Reviews
Ideal for Driven Sprocket Nut
I purchased the 12mm to replace the Driven Sprocket on my KLX125.
As a result, I am satisfied with Large!
If you have ever replaced the Driven Sprocket on a KLX125, you will know that when holding the Nut on the Driven Sprocket, the Neck is where the Rim/Tire is located.
LongGlasses/Spanners interfere with the Rim/Tire, so the tool must be hung on the Slant, while ShortGlasses and normal length Spanners are too short to hang the Torque.
I had been using Long spanner, but I thought it was not a good idea, so I bought this one.
Good point #1.:Moderate Offset
The handle and Glasses section are moderately offset so that the Nut can be held without interfering with the Rim/Tire.
Good point #2.:thin
Related to (1), it is made thin and does not interfere with the Rim/Tire.
Good point #3.:No counterbore in the Glasses area.
They have eliminated the counterbore, so the Nut can be held firmly even at this thinness.
Good point #4.:Simply cool
I like UNIT tools and have several of them, they are cool.
The ruggedness of the black color, the UNIT logo shining on it, and the gentleness of the handle covered with rubber.
It's a hobby of mine, but I just can't get enough of this coolness.
It is not so frequently used for personal use, but it is very useful when replacing a Driven Sprocket! It is a very useful tool when you need to replace a Driven Sprocket.
When in doubt, buy. Please try it out at Su Chest in
View detail
Great tool set makes working on my bikes easy.
I like these wrenches.high quality, japaned made,feeling hand perfect.the cost is right and works fine They are quick and easy to use and I keep them with my tool box.The length is sufficient. It is not too long. It fits in the tool box. It is quick and easy to check tightness of almost every bolt on my bike with these while riding or servicing my bike.Wish they offered a set with 7mm and 13mm.Highly recommened. View detail
A gem and a masterpiece
Replaced a set of 4 KOWA T-Type Wrench up to 8,10,12,14 after several years.
Although I have been working with KTC and Kohken, I can say again that KOWA is the best fit for TWrench.
According to Large's senior maintenance staff, in the past, whenever the Japan GP was held at Suzuka, overseas mechanics used to come to Large's tool shop to buy only KOWA's TWrench, which makes sense.
There are a few important areas in TWrench, but the welds are weld treated or there is no spatter on the weld bead at all as shown in the photo.
This smoothness leads to a sense of security while working, because it is the soft area between fingers that touches here.
The surface treatment is pear-shaped, and when wiped with wet tissue, the finish is such that the fibers are uprooted.
Everyone may have their own preference for the center of gravity balance, but in my opinion, this position is one answer to the question.
Although there are now products that exceed the thinness of the Socket, they seem to have settled on a balance of sufficient strength and thinness without pursuing excessive thinness that is not necessary.
In fact, I have never encountered a situation where I would want to use TWrench that would not be Accessible with this thinness.
The slimness that fits comfortably in your hand, the length of the handle, the length of the arm, the thinness of the Socket, and the center of gravity are all excellent, and I will probably keep buying the same one even if this one breaks in the future.
View detail
Made by DAYTONA because there was no Size for KTC's one.
Until now, KTC's L-Type Quantity:It was opened and closed by twisting and turning it with Set's.
I had been thinking of getting a Type T for some time, but had held off because I thought the work time would be much the same.
However, as I got older, I changed my mind and decided that I wanted to have as much fun as possible, so I took the plunge and bought a frequently-used Size one.
We mainly use KTC tools and wanted to get the same Manufacturer, but there were no sizes available, so we bought DAYTONA tools.
It is as easy to use as KTC, if not easier, and the T-type could have been made by DAYTONA.
View detail
Fits: HONDA glom, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB
First time I've used it.
I have been adjusting the Tappet on this type of Honda quite often, but I have never used this type of tool before, so I bought it to try it out.
I use it on my race car and it helps me cool down the Engine between practices and make quick adjustments.
I regret not having used it before! I didn't think so, but it is so useful that it has become a regular in my tool box.
View detail
It's okay if you don't have it, but if you do, it might be useful for something.
I'm a Cross wrench for Automotive for Tire.
There will come a time when it will be of some use. (Lol)
In the meantime, it is more convenient to use a cross wrench for stubbornly hard nuts, etc., because it is easier to apply force to them.
View detail
PRO Tool.
This is a nifty tool from Pro shop Technics in Suspension, if you don't want to put a Wound on the Top cap. View detail
Used for Overhaul of Front fork.
