Reviews
For CRF250L front axle
Purchased to loosen the front axle of CRF250L.
Although 14mm Hex is not a tool that is used very often, I purchased a solid tool because Off cars often have a lot of suspension modifications and there are opportunities to remove/attach Wheels.
The insert is 1/2, so you need to be careful only there, but it is a stable SIGNET and satisfactory tool.
View detail
durable tool
I bought this SK11 25mm screwdriver bit set from webike. The set contains 10 tools. The tools are very detailed and durable. The surface has a micro-coating but is very thin, so the screw accuracy is very high, and it is not easy to screw the screw. A storage seat is attached for easy storage after use. -------------------------------------------------- -------- I bought this SK11 25mm upper set at Webike. The suit contains 10 tools. The tools are very detailed and durable. The surface has a micro -coating but thin, so the screw accuracy is very high. It is not easy Comes with storage seats for easy use. Powered by Google Translator View detail
That would be handy
This is the third place for Plus, and is also used for the Screw that holds the Crank Case Cover of APRIO, the Tapping that holds the Case of Cooling fan, and the Cover under Seat.
I use it in the Socket converted to Ratchet or wear it as it is when Impact Driver is available.
The Large Almighty's number is about the second largest, but I bought it this time because I was afraid that it might lick my head.
View detail
The best of the mug catcher bits
The 'mug catcher' part of this set means thats there is a magnetic sliding outer part that will slide up the screwdriver bit and hold a screw in place. This is very useful for working on screws where you cannot reach told put in or hold the screw in place. The 'mug catcher' is removable and will fit these and other driver bits. This set is my favourite of the Vessel range as the mug catcher is smaller compared to some other sets so fits in smaller spaces. View detail
Another fine product from Vessel
The + bits in this kit are great for anyone using a bit ratchet on a Japanese motorbike as they fit the screws properly and allow you to use tools bought elsewhere for that job without rounding the bolt heads. The other bits work fine but I bought this set for the + bits. View detail
Convenient
It can be used to turn screws, etc., that cannot be turned with a regular Phillips screwdriver by using the back hand.
It is useful and convenient to have one.
View detail
Convenient to have
This is ko-ken's Bit holder.
9.You can use Bit in 5sq.
This is useful when you want to use Torque or Plus/Minus, which are not often used in Socket, in Ratchet or Tren.
For a change, a long bit of HEX can be used as an ultra-long HEXSocket.
The "BIT" is a very useful tool for those who have a certain amount of BIT, although there are few things you can do without it.
Bit holder is Large
Magnet Retention
Spring Retention
This product is Spring retention.
There are some bit holders that are not so easy to use, for example, the bit insertion part is too loose, the bit retention is too loose and the bit is pulled out, or on the contrary, the bit is stuck on the bit and the bit is not pulled out after work. It is just barely strong enough to pull out a bit with a bare hand.
Quality in this area is as expected of ko-ken.
It is highly recommended as a Plusα for people who have some tools.
View detail
Thank God it was there.
[How is it used?
I bought this to use when rosing the front fork of my TZr50R.
In order to remove the Inner Tube from the Bottom case, it is necessary to remove the Bolt of the bottom, but if you do not do it well with an ordinary Hexagonal Wrench, the inner part also rotates and cannot be removed.
One Side was removed well, but One Side was not removed, and I used it by connecting Impact Driver, this product, and Hexagon socket.
How was your experience with it?
I was able to get Bolt successfully, thanks in part to this product.
The time of use is really about 1 minute, but it was saved because the work had stopped here.
However, it is a little hard to remove it from the Socket because of the accuracy of the ball of the joint part.
Well, I was happy with the price and the fact that it is a tool that I don't even know how many times I will use it.
How did it compare to other products?
Originally, I bought a Hexagonal Wrench for Impact Driver and tried to use it, but it was not long enough to be exquisite and became useless.
The distance to the Bolt on the Front fork of the TZr50R is surprisingly deep, so you may need to be careful.
【Review】
It's a pretty limited tool, but it's been a huge help to me personally.
The accuracy is not as good as the famous tool manufacturer, but it is good enough for Sunday mechanic.
View detail
Just fit
I bought this for my Carburetor Pilot Jet.
It was Just fit on a Mikuni BS34 Pilot Jet.
The tip of the blade is Straight to some extent, so it can reach the bottom of the Jet.
There is a slight rattle when turning, but I don't think the Jet will chip or anything.
It would be perfect if the thickness of the cutting edge was another 0.1?
The width is Exactly.
View detail
Expected
The hardness, the bite, it's great.
I have a preference, but I'm the first of this kind of Bit.
Some people may think it's too hard and will damage the Bolt, but I use it with the softer Snap on depending on the application.
View detail
This is my favorite tool.
This tool can be used for both Bit and 1/4 socket. I mainly use it as a tool to carry when touring in the forest. View detail
It's marked for electric power!
It can be used as an extension of the Bit although it is for electric power.
Originally, it should be aligned with Driver, but it's aligned with Bit and the length is not enough. I recommend it when.
However, it's a bit wobbly because it's spliced in.
View detail
Good accuracy
It is Firmly in the shape of a star with precision.
Because the appearance is also Colorful, and it is hard to rust, I think that the cost performance is better than buying a bad Bit. It is.
However, the first purchase Cost is high
Also, it's not compatible with the Bolt for theft response because Ana is not available.
View detail
Grip and Quantity:Set
Replacement Swiss Grip Screwdriver Handle and Quantity:I bought it as a set
I had to use a bit, so this will be a driver
Bit is cheaper than buying a bunch of Blade's
View detail
Good accuracy
That's a PB
It fits tightly into the hexagon with precision
It looks COLORFUL and rust-resistant, so it's better than cheaper wrenches
I think the costumes are good
However, the first purchase Cost is high
View detail
![Super-short Bit With Grooved (for Manual Driver) [HEX 3 X 19]](https://img.webike-cdn.net/catalogue/13962/4962485397029_1_TS.jpg)
Bit holder
Bit holder with several Hex bits, CompactRatchet and Others, carry the smallest tools necessary
It's useful in times of need
View detail
![Super-short Bit With Grooved (for Manual Driver) [HEX 4 X 19]](https://img.webike-cdn.net/catalogue/13962/4962485397036_1_TS.jpg)
Bit sockets and
If you have one bit socket, it is very convenient to have all the necessary sizes of HexBit
The HexBolt can be opened and closed freely with the Ratchet wrench
View detail
![Super-short Bit With Grooved (for Manual Driver) [HEX 2.5 X 19]](https://img.webike-cdn.net/catalogue/13962/4962485397012_1_TS.jpg)
As an in-vehicle tool
Carry the Bit socket and Ratchet as a vehicle tool
Align the necessary bits and put them in the bit holder
It's especially useful when you change the OEMBolt to a torque-with-hole, etc
View detail
JIS type Bits
These are good quality bits if you are looking for JIS type bits. These fit in Japanese type screws much better than normal philips screwdrivers. The JIS type doesn't "cam" out like philips screwdrivers do. Because they are bits it means that you can put them in a socket driver or torque wrench so you can apply correct torque or remove stubborn screws that normally wont budge with a normal screwdriver. See the difference in bit sizes between #2 and #3. The #3 is really quite big and the #2 is quite small. There is a bigger difference than say in a set of Hozan JIS type screwdrivers so this will be a good addition to your toolkit (the #3 is bigger than a Hozan #3). View detail
Domestic products
I used it to remove Helmet holder. Although KTC is often used, it is precious as there are only fluffy domestic products. It was good as it was a part I do not want to punch around. View detail