Reviews
Common Chain brush
[How is it used?
I use it to clean the Chain on my road motorcycle.
Was the one you received as per Image?
It is a common Chain brush as shown in the Image.
How was your experience with it?
I was a little worried about damaging the Seal.
For the 3-sided Brush portion, one side floated on 530Chain.
Brush width can be adjusted to match Chain size! so I will try to adjust it next time.
But not at the height of Brush. "width" So I wonder if it doesn't make much sense or not.
I haven't found much use for the long Brush at the end of the handle (laughs).
How did it compare to other products?
I used to use a 3-sided Chain brush from another Manufacturer, but there is no difference.
The only difference is the color.
View detail
It's easy.
This product is very useful for removing dirt from Drive chain.
It saves time because three surfaces can be polished at once.
Brush is not too hard and not too soft, which allows for smooth chain cleaning.
View detail
Good brush
Nice and simple brush View detail
Polish Chain from three directions to remove dirt.
This product has a firm Brush and can polish the Chain well from 3 directions. Just wish the price was a little lower! View detail
It can be used normally
It is easier to be an Overhaul of Fork.
It is not expensive and you should have it.
The quality is pricey, but it's good enough to do what I want to do.
I have no problem at all with this product.
View detail
Easy to use
I think it is a good cosmetic tool.
The handle made it easy to apply force.
View detail
Can't clean even the smallest part. The bristles are hard and may damage the seal.
[How is it used?
For cleaning the chain of Ninja 400.
How was your experience with it?
The bristles are harder than I imagined, and if you scrub with too much force, you might hurt the seal. I can't go into the detail like the tooth brush, so I can only clean roughly.
After using it a few times, I came to the conclusion that it was the strongest tooth brush after all, and I had it sleep in the warehouse.
Chain is just a rough cleaning! I don't use it anymore. I don't use it anymore because I want to keep it as clean as possible.
[Points to note]
As mentioned above, the hair is hard, so it's best not to scrub too much.
How did it compare to other products?
The bristles are a lot harder than the typical shoe brush-like ones that come with Chain cleaner.
[Opinions and requests to Manufacturer
It might be nice if they made the bristles a little softer.
View detail
Ideal for ChainMaintenance
This is a very efficient cleaning brush for the maintenance of the drive chain, it can clean the back side of the link plate and the three sides of the roller at once, which is very efficient and saves time for chain maintenance. The hardness of the brush is optimal and can be used safely on the chain. View detail
Chain will come in handy!
Saves you time because you can clean all three sides at once!
For those of you who do your own ChainMaintenance, this is really a Recommendation.
By the way, I still don't know how to use Brush with a long tail.
View detail
Once you use it, you can't stop.
I use it with Degreaser.
It's nice to be able to clean in three directions at the same time.
The brush is not too hard and not too soft, just right.
However, the details may be more beautiful with Tooth Brush!
View detail
Easy to remove dirt.
Cleaning the drive chain is quite a large amount of work, but you can polish 3 sides at once. The brush is not too hard and not too soft, so it is effective for chain cleaning. View detail
Efficient Brush.
The longer Brush removes large amounts of dirt and the 3 Brushes allow you to clean 3 sides at once, making chain cleaning time much shorter and more efficient. View detail
Cut the time by a third.
It is very efficient to clean the drive chain on 3 sides at the same time. The moderately hard and long nylon brushes are gentle on the chain and easy to clean. View detail
no problem
I bought this because I lost the chain brush I was using before.
Last time I bought one from We-BigGarage, but they didn't have the same one, so I went with this one.
I have no problems with the feel, etc.
View detail
I don't know
it takes a lot of time to prepare various parts and tools for the first time to adjust the carburetor I bought it I've been looking at the ratings, and I think it's fine for me as long as I get the benefits of the price View detail
Was it meaningless as it was not enough for this?
I repeatedly disassembled and assembled with a mysterious Overflow, so I tried to buy it as well as Jet.
But since we need many tools before disassembling and assembling the carburetor, it was meaningless to try it as a special tool here.
On the contrary, because I am a cross, I feel like it will be over Torque.
I think that the universal tool I have used is better, people who have Universal Product do not need to buy it.
It seems to be a tool just to crowd the tool box. Since only the atmosphere is nice, the spirit may enter - - -
View detail
Turning the stuck Jet, the tip deformed...
When trying to loosen the stuck Jet, the tip of the Driver easily deformed, and the Plating also peeled off.
"* Light TorqueSpec. For Carburetor it can not be used for. Although it is being done in the Instruction Manual, it is said that it will be broken so easily.
After all, Jet fixed it purchased a normal slotted screwdriver again at home center.
I think that this product can not be used very much for a long-term leaving carburetor that Jet species may be stuck.
View detail
after all - - -
I bought it for Main jet for Replacement and free shipping fee.
As I thought, I could not use it because of Space problem.
Plating also peels off at Torque of Jet
It was a place where Plating was entering in the room Float indoors.
View detail
Valve stem seal
I bought this product to replace the Valve stem seal because it caused the Oil of the cd 90 to descend. The deciding factor is the price is cheap. I am satisfied with ease of use and cheap price. It can be said that it is an essential item for a 4mini ride. View detail
I am graduating from a tooth Brush
I bought it for trial because I heard that it is soft eyes Brush. I certainly think it's soft. However, rubbing the O-ring part of the Seal chain with a hard brush is not good for mental health, so I think whether this hardness is good. Too too stubborn dirt is only to use the tooth Brush together, and dirt will not get bad if it keeps on a regular basis.
I think Brush attached to the bottom of the handle is unnecessary?. It's soft and Brush is long, so I can not find how to use it (Lol)
View detail