Reviews
It is a self-sufficient tool.
These tools are from KOWA, which was the distributor of Honda OEM accessory tools.
(Current OEM accessory tools are not JAPAN)
It is a 6P and 12P Glasses Wrench.
It says HONDA on it, so if you like Honda, you can buy it.
There are plenty of other tools that are cheaper and better.
There is no need to dare to buy this.
It is for Tool Mania.
View detail
A good tool that is sufficient and long-lasting
[How is it used?
I bought a DID Chain Cut & Crimp tool to replace the chain on my XJR400R, but I didn't have a 19mm or 27mm wrench, so I bought this one.
This product is a Both SidesGlasses Wrench, and I purchased it thinking that I could use the 22mm and 24mm that I did not use this time in the future.
Was the one you received as per Image?
Size:24×27mm, Size:19×22mmQuantity:I purchased 2pc and it was longer than I expected.
As a Sunday mechanic myself, I am satisfied with it because it is a one-of-a-kind product.
How was your experience with it?
I think it is very accurate and easy to use.
If I had to say something, I would say it is heavy, but that is about it.
How did it compare to other products?
There are others, such as the high-end tool Manufacturer, but I think this one is just right for Sunday mechanic in terms of price.
View detail
Easy to use
Very useful when removing the Brake pipe from the ABSModule!
It is a hard and tight area from the safety point of view, so if you lick it with Spanner, it will be Large strange.
I think it is an essential tool for maintenance around Brake.
View detail
It's very useful sometimes.
Quantity in most sizes:Pair (for Left and Right) The difference between the two is 1mm, so it's harder to buy.
If you have it, sometimes situations arise where it is very easy to use.
In fact, it would be best if the combination of 12m and 14mm is used, but since 13mm is often used in foreign cars and mobile phone holders made overseas, I think this size combination is not so useless.
View detail
It's expensive, but it's something I'll use forever.
There are many manufacturers of glasses wrenches in the high-end price range.
In the end, I decided to go with the Point without the zagri and bought the Glasses Wrench from Nepros.
In terms of texture, I like the pearl texture, and because the edges are a little pointier, other manufacturers are easier on the hands when you apply pressure.
Since I often handle old cars and have a high probability of licking the screw, I wanted to reduce the probability of licking without the zagri as much as possible.
View detail
Effective in tight spaces.
It can be used to work in tight places where the angle of the Long does not work or where the Glasses Wrench does not fit. I was able to replace the Neutral switch in the back of the car with ease, and even with the Short you can still get the Torque you need. View detail
Ratchet is useful
The quality of the Ratchet is very good and the Ratchet works very efficiently in tight places and deep places where the angle does not work. It is very easy to use as you can apply a certain amount of torque when tightening without spinning when loosening. View detail
(after negative base of verb) have to do
Caliper and Axle ShaftBolt etc., although the frequency of use is small.
That's the tool you need in a hard and tight place.
The accuracy is good and it doesn't look like Bolt is going to lick it.
View detail
It's quite useful.
Because the angle of the Ratchet and the neck can be changed, you can turn the Bolt of the narrow place efficiently. View detail
Easy to use
It is very easy to use and the quality is also good though I used Combination of 10mm and 12mm of the size used most. The angle of the swing of the head and the GEAR are fine, and the effect is effective even in the narrow place where there is no angle. View detail
Effective in tight spaces.
It is very easy to loosen the bolts at the longest and narrowest point. You can use it for a long time to loosen the bolts. View detail
I wanted a 17 mm Meter to fit in oil filterfor Replacementtool
CBR600RR (2010 year) When replacing the oil filter, I put a filterfor replacement tool in a cup and turned it with a 17 mm Meter Box, the Box caught in a lump and it did not close tightly.
I thought that it was oil, but even if I challenge again wipe out the result will not change, interrupted work today and interrupted immediately.
With this tool it does not slip and it is easy to work because it is also perfectly fit.
【What made you decide the purchase?】 A sense of security Brand
【How was it actually used?】 The full length is long
【Was it difficult to install? (Hard parts case)】 None
【Please tell me the point of installation and hang (in the case of Hard parts)】 Depending on the location, I can not take the turning Stroke, but I think that a long component of power will enter and it will be nice.
[Is there anything I was disappointed about?] Length (30 Centimeter as much)
【Hope for Manufacturer - Please tell me if there are any improvement points】 5 Centimeter I want you to shorten it
【Have you compared items?】 Home center
[Others] If you are lost, try buying it
View detail
I licked oil drain bolt ...