There is just a little bit of BALI on it, so it might be better to finish it with a light file before use. 。 It is made of Engineer plastic-like hard material, so it won't nudge Cap's head unless it is very hard to do so. View detail
Longed-for Kowa T-Type Wrench
Cheap and easy to use, Commendation but not easily distributed. View detail
Fits: Others CUB ,CB50,MONKEY,GORILLA,APE50,APE100,DREAM50 (AC16/15,AC07),KITACO Ultra head,KITACOAPE series SPLHead
To use
I was worried about the poor rating, but it works just fine. (I'm a mechanic.)
You can adjust Tappet without it, but it is useful to have it.
View detail
I can use it
I recommend it because it is easy to use. View detail
Fixed Type is good.
It looks a little cheap, but the Fixed Type is easy to use.
I have a Free one, but it comes off during use, so I will use this one.
View detail
Fits: HONDA , KAWASAKI KSR110, KAWASAKI KLX110, HONDA MONKEY, HONDA APE50
MINIMOTO key set
The tool is solid, the design is excellent. I took to adjust the gaps on my mopeds.
I liked everything, nothing to complain about. -------------------------------------------------- -------- The tool is solid, everything is fine in constructive. I took it to adjust the gaps on my mopes. I liked everything, there is nothing to complain about. Powered by Google Translator
View detail
Great
Great exactly what I need for fjr. It smells like an old item but its well oiled & kept. Parcel came in very well packed too though delivery took some time. View detail
For Torque management of Stem Nut
I used it to tighten the Stem Nut on my ZX14R. It is essential for tightening because it can be used in combination with the Torque wrench to manage the Torque.
Stem Nut is a large thing because the handling changes depending on the degree of tightening.
View detail
Fits: Others CUB ,CB50,MONKEY,GORILLA,APE50,APE100,DREAM50 (AC16/15,AC07),KITACO Ultra head,KITACOAPE series SPLHead
Extremely Convenient Tool for Adjusting the Valves on the Grom
About quality and texture: I am happy with the quality of tappet adjustment wrench from Kitaco. Made from steel with a durable surface coating and sized for easy handling and good access. About the feeling of use: This tool is extremely convenient for adjusting valve clearances on the Grom and is compatible with 8mm and 9mm nuts so is suitable for use on the Honda head, SP Takegawa head and Kitaco head. Products to buy together: More tooling from Kitaco would also be desirable to purchase along side the tappet adjustment wrench for maintaining the Grom. Difficulty of installation: The process to install takes only a minute and is not difficult to do once you have gained access by removing the tappet covers. Cost performance and comparison with other products: Good costing as you are getting a quality made tool that can be used on multiple types of tappet sizes and the pricing almost the best value, only to be beaten by the wrench set from MiniMoto. About shipping and packaging: Sea frieght was my perferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you are looking for a complete specialty tool set to work on the Grom then you may want to take a look at the MiniMoto monkey engine special tool set. View detail
Fits: YAMAHA Cygnus X, YAMAHA CYGNUS125 [Cygnus]., YAMAHA CYGNUS125 [Cygnus].
Wish I had used it sooner!
[How is it used?
I had been using a universal holder to remove the Pulley, but I was frustrated that it kept coming off, so I decided to purchase this product since it has a crown.
Was the one you received as per Image?
The Grip part is covered with Rubber, which is good because it feels less likely to get Wound on it when it comes in contact with the Clutch part.
The bend of the handle is just right.
How was your experience with it?
Pulley removal was done with the center stand and tightening was done with the clutch.
Torque is firmly applied without spinning.
[Points to note]
We made sure to put the teeth firmly on the crown of the Pulley.
How did it compare to other products?
It was a step up from the Universal holder.
View detail
Used for SEROW250
I used it to replace the stem bearing on a SEROW250.
I think the hook is a little shallow, but it worked fine.
View detail
Adjustment of Suspension
[How is it used?
I used it for Rear Suspension of XJR400R.
It is originally included in the on-board tool, but my XJR has not had an on-board tool since I purchased it and I have not been able to adjust it.
Was the one you received as per Image?
It was as per Image. Quantity to Adjustment:Quantity:I bought 2pc
How was your experience with it?
I adjusted it for the first time and it was quite challenging and difficult to grasp the hang.
[Points to note]
Be aware that the tool may hit the body or Silencer during adjustment, which may damage them.
How did it compare to other products?
I have not done this with other products, but I feel this product is fine for the price and can be adjusted well.
View detail
They are the necessaries of [Webike-monitor] motorcycle maintenance. It is convenient when removing a cowl, a sheet, etc. 8, 10, and 12 were purchased by a set.
They are the necessaries of [Webike-monitor] motorcycle maintenance.
It is convenient when removing a cowl, a sheet, etc.
8, 10, and 12 were purchased by a set.
View detail