• Home
  • Product reviews
  • Search reviews
  • Tools
  • Polishing Tools
steps-review.png
Filter
icon-webike.png
Write a review and get Webike Points!

Reviews
Polishing Tools Clear all
Waterproof Sandpaper Set [#1000]
DAYTONA
Waterproof Sandpaper Set [#1000]
Japanese Webike user
4/5

Use up Size!

I used it for Repair work on a standing rollover scratch. I like that it is water resistant so I can polish with water! I was able to work without feeling Stress because the shavings are hard to clog! View detail

Shine Polish Wiping Buff
PROSTAFF
Shine Polish Wiping Buff
Japanese Webike user
4/5

For polishing

I purchased this for Aluminum parts. View detail

Water-Resistant Sandpaper Set[#180, 320, 600]
DAYTONA
Water-Resistant Sandpaper Set[#180, 320, 600]
Japanese Webike user
4/5

Necessary and sufficient impression

Used to remove rust from front forks and for surface preparation prior to painting.
After using this product to remove Large rough rust and dirt, we used 800, 1000, 1500, and 2000 Sandpaper (sold separately).

DAYTONABrand is a very ordinary sandpaper in terms of polishing speed and finish.
Quantity:Size per 1pc. is Smaller (About a quarter of the size often seen in Home center) But there are two of each, so they can be used in a certain way.
Although Home center products are cheaper and can be purchased in large quantities, as a Sunday mechanic, I can't have that many, so this amount is easier to use.
I will continue to use it in Restoreetc. View detail

File Set (5pcs/set)
KTC
File Set (5pcs/set)
Japanese Webike user
jp
4/5

Various sizes and shapes are available.

I think it was an OEM of Tsubosun. This kind of bar file is useless if you don't have all the shapes in one place and hold them.
It can be used for a variety of things, such as chamfering edges, getting used to BALI and chips, enlarging hole diameters, cutting grooves, etc. I think it's worth buying for now. View detail

Water-Resistant Sandpaper Set[#180, 320, 600]
DAYTONA
Water-Resistant Sandpaper Set[#180, 320, 600]
Japanese Webike user
jp
4/5

Ordinary water-resistant Sandpaper

I used this product to remove rust from the GoldParts and to prepare the surface before painting.
After using this product to remove Large rough rust and dirt, I used Sandpaper of 800, 1200 and 1500 which are sold separately.
As I wrote the impression there, I used it only for water polishing, but the speed of polishing and the finish are very ordinary Sandpaper.
There were some intricate areas, so I used a Brass Brush and other abrasives as well.

The difference between the separately sold 800, 1200 and 1500 Sandpapers is that each Sandpaper contains two of each.
Quantity:Size per 1pc. is Smaller (About a quarter of the Size often seen in Home center?) But there are two of each, so they can be used in a certain way.
220 yen per piece, so Quantity:If you think that it is less than 40 yen per 1pc., well, there is not that much Large difference when you think about the size and price sold in Home center.
It is recommended for people who have trouble going out of their way to buy it or to buy it to get free shipping. It's not something you need to have. View detail

Waterproof Sandpaper Set [#800/1200/1500]
DAYTONA
Waterproof Sandpaper Set [#800/1200/1500]
Japanese Webike user
jp
4/5

Size per piece is Small.

I bought this product to remove rust from my GoldParts and to prep them before painting.
The third hand is Quantity:It's a Set, so thankfully you don't have to go out of your way to buy each one.
I used Sandpaper, the one with 180, 320, and 600 in it, for the areas with rust and then used it for finishing.
from the top [Color] I plan to paint it with Clear, but I was able to get it to look the way I wanted.
I used it for water sharpening, but the finish etc. are very ordinary Sandpaper.

There seems to be a pad for polishing, but I happened to buy Sponge and sandpaper at 100yen shop.:The one that became Set? It was good to use it on the
I appreciate that there are three types in one, but Quantity:The size per 1pc. is small, so if you use it for a large area such as a cowl, you will need many sheets.
I think that it is good to buy Sandpaper in Home center etc. if you use it a lot, but I thought that it was not a bad product if I thought about the use in a small area and the trouble to go out to buy it. View detail

Waterproof Sandpaper Set [#800/1200/1500]
DAYTONA
Waterproof Sandpaper Set [#800/1200/1500]
Japanese Webike user
jp
4/5

It comes in three different types for convenience.

