who put a hand to an engine. View detail
It is used for Engine decomposition of TW200. It uses, using together with Rocker-arm Puller. -- it is unexpected to make and make a hole on one's own to steel, although it is a mere Weight -- a Thailand -- it is strange. High kana is alt
It is used for Engine decomposition of TW200.
It uses, using together with
Rocker-arm Puller.
-- it is unexpected to make and make a hole on one's own to steel, although it is a mere Weight -- a Thailand -- it is strange.
High kana is although considered somewhat. Considering a result, it is satisfactory.
It is although I will think whether to be easy to give an Impact if there is weight to a slight degree. It can be used without a problem.
View detail
It used, when taking a Head into pieces. It is easy to be so so [ quality ], and it is excellent in the Cost performance. It separated also from the Rocker arm shaft which it tended to adhere to from several times of Impacts. Considering re
It used, when taking a Head into pieces.
It is easy to be so so [
quality ], and it is excellent in the Cost performance.
It separated also from the Rocker arm shaft which it tended to
adhere to from several times of Impacts.
Considering
result, it is satisfactory.
The Weight for Shaft Pullers was also used simultaneously.
View detail
The crank needed to be broken for exchanging the return spring of the kick starter of honda Elsinore (MT125). the other company -- although it was pure, also that it is handy and functionally the price also came out enough, and carried out. a hang
The crank needed to be broken for exchanging the return spring of the kick starter of honda Elsinore (MT125).
the other company -- although it was pure, also that it is handy and functionally the price also came out enough, and carried out.
a hang does not get impatient -- slowly .
It is lightly the best with a beat at PURAHAN.
View detail
It is cheap, can use and is large satisfaction. I would like to arrange a pure special tool very much. Since it became a cause of oil leakage, and a cause of a crack by marks even if it carries out an engine rose by a suitable tool, the tool was a
It is cheap, can use and is large satisfaction.
I would like to arrange a pure special tool very much.
Since it became a cause of oil leakage, and a cause of a crack by marks even if it carries out an engine rose by a suitable tool, the tool was arranged.
View detail