Reviews
Fits: HONDA CB50, HONDA MONKEY, HONDA DREAM50, HONDA DREAM50, HONDA DREAM50, HONDA SUPER CUB 50, HONDA GORILLA, HONDA APE 50, HONDA APE 100
It is used infrequently.
It is still easier to use dedicated tools. View detail
Convenient
We mainly use Hexa for quick turnaround.
Personally, I am still learning about fast turnaround, but once I get used to it, it will save me a lot of maintenance time.
View detail
Not necessary unless you really need Torque
This is good for those who have room in their toolbox.
I bought it to remove the bolt from the undercarriage, but I had to use a torque wrench to tighten the bolt in the end, so this may not have been necessary if I had a Universal.
View detail
For Torque wrench use
The DRC Sprocket bolt was loose and I wanted to use the Torque wrench to tighten it just in case when I replaced it with an OEMBolt nut. I bought it because I wanted to use the Torque wrench to tighten the Sprocket bolt nut when replacing it with the OEMBolt nut, just in case. View detail
Motorcycle and car dual use
The Size is 19mm17mm21mm, and it is easy to apply force and convenient. I was able to loosen Bolt which is hard and not loose.
I think it is a good product to buy if you plan to use it for your car as well because you can use it for Tire replacement of your car.
View detail
Stem bearingGrease up
This is the first time to use the Torque wrench to check the stem. It is half the price of the sst and is a universal product, so the R is loose and a little hard to get used to.
Quantity before Marking and Rose Si to Stem Nut:Pair (for Left and Right) Fix a little harder by loosening the torque within 90-degrees from the specified torque, relying on the feeling of cutting to
If you mark the Stem Nut, you can adjust it with the Hook wrench and the hand torque next time. It is better to have it to manage the high torque of the ThirdNut.
View detail
Fits: HONDA NSR50, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
To use
I used it to remove the Clutch from my cb750f. It was quite hard, and I managed to loosen it, but the socket side was slightly distorted. Because the frequency of use is also small, I think it is good. View detail
3
I bought it to adjust my SUPER CUBc100's valve clearance.
The tool to adjust the square clearance is good, but I think regular glasses are better as they are hard to turn when tightening the 9mm Nut.
I thought it would take some getting used to.
View detail
Thick and not suitable for fast turning.
The grip is thick. This thickness makes it difficult to turn quickly and is used infrequently. It is not easy to turn the tool quickly. The Grip is not a perfect circle, so it is easy to use. This tool is used only for that purpose. View detail
It's a shame
Time is of the hour, kowa tools like Large, but this Twrench 12 is the tip The box outer diameter is a little bit large. Because of this, KTC and koken's Twrench can be used and this Twrench cannot be used. Situation. You can say that durability is important, but there are many situations where you can't use the situation in the first place. It is. I'm sure it was good in the past, but as the years go by, ToolSpace is getting tougher and tougher. It's a shame, because the quality of the thing itself is high. 。 View detail
Big Nut and cheap
I usually use Socket wrench
I didn't have a Socket to remove the Nut or Bolt of this size, so I bought it
However, the clutch lock nut has a high torque, and it was difficult to put pressure on it because of its shape Difficulty
Maybe I should have bought the Large KiSocket, even if it was a little expensive
View detail
Fits: HONDA CB50, HONDA MONKEY, HONDA DREAM50, HONDA DREAM50, HONDA DREAM50, HONDA SUPER CUB 50, HONDA GORILLA, HONDA APE 50, HONDA APE 100
Would you like to be without it?
I bought these glasses after watching a video of someone else using them, but they're a great pair of Offset large glasses Wrench and Driver are easier for me to work with
The price is pretty high, too
View detail
Sorry again
I haven't used this one either..
But it's absolutely necessary, because I definitely don't want to be covered in scratches with Gold genus Wrench
Cosmetically, it's a good product and not a bad buy
I'm not using it, though
View detail
It's pretty normal
I'm using the DRC one, but I wanted to try the KTC one and bought it DRC's is definitely better in terms of ease of use! 。 I thought it would be easy to use because of the thick body part, but the thickness of the body part was a problem and was difficult to use I don't regret it too much because the price is so cheap, but … View detail
Fits: HONDA CB50, HONDA MONKEY, HONDA DREAM50, HONDA DREAM50, HONDA DREAM50, HONDA SUPER CUB 50, HONDA GORILLA, HONDA APE 50, HONDA APE 100
It is convenient to have
I used it for 12-inches' Honda mini bikeCustomRacer.
Because there are several Normal heads of APE, NSF 100 □ Purchase Set Items.
It is convenient to have.
View detail
Tappet Adjust Wrench
In order to Overhaul Engine of MONKEY, we decided to purchase special tools one by one.
First of all, I bought to adjust the Tappet first, but when TopScrew turns a little Small turning Handlebar a little it will be turned around and it will turn around a bit and when you measure the gap it narrows slightly or put a little effort and endure it If you do, you need to spread and get used to it. I think that there is no difference in the amount of any goods, but I chose this as a reliable Brand. I think that practice is also a pleasure for Custom.
View detail
Fits: Others CUB ,CB50,MONKEY,GORILLA,APE50,APE100,DREAM50 (AC16/15,AC07),KITACO Ultra head,KITACOAPE series SPLHead
Since it was exhaust steam side and intake-air side 0.14 0.12 to a 20,000-km run, it adjusted using the article here.Using for the SuperCUB110 is on the 9-mm side. The touch and the result which were used are good.Although the knurl process o
Since it was exhaust steam side and intake-air side 0.14 0.12 to a 20,000-km run, it adjusted using the article here.Using for the
SuperCUB110 is on the 9-mm side.
The touch and the result which were used are good.Although the knurl process of
, however the place which it tool
of the direction which carries out Adjuster adjustment Has is carried out, when it fastens and is crowded with a Wrench being conscious of bolting Torque 9 N-m, it slides together and adjustment shifts.
It has grip 55 to 60 kg, and just like men in general once.
Even if it grasps strongly intentionally, it has and withers.Since it is , if it loosens several times, it adjusts and a check, and time and effort and practice are required.
If it gets used, it can take out on the dot, but I think whether it is all right to buy a thing with a large place in which the above has trouble and a direction to worry.It is setting of price with a generally higher after [
] KITACO.
View detail
He bought it, in order to remove a Chain cover.Since a Bolt was not just going to enter by the ordinary Wrench, it was very helpful.Since a price is not high to there, either, it is good.
He bought it, in order to remove a Chain cover.Since a Bolt was not just going to enter by the ordinary Wrench, it was very helpful.Since a price is not high to there, either, it is good. View detail
[a Webike Monitor] -- as a tool, it became brave -- I make and come out and think that it is infallible. However, this T type had little number of times of a work part being restricted, having considered, having depended and using.
[a Webike Monitor] -- as a
tool, it became brave -- I make and come out and think that it is infallible.
However, this T type had little number of times of a work part being restricted, having considered, having depended and using.
I think that it will be a good tool if the place where it had few places which can be used than expected is extracted since it is KTC which is merely reliable and a Torque can also be applied firmly.
View detail
[Webike Monitor] It purchased to the Fittings of the Brake hose. The thing of SIGNET is cheap anyhow. And yet, since it is quality, it is a Recommendation. There is also wall thickness and rigidity is also enough.
[Webike Monitor] It purchased to the Fittings of the
Brake hose.
The thing of
SIGNET is cheap anyhow.
And yet, since it is quality, it is a Recommendation.
There is also
wall thickness and rigidity is also enough.
View detail