Reviews
Stop guessing and use this tool to set your oil level.
Easy to use, clear markings on the tube. My only complaint is that the tube and hosing can separate when attempting to push fluid out of the syringe back into the fork oil container too quickly and creates a mess. A small hose clamp might solve this. Another one of those tools you don't really need but makes the job of adjusting fork oil levels a no brainer. Between the dirt bikes and mountain bikes this will pay for itself and allow making adjustments much easier. And, if you can let your buddies borrow it if they buy the beer, it is a win win. View detail
Fits: HONDA ZOOMER(Ruckus)
KN Planning Exclusive Tool for Disassembling of Drive System
I bought it because I thought it would be universal to some extent, although it was designed to be used with ZOOMER.
Exclusive Tool for Disassembling of Drive System". This is a straightforward Naming product, but it is a proper product name.
The common trade name is Universal holder.
As the name suggests, it is used to prevent parts from turning when removing the clutch or pulley face of the scooter.
I used it to service my ADDRESS V100, but I feel like I need to think carefully about where the force is applied to use it on the Pulley face side.
I use it with electric Impact wrench as a supplement.
View detail
Easy to use.
I bought this for servicing an acquaintance's Address, but bought a 46mm usable one to use for servicing MAJESTY 250.
The clutch can be easily disassembled and is firm and thick enough to be used safely.
View detail
Fits: HONDA ZOOMER(Ruckus)
Required for drivetrain maintenance.
This tool is indispensable for removing and installing pulleys and clutches. There are a variety of such tools sold by various companies, and we were not sure which one to purchase, but we chose KN Kikaku's tool this time because of its price and the fact that the company is a manufacturer that handles many ZOOMER parts. There are two types of ZOOMER parts:one is a hook type, like this one, and the other is a type that wraps around the circumference of the product, so you can choose the one you like best. I used the one shown in the photo by fixing it to the ground and had no problem using it. I think this is the most common way to use the Case when working alone. The torque for installation is large, so it is difficult to hold it down with the left hand and tighten it with the right hand. If you do not want to scratch the car body side, I think it will be a good idea to protect it with cloth to prevent wounds. View detail
Used to measure Fork oil level.
There are many ways to adjust the oil level in Fork, but this is the best way to get the most out of it.
It was easy to adjust by simply inhaling.
Syringe "Syringe" The durability of the "C" is a bit poor, and after about a year of use, cracking occurs.
Syringe itself is about 300 yen for a Single Item.
I think it is a good deal.
View detail
I'm just saying it's easier to do without.
I used it on a Clutch Wire that had become reluctant. I'm not sure if it's a good idea, but I think it's a good idea. It's a must have for me because I'm a bit of a pain in the ass. It is a must have for me as it is very cost effective. View detail
It's easy to use, but you'll start sweating from the Hose part soon.
Purchased in conjunction to get in tune.
It was easy to use, but it makes me sweat right out of the hose area.
I'm not sure if the Hose is properly Gasoline resistant.
It's not a problem, though, because I don't use it often.
View detail
You can do without it, but it's better if you have it.
If it's 650 yen, it's convenient to have one if you buy it while you're there and get free shipping.
The Clutch Wire was cleaned with Parts cleaner, lubricated with CRC556, and finished with for CableGrease spray, and the Clutch was lightened.
View detail
It keeps the work area clean.
There are two types of Axel warmer, one to pull and one to put back, and by all accounts there's no gap to point the Nozzle through, so I think this is now a necessity, whether it's WAKOS, CRC, or whatever it is, it's a necessity for a motorcycle that's out in the field. View detail
Necessity of maintenance
Scooter drivetrain maintenance essentials
We can't start without it.
But it's hard to use it for anything else, the fate of specialized tools …
I think I'll use this on Sunday to trade the Weight Roller for the Belt …
View detail
Weight roller replacement
I used it to change the weight roller and it was my first time to do so, but it was done
However, I won't be using it for the time being
As a Sunday mechanic, this is good enough for me
View detail
Gasoline got color.
【What made you decide the purchase?】 Mandatory price
【How was it actually used?】 Required Use is cheap.
【Was it difficult to install? (Hard parts case)】 It's simple.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] If you leave the essential Gasoline in it, the inside looks Yellow.
【Hope for Manufacturer - Please tell me if there are any improvement points】 If it is essential decay Motorcycle Hose diameter does not match.
【Have you compared items?】 Required Wig Big's Hat
[Others] Any
* Optional items can be filled in as much as possible.
View detail
It is cheap and a good Holder
Everything that comes from any Manufacturer has hardly changed
I bought the one with the cheapest KN project
Usability can be used together with Pulley face
Of course it can also be used on the Driven side
Because bar sticks are both tightened at the edge and Nut is removed, the part of the bar can be removed
It can be done as needed
Adjustment of the ring part can also be adjusted to 3 stages Can be changed by the butterfly Screw part of the horizontal board
View detail