Reviews
One for the toolbox
I used to use a valve cap that I thought was made by for Motorcycle. I used to use one that seemed to be from for Motorcycle, but I lost it because it was small like the Valve cap, so I bought the Valve Core Spinning from DAYTONA. I lost it and bought Valve Core Spinning by DAYTONA this time. It is also very easy to turn because it is just the right size. View detail
One for the toolbox
I purchased the shared tools that were in Garage because they were missing.
When I think of turning an insect, I think of Large.
There is also a long Type like Driver, but it often hits the hub and cannot be turned except for the L-shaped Valve.
I think this is the best standard one for some reason.
If I had to say something, I would say that it is still easy to lose.
It might be more useful if something like Hook or Strap could be attached to it, since it can be lying around unnoticed.
View detail
Very easy to use
It is very easy to use because of the thicker gripping area and Knurl.
This tool is indispensable for airing out Tubeless tires firmly when changing tires.
Off-road tires are often tube tires, so it is useful to have one in your tool box.
I recommend it because the price is not so expensive.
View detail
It is easy to handle for changing tires on off-road motorcycles, etc.
This product is inexpensive, but is useful for turning valves when changing tires on off-road motorcycles, etc. The surface is giza-giza, so the grips work well and are easy to turn! View detail
Pretty easy to use!
As the title says, it is useful for Tire replacement.
First, it is easy to turn.
The handle is cylindrical, so it's easy to turn round and round, and the Knurl finish makes it less slippery, even with the Mechanic Gloves on or with military gloves.
And, because it is small, it is easy to handle.
Until now, I used the Valve Spinner on the Driver, but depending on the motorcycle, it would not turn because it interfered with the Wheel's Spoke, or even if it did turn, it would be difficult to remove the Valve because of the Clearance, which was a little inconvenient.
This valve turner is so small that it can be turned without interfering with the Wheel or Spoke, so you can proceed with your work without stress.
There is nothing in particular to pay attention to, but if I had to say, I would say tool management.
Because it is small, it is easy to lose, so I think it is good luck to decide a place and manage it properly.
View detail
One resident in the toolbox is Recommendation!
This is a handy item to have in your toolbox. The handy size Valve Core Spinning takes up very little space.
I chose this one because it's of the Gold genus and it looks hard to slide when you apply force to it, so I chose Cost Because the performance was high.
It's easy to use, so it's Recommendation.
View detail
Easy to use
The front wheels are of STD type and the rear wheels are of lateral type with Air Valve, but both You can turn the Core with no problem The handle has a non-slip surface that makes it easy to use and easy to apply pressure View detail
This is good
I have been using the Cap type that was given to me for a long time, but I lost it! I had no choice but to use the for VehicleDriver type, but it was too long It was difficult to work with
Then I found this tool I did
First of all, the size and Grip's Large size, which is specially designed for MotorcycleWheel, are also available in Just right, the Knurl process prevents slippage and conveys a tightening torque-like feeling to your fingertips So it's easy to use
It is very easy to work with because it is not too light and has a perfect weight, and it is easy to remove without difficulty It's a good idea to keep one in the toolbox for on-board use, since it's a tool you can't afford not to have
View detail
It is easy to use product.
I used it to remove the military Tire's bug.
It can be removed without hitting Rim.
I think that it is a good product.
Because the price is also cheap, I thought it was easy to purchase.
View detail
Compact and easy to use.
The old one is of a wind body like StubbyDriver of resin Handlebar,
I kept using it. It was a bit large but it was easy to use.
I purchased the current item as I lost it when I moved.
Current products become Gold genus very much Compact.
I think that it was just fine Large.
There is no problem turning at all..
If you put it down to the Wheel by mistake, it will be scratched, so it is caution to handle it.
I think that there is nothing to rarely drop as you enter Pitch and grab Core, but just in case.
And the price has fallen. The old one was about 800 yen at the time of purchase, but the current item is
Base price is close to half price.
Valve cap with Core Timing can substitute, but this dedicated Core turn is definitely better
There is no Stress. Since it can be fastened tightly, fine air escape and Throw
You can also prevent Puncture.
Once it is used it will not be able to return. it's recommended.
View detail
Exquisite Size feeling!
Length, thickness and weight were exquisite, I thought that it was a product developed and developed by the person actually using it.
Knurl finish has been tightly fixed, Points that are hard to slip are also high.
Considering the function and finishing, I think the price is reasonable.
I think it is a gem that has one loss and no loss!
View detail
Since of the exhaust air filling can be carried out to a Direct when sticking the Bead of a Wheel and a Tire by exhaust air filling by the Compressor after constructing exhaust air omission and the Tire of on a Wheel at the time of tire
Since
of the exhaust air filling can be carried out to a Direct when sticking the Bead of a Wheel and a Tire
by exhaust air filling by the
Compressor after constructing exhaust air omission and the Tire of
on a Wheel at the time of tire replacement, since Mus of the center of a photograph can be removed easily, it is convenient.Moreover, since the insertion tool of the Recoil
Broke, it uses instead.
View detail
Since it was reasonable, it purchases. It is touch with sufficient appearance. -- a part short also at a narrow place -- it is easy to turn.
Since it was reasonable, it purchases.
It is touch with sufficient appearance.
-- a part short also at a narrow place -- it is easy to turn.
View detail
Although it was small, it was easy-to-use. skid processing is also carried out, and it is cheap, and recommended. Although it worried with Valve-cap Type, I think that it was good here.
Although it was small, it was easy-to-use.
skid processing is also carried out, and it is cheap, and recommended.
Although it worried with
Valve-cap Type, I think that it was good here.
View detail