I used it to polish my front fork which is now white and I think it's a good value for money compared to buying at RoseRose. Quantity 2 of each:Large size is also easy to use, but if I wanted to be selfish, I would say that 2000 is also a Quantity:I wanted it to be a set. View detail

Waterproof Sandpaper Set [#2000]
DAYTONA
Waterproof Sandpaper Set [#2000]
Japanese Webike user
jp
4/5

As a finishing touch to the polish

I bought it as a finishing touch after polishing with other water resistant Sandpaper
Unlike the others, this one is only number 2,000, but I don't think the finishes will be so overworked, so I'll just use this one I think it's enough
Specifications are not yet available, so I do not know, but if it is good to use one way or another I will buy it when I polish in the future View detail

Water-Resistant Sandpaper Set [#320, 600, 1000]
DAYTONA
Water-Resistant Sandpaper Set [#320, 600, 1000]
Japanese Webike user
jp
4/5

It's not expensive, so you could buy more than one

I bought it as a Rust remover for Frame and others
As far as things go, I think it's perfect I haven't been able to use it yet, but WW
If you want to do a Large surface, you can do it by recommending it to your friends It is not
Probably not enough View detail

Waterproof Sandpaper Set [#800/1200/1500]
DAYTONA
Waterproof Sandpaper Set [#800/1200/1500]
Japanese Webike user
jp
4/5

As a final polish up

I bought it for the final polish of the Engine area
I haven't been able to use it yet, but from what I've touched and seen, it seems to work fine as a thing
There was a higher count than this one, but I bought it as a trial run anyway, so I used it If I need a higher one, I'll buy it separately
It's not too expensive, so it's just right for me to try it out View detail

Water-Resistant Sandpaper Set[#180, 320, 600]
DAYTONA
Water-Resistant Sandpaper Set[#180, 320, 600]
Japan User(translated)
jp
4/5

Ordinary Water-resistance Paper

I bought it to match shipping costs
Just because it's DAYTONABrand doesn't mean it's nothing but water- resistance Paper
If you use it a lot, it's certainly cheaper to buy it at Home Center
However, if you prefer to have three of them in your hand, even if they are small, this may be a good choice View detail

Hobby Work File
SK11
Hobby Work File
Japan User(translated)
jp
4/5

sufficient for one's needs

Affordable and inexpensive Quantity for the product:I think that it is a Set product It is described so that life is shortened in the opposite direction, but because it is File, I use it in both directions Hey Quantity at this price even if the durability is poor:Set would make sense View detail

Waterproof Sandpaper Set [#800/1200/1500]
DAYTONA
Waterproof Sandpaper Set [#800/1200/1500]
Japan User(translated)
jp
4/5

It is good to have 3 types.

Because Cowl has broken, filled with Poly Pate that I bought at Home center, she made a face with this product.
Because it is Sandpaper Quantity : 1pc. Although it is cheap to buy it, if it is a situation where fewer sheets are needed, Quantity : 1pc. It is saved because three kinds are included (And water resistant!). View detail

File Paper #240
PROXXON
File Paper #240
Japan User(translated)
jp
4/5

Is it fit for fine work? Since it was cut from beginning, it was easy-to-use.

Is it fit for fine work? Since it was cut from
beginning, it was easy-to-use. View detail

Set Rasp
KTC
Set Rasp
Japan User(translated)
jp
4/5

It purchased in order to process the screw fixation hole of a 250TR external F fender. Since it was an external F fender made from FRP, a power tool etc. were not able to be used but were able to be easily processed only with this file. It is a fi

It purchased in order to process the screw fixation hole of a 250TR external F fender.
Since it was an external F fender made from FRP, a power tool etc. were not able to be used but were able to be easily processed only with this file.
It is a file of a size (W:5.5 mm) exactly good for work which extends a hole 6 mm in diameter. View detail