Reviews
It is largely satisfactory
YB-1 (2st) It's a special tool for Casting Iron, so I used it to remove and install the exhaust system on my The size was perfect and felt comfortable in my hand Since it is an universal tool, it is hard to run into the screw part and it is thin and hard to turn It is a very good product The price is inexpensive at about 2,000 yen, so you can feel secure if you have one View detail
Sorry again
I haven't used this one either..
But it's absolutely necessary, because I definitely don't want to be covered in scratches with Gold genus Wrench
Cosmetically, it's a good product and not a bad buy
I'm not using it, though
View detail
Beware of those who replace the Plug with TL125
TL125IHATOVO or later MODEL's, purchase to Plugfor Replacement I did
However, as a general comment, the Plug could not be replaced
View detail
It's pretty normal
I'm using the DRC one, but I wanted to try the KTC one and bought it DRC's is definitely better in terms of ease of use! 。 I thought it would be easy to use because of the thick body part, but the thickness of the body part was a problem and was difficult to use I don't regret it too much because the price is so cheap, but … View detail
The peace of mind and cost effectiveness of an OEM
Hook wrenches are hard to use if the size doesn't fit, but the WR250R's I bought it because it was recommended in the Service Manual for maintenance and because it was recommended in the Service Manual Because it is only OEM, there is no size that does not fit, and Slotted It's not as mentally unpleasant as poking Small with a screwdriver, and it's safe to use I think The build quality is good, but it's solid It is a little thick, so it may be difficult to fit in some places View detail
YAMAHA OEM Steering Nut Wrench
I want to share a review of the key I recently acquired. I had a problem with driving a motorcycle. As it turned out, a preload of the steering mechanism was required. But for this you need a social key. After a long search, I found it. It turned out to be the YAMAHA company key. This is a great tool without which you can not do. I recommend this product. View detail
Good tool for motorcycle
I have long thought to buy a key like this, but I could not find it ... I found it, but it's not that. And finally found it! I bought this key specifically for the helmsman for the Yamaha R1 2005. And honestly I do not regret, I recommend! This key can be clamped with a dinomitric key with the desired tightening. View detail
Fits: HONDA NSR50, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Without this ... not beginning
With the incorporation of DAYTONAMONKEYHydroClutch, you must not tighten Nut with this.
It will be very helpful if you come with Clutch Kit Mr. DAYTONA (Lol)
View detail
To regrettable shopping ...
I am using the Air valve core driver of DRC, but I have purchased this thing because this thing is KTC when I am exploring what is for carrying.. I immediately tried to use it when exchanging the Tire, but it has become a product that is completely dissatisfied with having it at all. First, although it is a part of the handle to rotate, because it is wide, it makes it hard to move your hand to use with Spoke wheel. And, although it is the part turning Valve, since KTC 's thing can not turn unless Valve is pushed in, air will leak when turning. If you are using this product please try using DRC's. I understand the difference. View detail
Extremely convenient
Useful when removing Fork top cap.
Exact length and moderate hardness.
Top cap is not scratched.
It is recommended for those who are regularly serviced.
View detail
It is easy to ♪
Bolt which I licked a bit with MONKEY before, was able to be removed comfortably.
We reduced the scrap of ☆ by ease of use considering the storage surface.
After all the work is easy if the tools are good.
View detail
Convincing
I bought it for forming FIMONKEY 88 cc.
The texture of Plating is also a pricey thing, it is okay.
It is also a problem of familiarity but the round Knob on the Adjuster side is a bit more Large
Gap decreases when locking, it is likely to decrease the number of readjustment of Tappet.
View detail
Compact - - - (Lol)
It is thin and short, and the feeling of use is a bit sick.. It is not suitable for heavy use like sticking in Tool Box and using it safely. Well, as it is not so used, "Keep it for emergency" That's enough. I think that it is also suitable for impersonating with an on-board tool. View detail
The hand reaches the itchy place
Yin 125's 19in. From Wheel to 17in. If for MOTARD you can not immobilize perfectly with Spoke or Tire in commercially available glasses Wrench with RSprocket exchange. I thought that it was from the gap of Spoke using Box wrench, but because the position of Nut is closed by Spoke on the other side, it is troubled, where I found out that it is released from Unit and purchased. (Purchase 12 mm)
Thin type, bending condition avoiding Sprocket and Tire, making it difficult to work - - -
Steel, but I do not know if it is quenched like a commercially available tool. For durability in the future, impossible → possible. Do you say that the hand reaches the itching place?.
I am satisfied with COSPER.
View detail
Fits: HONDA NSR50, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
A tool which is not substitute
I used it for Clutch exchange.
There is no discontent at all, such as engagement condition and strength.
Although it is not frequently used, there are no substitute tools. It is safe to put it in the tool box.
View detail
Take this wrench in your hands and feel the wonderful quality of this perfectly made Kowa tool. This should definitely be in your tool box when you work on motorcycles.
Take this wrench in your hands and feel the wonderful quality of this perfectly made Kowa tool. This should definitely be in your tool box when you work on motorcycles. View detail
The look and feel of this 45 degree offset wrench is easy to describe: simply perfect. Take it in your hands and you know what I mean. It is perfectly chromed and polished - a pleasure to work with.
The look and feel of this 45 degree offset wrench is easy to describe: simply perfect. Take it in your hands and you know what I mean. It is perfectly chromed and polished - a pleasure to work with. View detail
Easy to use!
I used a combination of Sliding bar and Extension bar
This one is light and balance is good so it is very easy to use.
I wish I bought it sooner.
I often used Ratchet wrench, but from now on it will be Main.
Moreover, it is cheap!
View detail
it's beautiful
There are two Drain bolts in ZEPHYR 1100, one of which is after exchanging outside the company
I did not desorb and detached and I was using other company's products but I think that this one is superior in accuracy and purchased
Did.
Using Torque wrench at tightening will somehow fit into Limit.
Besides, the texture is wonderful so I am unaware that I am feeling the feeling.
View detail
Satisfied with Cospa
I am satisfied with COSPA.
Just because I am a personal opinion, I'd like to make it a reference level, but I wonder if the part of the stick is a little thin... ?
I feel a little thin, I can not turn it a little.
I wish I had made it a bit thicker...
View detail