Reviews
Great tool set makes working on my bikes easy.
I like these wrenches.high quality, japaned made,feeling hand perfect.the cost is right and works fine They are quick and easy to use and I keep them with my tool box.The length is sufficient. It is not too long. It fits in the tool box. It is quick and easy to check tightness of almost every bolt on my bike with these while riding or servicing my bike.Wish they offered a set with 7mm and 13mm.Highly recommened. View detail
Convenient
We mainly use Hexa for quick turnaround.
Personally, I am still learning about fast turnaround, but once I get used to it, it will save me a lot of maintenance time.
View detail
They are the necessaries of [Webike-monitor] motorcycle maintenance. It is convenient when removing a cowl, a sheet, etc. 8, 10, and 12 were purchased by a set.
They are the necessaries of [Webike-monitor] motorcycle maintenance.
It is convenient when removing a cowl, a sheet, etc.
8, 10, and 12 were purchased by a set.
View detail
If T type handle is used after all, work speed will increase markedly. Moreover, since it is a socket different body, the socket of an adapters or each size can be used and flexibility is very convenient highly. I think that it is the optimal tool
If T type handle is used after all, work speed will increase markedly.
Moreover, since it is a socket different body, the socket of an adapters or each size can be used and flexibility is very convenient highly.
I think that it is the optimal tool for motorcycle maintenance.
View detail
Convenient
The special tool makes it very easy to remove the center cap of the Aluminum Wheel.
Lever is inserted by leverage and force is applied without difficulty, and even hard Caps are easily removed.
A dedicated tool is safer because the cap may be damaged if it is removed with a slotted screwdriver.
View detail
Peace of mind for normal use
Even with the Double disk Wheel, it doesn't get in the way and is easy to turn properly.
It's not as good as the no-name brand in terms of cost, but KTC has a sense of security, and I decided to go with this one.
It's not a high quality tool with BALI on the Grip, and it's not a tool that requires a great deal of precision, so if you're not particular about it, you might as well use an obscure product.
View detail
Speedup！
The 8mm version is mainly used for removing the front fender and engine covers.
The Bolt at the back of the room can be accessed more smoothly than the Socket+Extension.
The Slide Head Handlebar can be used in combination with the Slide Head Handlebar to do the same thing, but this dedicated product is easier to turn because the handle is just the right length.
It's no wonder that Motorcycle Mechanic use this Type a lot.
The only problem I have with it is that it is bulky when stored.
View detail
No.1 frequency of activity
If you buy it for the time being, it is the first of OKBrand, KTC's Soke T.
When it comes to Socket tools, I think most people think of Ratchet, but when it comes to actual maintenance, this one is often overwhelmingly easier to work with.
After all, it is easy to turn fast.
If you want to do it fast and easy, there are power tools, but this one is about one tenth of the price and does not require a power supply. It is also easy to grasp the condition of the screw part by hand and to manage the hand torque.
It's used so often that it's used almost 100% of the time for Motorcycle maintenance.
Usage (depending on the individual's arm strength). I think it can be loosened and tightened up to M8 bolt.
More Torque is a bit tougher.
Also, if you use 9.5sq Ratchet to tighten Bolt under M6, it tends to be too rigid and overtorque, but if you use this one, it is relatively easy to adjust. (It takes some getting used to, of course.)
The balance of the length of the handle is also good, and it is usually recommended though KTC is a little high though it is sold at various prices from various manufacturers as T Len.
Also, the joint part is welded, but I myself use it in heavy youth and many people around me also use it, but I have never seen it broken, and I think it is reliable enough.
View detail
SmallSize
It comes in handy when removing the Cowl.
It's great for quick work, loosening and twirling in the palm of your hand Size.
It is small and easy to handle.
View detail
It's handy to have.
Convenient for removing Cowl, etc...when you want to remove Bolt quickly.
It's also Wallet-friendly because you can recombine them if you have the right Socket.
View detail
Good texture
I used it to replace the Rear Sets and Exhaust System. It seems to be useful in the future if I have one. View detail
When you don't need to use Ratchet.
I use it for the drain bolt on my Axis Treat commuter Special Knife. I often use it sloppily when I don't need to use Ratchet. View detail
To remove the center cap.
Easy to remove the center cap of the Aluminum Wheel with the Lever, which makes it easy to remove even the hardest caps, while the slotted screwdriver may cause damage to the cap, but it can be removed efficiently at two different angles. View detail
Thick and not suitable for fast turning.
The grip is thick. This thickness makes it difficult to turn quickly and is used infrequently. It is not easy to turn the tool quickly. The Grip is not a perfect circle, so it is easy to use. This tool is used only for that purpose. View detail
The best
I think KTC and ko-ken are the twin peaks of TWrench. For my own taste, I like the 8mm slimmer than the KTC. It has the right amount of flexure. The rotating balance is also perfect, as the Nepros are too expensive for the average person to afford. That's enough. View detail
It's pretty normal
I'm using the DRC one, but I wanted to try the KTC one and bought it DRC's is definitely better in terms of ease of use! 。 I thought it would be easy to use because of the thick body part, but the thickness of the body part was a problem and was difficult to use I don't regret it too much because the price is so cheap, but … View detail
To regrettable shopping ...
I am using the Air valve core driver of DRC, but I have purchased this thing because this thing is KTC when I am exploring what is for carrying.. I immediately tried to use it when exchanging the Tire, but it has become a product that is completely dissatisfied with having it at all. First, although it is a part of the handle to rotate, because it is wide, it makes it hard to move your hand to use with Spoke wheel. And, although it is the part turning Valve, since KTC 's thing can not turn unless Valve is pushed in, air will leak when turning. If you are using this product please try using DRC's. I understand the difference. View detail
Easy to use!
I used a combination of Sliding bar and Extension bar
This one is light and balance is good so it is very easy to use.
I wish I bought it sooner.
I often used Ratchet wrench, but from now on it will be Main.
Moreover, it is cheap!
View detail
Satisfied with Cospa
I am satisfied with COSPA.
Just because I am a personal opinion, I'd like to make it a reference level, but I wonder if the part of the stick is a little thin... ?
I feel a little thin, I can not turn it a little.
I wish I had made it a bit thicker...
View detail
Satisfied with Cospa
I am satisfied with COSPA.
Just because I am a personal opinion, I'd like to make it a reference level, but I wonder if the part of the stick is a little thin... ?
I feel a little thin, I can not turn it a little.
I wish I had made it a bit thicker...
View detail