Reviews
It is inexpensive but also very practical!
[How is it used?
I bought this to remove the fork top bolt on my CB1100.
Was the one you received as per Image?
I was surprised to see that it was LARGER than expected.
How was your experience with it?
It works fine as a Glasses Wrench, it looks expensive because of the DAYTONA stamp, but I am satisfied with it because it is cheaper than similar tools from Home center.
[Included Parts:were they on?
Nothing else is included.
[Was there anything that disappointed you?
None in particular. Good quality, practical and good looking.
▼It is definitely better than the cheaper Home center tools. I don't know about durability yet, but I want to use it for a long time.
View detail
Very Strong Offset Wrenches
I have used these wrenches several times in the past few weeks. They are lighter than I expected, but very strong and comfortable in the hand. I have been very pleased with these tools and will continue to buy more tools from KTC through Webike. DHL delivered this order to the east coast of the USA in about 36 hours! View detail
Cheaper than Fat Nan
It's almost meaningless to be cryptic. w
I bought this for my Drain bolt and I like the angle.
It is very easy to use and has great cost performance!
I regret that I should have had all my other Sizes here!
View detail
Ideal for CUB without Drain bolt
Ideal for CUB without Drain bolt
Reasonably short and angled at the neck so it's easy to work with.
View detail
This is a good length to use for this.
ShortGlasses from KTC, the Japanese Standard for tools.
StandardLine, which is easier to apply Torque, is more convenient for ordinary use, but the short length of this product is useful in intricate areas.
I bought it to bleed air out of my RearBrake Caliper.
It was very difficult to open and tighten the Bleeder Bolt due to interference with the Wheel when it was long, but with this Short Type, it can be done without any obstruction.
Quality is KTC, for better or worse.
Accuracy and rigidity are neither noteworthy nor lacking, and the price is not particularly high but not cheap either.
It is the perfect positioning that you can pick up without thinking when you are tired of comparing and contrasting various brands, but you don't want to go for cheap ones either.
I can usually recommend it because you receive exactly what you expect, which is not above or below your expectations.
View detail
Made by DAYTONA, it is reliable and highly accurate.
This product is a Glasses Wrench made by DAYTONA and is highly accurate. It feels comfortable in my hand when I hold it, so I found it easy to apply force. View detail
I knew it was KTC!
KTC is still the place to go for Motorcycle and car maintenance.
I have no complaints about the appearance, sturdiness, and ease of application of power.
Very easy to use
Quantity:I have several of them because I bought them at Set.
View detail
Effective in tight spaces
This Wrench was useful for use in tight places where Stroke could not be taken.
Even with the Bolt in the back, Torque is easy to use because it can be hung securely.
Offsetting is good and accuracy is not bad.
View detail
Gun meta is cool.
I like the Gun meta because it is very cool. 10mm is the only thing I lost, so I use Tone's Glasses Wrench instead. Unlike many other products that only look good, this Glasses Wrench was able to loosen the sticking nut.:I use this for every maintenance of my motorcycle and I have never had a problem with the nut getting licked. I have never had a problem with it. I think it is the best Glasses Wrench in terms of cost performance. View detail
Great Japanese quality at a reasonable price.
I have been trying to find suppliers of Japanese tools that ship to the USA at decent prices and Webike serves me very well. KTC makes great made in Japan tools at reasonable cost and I could not find this same style from any other manufacture. The fitment to fasteners is great and I was very happy to purchase them. View detail
Fantastic 45-Degree offset wrench set.
This is a great wrench set that includes all the sizes you will run across on you Japanese motorcycle. As always Kowa fitment to the fastener is spot on and there is not slop at all. This set is small enough that it could probably be carried on the motorcycle itself since most new bikes don't include a a toolkit any longer. My 10-12mm combo has Honda engraved instead of Kowa but I can live with that. View detail
Absolutely effective for brake pipes
It is very useful to remove the brake pipe from Master Cylinder and ABSModule. I recommend you to use before licking it because it is very difficult to replace the brake pipe. View detail
Tentatively KTC, but KTC
In the past, KTC had a price compared with luxury tools
From the time Nepros was born, Level came up..