Oil for exchanging, if I thought about removing drain bolt, I licked crane and stopped working on that day ...
I was using the thing I bought at a certain corner, but I will use it commonly because it does not come off imaichi, I bought 1719 Double-end Wrench at the same time.
I've been using it for a while because I have not been crawling at the moment.
However, since Length is about 20 cm, it may be unusable depending on the location.
【What made you decide the purchase?】 Reliable with famous Brand
【How was it actually used?】 I feel more secure than I thought
【Was it difficult to install? (Hard parts case)】 None
【Please tell me the point of installation and hang (in the case of Hard parts)】 None
[Is there anything I was disappointed about?] Depending on the location, it does not enter. (It is good for putting in force, but ...)
【Hope for Manufacturer - Please let me know if there are any improvement points】 I want you to lower the price
【Have you compared items?】 Home center
[Others] If you are troubled you should buy! ?
View detail
Since it is a tool which can remove a Nut by light power and it uses for the satisfactory fixed target since purchase accuracy is high because of Sprocket exchange, naturally safe KTC is chosen.
Since it is a tool which can remove a Nut by light power and it uses for the satisfactory fixed
target since purchase
accuracy is high because of Sprocket exchange, naturally safe KTC is chosen.
View detail
Although there is also an expensive thing by a major brand in an imitation, I think that this is enough for the Sunday mechanic.
Although there is also an expensive thing by a major brand in an imitation, I think that this is enough for the
Sunday mechanic.
View detail
[Webike Monitor] Since he wanted the tool when fixing the Motorcycle, it purchased. It is KTC truly. It is dramatically easy-to-use. Also as for the Case, it is glad that it is a Set.
[Webike Monitor] Since he wanted the tool when fixing the
Motorcycle, it purchased.
It is KTC truly.
It is dramatically easy-to-use.
Also as for the
Case, it is glad that it is a Set.
View detail
[Webike Monitor] Although it was KTC, made in China was specified in the Package. Or [ what the quality check of details feels for that it is sweet is fancy ] ... Although I think that there is individual specificity, even if it does not
[Webike Monitor] Although it was
KTC, made in China was specified in the Package.
Or [ what the quality check of
details feels for that it is sweet is fancy ] ...
Although I think that there is
individual specificity, even if it does not go to a Nepros, I would like you to make a Beauty to a slight degree.
I think that
quality is satisfactory.
Although properly used according to BZ14-B3 and the use which were purchased independently, there is only KTC and there is only what can also bear
book bundle.
It may be better for using it for this bundle repeatedly to have avoided, and to use in combination with a Glasses wrench
etc. however, since a merchandise sum is more expensive.
View detail
At the time of the work of a Bolt with a stay ring, a big Shaft of a Wheel, etc., or a Nut, it is certainly used. The main part is carrying out the textured and it is hard to slide. It is OK, even if it sets to a Bolt or a Nut and rides on a Wrench on f
At the time of the work of a Bolt with a stay ring, a big Shaft of a Wheel, etc., or a Nut, it is certainly used. The main part is carrying out the textured and it is hard to slide. It is OK, even if it sets to a Bolt or a Nut and rides on a Wrench on foot from on the. (I weigh 60 kg.) View detail
All the Sizes of 6 to 27 mm are owned. Although the thing purchased first is used for 30 years or more, it does not have a Rust, either and is the same as a new article. Although it does not understand probably because of the angle of 45 degrees, since a
All the Sizes of 6 to 27 mm are owned. Although the thing purchased first is used for 30 years or more, it does not have a Rust, either and is the same as a new article. Although it does not understand probably because of the angle of 45 degrees, since a Torque is imposed in comfort and it is easy to do work [ in a narrow place ], it is my Standard Tool. View detail
It purchased in order to remove a [Webike-monitor] 250TR external F fender. Although removed until now using KTC combination wrench:MS2-08 (under a picture), the wrench had interfered in the tire frequently during work. KTC short closed wrench: M5
It purchased in order to remove a [Webike-monitor] 250TR external F fender.
Although removed until now using KTC combination wrench:MS2-08 (under a picture), the wrench had interfered in the tire frequently during work.
KTC short closed wrench: M5S-0810 (on a picture) had the short overall length 17 mm compared with combination, and its workability improved.
View detail