Reviews
Expect durability
I bought this because my long-time Socket was getting a little licky. 900SS Cowl removal is 4mm, so I use it a lot. I tried it out right away and the new one chews very well indeed, no more worries about Bolt licking it. View detail
Just the right length and very convenient
[How is it used?
Purchased to replace Oil in PCX125.
PCX is a little difficult to work with due to the position of the drain bolt, so I bought it to work more efficiently.
Was the one you received as per Image?
It is just as shown in the Image. It is just the right length, not too long and not too short. I felt that the texture is also good.
How was your experience with it?
I actually used it only once to change oil, and I am glad I chose the smaller size. There was a longer size as an option, but if I had chosen that one, I thought that I might not have been able to use it under a car body without space, so I am glad I chose the shorter one.
[Points to note]
Sometimes just a little bit of the tip is left on the Bolt side. However, it is usable without any problem, so Large is durable.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
handy tool
I bought this DAYTONA long hexagonal socket from webike. It is a set of 7 pieces equipped with a 3/8 socket of 8-19MM. The socket is extended to 63MM to screw some deeper screws. A socket bracket is also given as a gift to store these sleeves well. The steel is of good quality and should last for a long time. -------------------------------------------------- -------- The DAYTONA long version of the hexagonal sheet I bought at Webike. It is a 3/8 sleeve with 8-19mm. The sleeve is extended to 63mm to twist some deeper screws. A socket bracket can also be given a good storage of these sleeves. The quality of the steel should be used for a long time. Powered by Google Translator View detail
DAYTONA 4 In 1 Hex Socket
About quality and texture - Top quality. Durable coating on socket keeps it looking in as new condition and the tool has a heavy feel to it indicating it has a solid steel construction. About the feeling of use - I misplaced my OEM single sized hex socket for my Buell and since OEM parts are now hard to come by the multi sized hex socket from Daytona is doing the job now for my Buell and and future motorcycles with any of these 4 sizes. Products to buy together - A breaker bar and torque wrench are needed to work along side this hex socket ti get the wheel removal and installation done correctly. Difficulty of installation - The hex socket is very easy to use, just fit the end into the axle with your needed size (Buell rear axles pictured for 24mm hex) and loosen or tighten as required. Cost performance and comparison with other products - Pricing is great for a multi fit tool that you can use for many applications. Can't find any issues with the quality, so don't look elsewhere if you are requiring this product. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - If you are looking to add a breaker bar or torque wrench to use with this hex socket you will be needing a 3/8" drive tool. View detail
Reliable DAYTONABrand with high accuracy
I bought this product because it is a trusted DAYTONABrand. When I used it, I felt that the Bolt did not tamper and was very accurate. View detail
Yoshi Yoshi
I bought it because it is an inch size that I use occasionally, and I thought it should be inexpensive. 。 The texture and precision are not as high quality as the price, but I think they are sufficient for general work. 。 If you use it frequently, you will probably be dissatisfied, but if you buy it on the understanding that it is inexpensive, it is a very good product. View detail
Yoshi Yoshi
It's an Inch size that I use occasionally.
I bought it because I thought it was cheap enough.
The quality and precision of the product is not as high quality as the price.
I think it is sufficient for general work.
If you use it often, you'll probably be dissatisfied, but it's a good, inexpensive option.
It is a very good one if you are willing to buy it outright.
View detail
For Motorcycle Maintenance
[How is it used?
I was in a hurry to purchase this product because Bolt was used in one place during maintenance to stop tinkering.
only after careful inquiry Bolt with hexarobular hole I learned that it is called
Was the one you received as per Image?
As shown in the photo, this Socket can also be used for Type with Pin at Center.
Why does it say that it cannot be used for without Pinned Type?
How was your experience with it?
Until you use it. Are you sure this is what you want?" I was a little worried, but I was able to use it without any problems.
I don't know if Bolt is bad, but I was a bit concerned that the application was a bit shallow. I don't know if the bolt is bad or not, but I was a little concerned that the bolt was too shallow. I don't remove it too often, so it's enough.
[Points to note]
Quantity:It may not be a good fit for the Set but the Size is not abundant.
I think it is a common Size used for Motorcycle, so I don't think it is a problem, but for other uses, I think it is safe to look into Size.
How did it compare to other products?
Is it possible that the strength and precision of the tool is not as good as that of a well-known tool manufacturer? I think.
Well, I personally thought it was quite inexpensive, so if you use it infrequently, it's totally possible.
【Review】
It can be used enough for Motorcycle tamper-proof Bolt.
It was a special Bolt tool, but it was less expensive than I expected.