You can buy anywhere, the price is also Reasonable, quality is fine.
It is KTC for amateurs to get it for now
It will not be foolish..
View detail
Effective in narrow areas
In my Motorcycle's Bolt there are many 10 millimeters to become One Side Spanner, but it is a good texture, I mainly use Clutch, Brake lever for desorption in Motorcycle maintenance. In ordinary Glasses in this narrow place, it takes time to rotate only at a small angle but here is no turnover and because it is a head swing, so even if there are more obstacles, you can turn it and you can also fasten it
So you can keep it in Smooth and you can put it in Back during Touring with palm Size again. Please do
View detail
Large changeable satisfaction, perfect.
(1) There is some backlash when fitting into Nut, but it does not hurt Nut. When using cheap tools, Nut's horn was hurt by a single shot, but Nepros has no trace.
(2) Although the width of the handle part is wider than the other Manufacturer's Double-end Wrench, the wider one is easy to hold oneself.
(3) Of course it does not happen that Plating is peeling off.
(4) There are few counterbores, but there is nothing wrong with fitting into Nut. It is safe to increase the contact area with Nut.
(5) Exterior, Plating is very beautiful. As expected, it fulfills the feeling of ownership as Nepros. I think that it will be an organism.
(6) If raising a fault, is it about the price.
View detail
Trusted
I purchased it because it was necessary for maintenance of Motorcycle.
At first I was planning to buy a cheap tool of Hundred Honor, so I did not want to lick Bolt's head so I bought a first-class KTC.
Body is matte finish treatment, but I think that it is better to have a satin finish than a plating where the wound stands out. It is hard to slip.
Although it is a feeling of use, there is no worry that Hold and lick a solid Bolt. I did a very good shopping..
View detail
Oilfor Replacement
I bought 14-17 to exchange the Oil of AF 67 Today.
Especially with this there are no features, convenience is good, cheap and secure KTC.
View detail
Since it was convenient for little maintenance when put on the Garage, a slightly comparatively cheap glasses Wrench was bought, but meat is too thick to use depending on a place. He thinks that it is KTC too and rebuys it. Die length of meat is
Since it was convenient for little maintenance when put on the Garage, a slightly comparatively cheap glasses Wrench was bought, but meat is too thick to use depending on a place.
He thinks that it is KTC too and rebuys it.
Die length of meat is not too thick enough, either, it goes also into a narrow place, and meat omission of the portion of a handle is carried out, and it is lightweight, and the portion equivalent to a hand has area perfectly, and tends to put in power.
After all, KTC was reconfirmed when user-friendliness was good.
Simple and sturdy [ since it is not a Mirror Tool, there is no high grade feeling, but ].
This may be sufficient as KTC.
Although the person felt more highly is probably also in the tool of
KTC, if you buy it at any rate, we will recommend you KTC which can fix firmly.
Especially Webike has a tool of KTC cheaper than the another place.
When not reaching mailing cost no charge, we recommend you to add to holdings one KTC which he wanted.
View detail
It was attached by the bolt head of thinness with an Earth Bolt of the Cell of a DJEBEL250 surprising in a surprising position, and if he simply had this [ no ], it was not able to remove. Since each Long straight was high, an order for this comparat
It was attached by the bolt head of thinness with an Earth Bolt of the Cell of a DJEBEL250 surprising in a surprising position, and if he simply had this [ no ], it was not able to remove.
Since each
Long straight was high, an order for this comparatively reasonable was placed.
Saved ~
View detail
[Webike Monitor] Since he wanted the Glasses wrench of No. 7 to adjustment of the CARBURETOR, it purchased to it. By just right die length, it is easy-to-use and finds it useful. I think that it can use also as an in-vehicle tool sin
[Webike Monitor] Since he wanted the Glasses wrench of No. 7 to adjustment of the
CARBURETOR, it purchased to it.
By just right die length, it is easy-to-use and finds it useful.
I think that it can use also as an in-vehicle tool since it is short.
By
4 Set, since it is this price, I think that it is profitable.
View detail