Reviews
TMX30 for Wire adjustment…
I bought this to adjust the tuning of the Accelerator Wire on my TMX30.
Stahlwille's Spanner angle was easy to turn.
In case you need 8mm and 10mm.
View detail
Lightweight CombinationWrench!
Stahlwille's CombinationWrench is lightweight and easy to handle.
Glasses are also thin and can fit in tight spaces.
Spanner is also thick, so it never opens and is firm.
I recommend it!
View detail
Combination wrench for professionals
Ask any tool swamp dweller what”combination wrench they”d like to see, and the Stahlwille 14Series comes to mind. The Stahlwille 14Series is the one that comes to mind when you ask the residents of Tool Swamp what they think of”Combination wrench.
In terms of appearance, it is a higher-priced product with a pear finish, as opposed to Snap on and Nepros, which are higher-priced products with a mirror finish.
(As expected, it is cheaper than Snap on and Nepros.)
You will not see this in Home center or other places.
It is not as well-known as Snap on or Nepros, and its pear-shaped surface is not as glamorous.
However, it is a product that shines with its individuality backed up by its functionality, such as the feel of elasticity caused by the difference in materials, the difference in Spanner shape caused by the difference in design concept, and the Offset Glasses, which is rare for Combination wrench.
This is a good thing, because it gives a sense of being a professional.
(In fact, I hear it's accepted by Gen.)
Personally, in considering a replacement from KTC's StandardLine, I came to this product because I dislike the mirror finish.
I actually bought it and used it, and my impression is that it is
The bending feeling is definitely unique and uncomfortable until you get used to it.
Spanner is thicker, so you'll want a separate Thin Open Wrench.
Glasses are slightly different from ordinary combination wrench due to the combination of offset, neck angle, and thickness.
So, to be honest, it took some getting used to & it seemed to be a matter of taste.
I will use it as is for a while and if I like it, good, if not, I will sell it and replace it.
(High-end tools should be able to do this)
View detail
Like Caliper's Breather Valve.
I do have a glasses wrench, though.
The CombinationWrench is easy to use for Caliper air bleeding, etc. due to its handling and angle.
In addition, because the size is so small, there are many times when the 8mm bolt is needed in a secluded place, so I think it is more convenient to have a separate 8mm bolt.
View detail
easy to grasp
The width of the handle is rounded so that it does not hurt your hand when you exert yourself.
The pearl texture is my favorite Weight is Large, but I like it better because it doesn't show scratches.
As long as you like the way it looks, I think it is the highest Level Spanner as its reputation suggests.
View detail
an Open-end Combination Glasses and one-set Size 持 -- ます -- -- this Series 10 is too famous as an Open-end Spanner of both the heads. Jo is a cut of the thin mouth and is easy-to-use also in a narrow part. When it kicks in a Torque to a fo
an Open-end Combination Glasses and one-set Size 持 -- ます --
-- this Series 10 is too famous as an Open-end Spanner of both the heads.
Jo is a cut of the thin mouth and is easy-to-use also in a narrow part.
When it kicks in a Torque to a forward direction unlike spear type Jo of
JIS, it is the form quite obvious which is devised in the direction which Jo's mouth closes.
Fundamentally, although an Open-end Spanner turns the Nut which exists in the middle of an axis and the part which uses a Mirror stay, Brake piping, etc. is restricted in maintenance of a Motorcycle,
Since it cannot work if such parts are not Open-end Spanners -- It is better to arrange briefly, since two dishes of Open-end Spanners of the same Size may be needed depending on the case although it is sufficient for at least one Combination.
It satin[ a Grip and ]-finishes [ of a
I character cross section ] up, and no fault is found.
View detail
an Open-end Combination Glasses and one-set Size 持 -- ます -- -- this Series 13 is the standard size of a Combination Wrench, and has become a cut of the thin mouth same as a Spanner as Series 10 of an Open end. since the direction of the Long ty
an Open-end Combination Glasses and one-set Size 持 -- ます --
-- this Series 13 is the standard size of a Combination Wrench, and has become a cut of the thin mouth same as a Spanner as Series 10 of an Open end.
since the direction of the Long type of Series 14 is user-friendly using a Garage and this is a lightweight Compact -- mainly -- in-vehicle -- it uses as business.
It is although there is also turn in a Garage when two Spanners of the thin mouth of the width across flat are needed occasionally. -- It satin[ a Grip and ]-finishes [ of a
I character cross section ] up, and no fault is found.
View detail
You may be very easy to grasp the dent of the grip portion which is the feature of a Stahlwille. Since a high tool is high-precision, it can apply a Torque without hesitation. I think that a good tool should be used since I get the part tool which
You may be very easy to grasp the dent of the grip portion which is the feature of a Stahlwille.
Since a high tool is high-precision, it can apply a Torque without hesitation.
I think that a good tool should be used since I get the part tool which does not have technology in
amateur maintenance to help.
View detail
Although a 30-mm Flare Wrench does not have a choice in others, if it is a Stahlwille, dramatically, rigidity feels easy highly and it is choked with it.
Although a 30-mm Flare Wrench does not have a choice in others, if it is a Stahlwille, dramatically, rigidity feels easy highly and it is choked with it. View detail
It purchased in order to remove the Pipe of the Level gauge of AT of a Car. How many times does it do within a lifetime? Although it was work as ?, I thought that it could not do if it is not this tool. It is a Stahlwille truly!
It purchased in order to remove the Pipe of the Level gauge of AT of a Car. How many times does it do within a lifetime? Although it was work as ?, I thought that it could not do if it is not this tool. It is a Stahlwille truly! View detail
Satin finish of one eye single ended wrench long chrome plating processing of Stahlwille STAHLWILLE is used. It is failed to mutilate the superfluous flesh of a handle center portion, a weight saving is carried out, and it has a configuration which ha
Satin finish of one eye single ended wrench long chrome plating processing of Stahlwille STAHLWILLE is used.
It is failed to mutilate the superfluous flesh of a handle center portion, a weight saving is carried out, and it has a configuration which has reinforcement like an H-beam.
The weight saving is carried out so that it may become light that it is easy to grasp.
Since it does not slide on it although the direction of glasses is held by the hand stained with the AS-drive (field contact) type oil which does not hurt its bolt, it is [ that the structure which is a very easy-to-use tool is polite, strong, and ] wonderful, and good, but it is expensive.
View detail
Satin finish of chrome plating processing of Stahlwille STAHLWILLE is used. It is failed to mutilate the superfluous flesh of a handle center portion, a weight saving is carried out, and it has a configuration which has reinforcement like an H-beam.
Satin finish of chrome plating processing of Stahlwille STAHLWILLE is used.
It is failed to mutilate the superfluous flesh of a handle center portion, a weight saving is carried out, and it has a configuration which has reinforcement like an H-beam.
The weight saving is carried out so that it may become light that it is easy to grasp.
Since it does not slide on it although the direction of glasses is held by the hand stained with the AS-drive (field contact) type oil which does not hurt its bolt, it is [ that the structure which is a very easy-to-use tool is polite, strong, and ] wonderful, and good, but it is expensive.
View detail