View detail
Frankly
[How is it used?
I had a hexagonal Socket for motorcycle maintenance, but there were places where I couldn't use it for long periods of time, so I bought a new, shorter one.
Since I use a different one in Main, I chose the inexpensive and reliable DAYTONA one for now.
Was the one you received as per Image?
As you can see in the picture, it comes with a socket holder, so you don't have to worry about storage.
How was your experience with it?
The Socket and Holder are fixed too Firmly, so it is a little difficult to remove the Socket of each Size. I think this is the difference from famous manufacturers. I think that is the difference from famous manufacturers.
As for the usability of Others, it is quite normal.
There were no particular problems with Bolt or the tool licking.
[Points to note]
I don't want to make a mistake! If you don't want to make a mistake, I think it's safe to choose a good tool manufacturer. (This is not to say that this product is not good.)
I think the precision of the engagement with the bolt and so on is different. I don't know.
How did it compare to other products?
Compared to the one I have, the Socket felt hard to remove.
If you are a frequent user, this may be a bit of a concern.
【Review】
It is inexpensive and the quality was fine.
If you want to tinker with Motorcycle on holidays, you can use it without any problem.
View detail
Helpful Items
Used for special LongCap Nut.
I only use KTC or Koken for the Socket, but I chose it for the special LongCap Nut.
Both KTC and Koken have deep sockets, but the effective inner length is only about 11mm, which does not fit long Cap Nut.
And I remembered DAYTONA's Socket, I had other Size, so I looked at it … perfect hexagon to the back.
I was able to use it properly.
I only use it once or twice a year, but it's safe to have.
View detail
useful to have
It is used for the place where Ratchet wrench doesn't enter directly. 70mm to 150mm is necessary at least, and 150mm is purchased this time.
I use it rarely, but the price was reasonable, and it is convenient to have.
View detail
Used for TPSSensor removal and installation in carburetor
I used it to attach and detach the special bolt that holds the throttle position sensor in the overhaul of the ZrX1100 carburetor.
I don't think that the strength and durability are the same as a professional manufacturer like KTC, but for a light application like this, I had no problem using it, and I can recommend it to everyone.
View detail
I bought this for my Transporter.
I recently purchased a HUSQVARNA, so I bought this as a transporter. The necessary Size is arranged, and the quantity of the smallest limit is:I love it so much with Set. If you drive a foreign car, it is convenient to have one. View detail
Licked Bolt
I was having a hard time finding a solution to my problem... and then he recommended this product to me.
I was able to get it off in one motion.
View detail
Harley maintenance.
I usually use KTC millimeter tools, but I didn't have the Inch tool, so I bought this one.
It is completely comfortable to use.
It was nice to be able to use the Torque wrench on the Caliper Bolt as it also comes with a 10mm 12-angle.
View detail
For BMW cars "Necessities" Maybe
We'll use the dealership for a quick tune-up if you are a An unwanted item I think so
I am a I'm going to the dealership for a quick tune-up I bought it because I don't care for it
It can be used normally, but if you're looking for perfection "Mr. Tool Manufacturer We recommend that you purchase the Socket of
(Car models used:) BMW RnineT Urban G/S (e.g. "I'll be back")
View detail
Recommendations for Japan car users
BMW cars are "Ordinary Bolt, is not used in the visible part of the body and is not used to make small adjustments Hexagonal Wrench isn't going to cut it time, so I bought it out of necessity
It's an inexpensive tool, but so far it's worked normally If you expect perfection "Tool Manufacturer Buy tools from the
It's not too much to use for simple adjustments, so Good and
(Car models used:) BMW RnineT Urban G/S (e.g. "I'll be back")
View detail
DAYTONA Socket Set for Hexalobular Hole (Torx with Pin ( R))
This review is for DAYTONA Socket Set for Hexalobular Hole (Torx with Pin ( R)). The packaging was professional and webike’s Shipped price was unbeatable. The quality of each socket is great and the metal holder to keep them together and in order is a great bonus. It’s great to have a set of these torx with pin center sockets around as specialized tools like this can quickly derail a well intentioned project. View detail
For hexarobular holes (Torque(R) )Socket set
I purchased Torque because I do not have it. Because it seems that usage frequency is not so high, the price priority is given.
I feel that there is some rattling, but I could use it without problems.
View detail
Amateur enough
I bought it for the maintenance of Harley.
I am worried because the price is cheap, but it is on par with the amateur, but there are no particular problems even if it is used frequently.
I think that it is a problem Level that PRO does not have any problem.
I think that it will not be damaged by buying it.
View detail