Reviews
Replaced with a reliable manufacturer's product for future Motorcycle tinkering.
[How is it used?
I used to use a tool sold at Home center, but I was licking the Nut and so on.
We purchased this product as a reliable manufacturer's product.
Was the one you received as per Image?
Matte texture, Laser marking and was as per Image.
How was your experience with it?
The dimensional accuracy is also no problem at all, and it is good to fit Snap to Nut.
Matte texture also fits well in the hand.
How did it compare to other products?
It is a world of difference from the inexpensive tools sold at Home center. A little more.
I regret not buying it earlier.
Requests, etc. to Manufacturer
When the tool box is stored upright, it is unstable because of the protruding hinges,
I would like to see a structure that does not stick out.
View detail
3/8Deep socket
Other than that, it is usually possible to set the Socket to Quantity:I wanted a Deep socket since I have it as a Set. I purchased 6 types of this product for my needs of Size, 8, 10, 12, 14, 17, and 16 (Plug socket). 。 The Bolt and Nut are firmly supported when tightening and unfastening, and I felt a sense of security when using the Bolt and Nut. 。 Also, the size markings are clearly written, so they are easy to read. I just started using it, so I am not sure about its durability, but it is well made, so I do not think it will be a problem. 。 I am very happy with it View detail
Ordinary Socket
One day I looked at the Socket set and found that the 10mm was missing, which I assumed was lost because it was used so frequently.
I purchased the SK-11 as my first choice.
It came out of the tool box after purchase. I don't care how many I have, I will use it as a Socket for Touring's tools.
View detail
Expect durability
I bought this because my long-time Socket was getting a little licky. 900SS Cowl removal is 4mm, so I use it a lot. I tried it out right away and the new one chews very well indeed, no more worries about Bolt licking it. View detail
This eliminates the need to search for tools.
Rose and kept it in my toolbox. Separate from the tools for my main job,
It is stored in the Motorcycle garage. I use it by hooking it to the Neodymium Hook as shown in the picture, considering that it is easy to understand and within easy reach.
View detail
Easy to use
Purchased for Small TypeRatchet, cost performance is high with Holder set. Easy to use even in tight spaces. View detail
Purchased for Torque wrench
Purchased for Torque wrench. However, the Holder cracked rather easily if I didn't pinch it properly. View detail
Torque also has a Quantity:Set is convenient
I wanted a Torque set and found the other SK11Socket easy to use, so I bought this one. View detail
Maintenance
Quantity:I was contemplating the purchase of a set tool and it was on sale, so I didn't hesitate to buy it.
The glossy finish gives it a luxurious feel and the display is easy to read.
It is very useful for installation and maintenance of custom parts.
I think Spanner will be sufficient for some work.
The stop Bracket of the lid is easy to come off, so I made it functional Minus 1.
View detail
Necessities
Purchased for front axle shaft removal and attachment for tire replacement on GSX-R1000. It is very accurate, perfect fit, and safe to use. View detail
Is the length of the short method better?
I tried to make a 15-socket holder, but I didn't think about the length of the holder. I didn't think about the length of the holder, because it was about 30cm long, so I couldn't fit it in my tool box. 10-socket holders are available in the Quantity:2pc. I should have bought Set. But
It is definitely better than the Gold genus because it is made of plastic.
View detail
Poor mechanics buy toolsRose
9.The 5 tools were added in the Grip set since the number of tools has increased since the Rose purchase. The work is easy Plus No.2 Driver.
Only 1 pc.
View detail
I think it is very cosy. It is carefully made.
I have been using Quantity for many years now.:The socket adapter of the set finally broke. I was looking for a replacement, and this product seemed to be the cheapest and the most well-made, so I bought it. I bought it because it seemed to be the cheapest and well-made product I could find. It fits very snugly and is easy to remove, and I think it is very cost effective.
I don't know about durability, but it looks good, so I gave it 5 stars.
View detail
Used with Axle Nut
No problems with this product. I use it with Axle Nut on my off-road motorcycle.
For a moment I thought about substituting Pliers, etc., but then I thought, well, I'll just buy it and add another Socket! (Lol)
SIGNET is a Brand that I trust, so I chose them first based on cosmetics. The performance is also fine.
View detail
Size that fits in your hand
When held in the hand, the thumb and index finger naturally clasp the head of the Ratchet, and the thickness of the handle is just right, making it very easy to use. I am impressed by the structure of the switch lever, which moves smoothly and does not stop in the middle of the handle. View detail
Used for gsx-r1000
Purchased this product because OEM dedicated tools are expensive. The hex angles are highly accurate and do not rattle. View detail
Separated into A Parts and B Parts
Recently I have been adding a few more tools to my carryout for Touring. I put in the tools I use most often, but when I have them dispersed, I often have to look for them when I work at home. This time, I decided to purchase Proxxon's Exbur for taking out with me.
Here's a check of what I received. The length is as shown, the weight is 249 grams, and the bar alone is 185 grams. The finish is ChromeMatte, but the surface is not the large grain unevenness to prevent oil slipping. Before I bought it, I thought that the Slide would stop at the end of the bar and could not be completely removed. I thought that the Slide might get in the way when I used it on the X-bar, but if it is removable, it is large and sturdy. However, I thought that I should be careful not to lose the Slide when working on forest roads, etc. without it.
I actually used it with a Socket from another company attached. It was a little hard to remove the socket. The bar is made thicker, so it is heavier, but it is stable even when force is applied. I have been wondering if Exvar and Wrench could share the same functionality since they are similar in shape. It is good for taking out with me because I have four uses:Exvar, T-Type Wrench, normal Wrench, and Size Change Socket. I am glad I chose it because I can use it without any problems.
The size is described in the product description as "Laser processed" so that it can be seen in the dark. I thought the letters would look red in the dark, but they did not. I didn't feel that they looked particularly good in the dark.:Pair (for Left and Right) When the tool is moved to the "M" position, light movement marks are left on the Matte surface. It is natural for the tool mechanism to leave marks on the bar. If you like to polish and decorate your tools nicely, it may bother you. In my opinion, there is no problem as long as the tool is practical.
Proxxon is well known as a manufacturer of Small Type power tools. However, I did not know that Proxxon was a manufacturer in Germany, and that they also manufactured tools for cars and motor cycles. I felt that the standards in Germany might be stricter than JIS when I actually used them. This time, I purchased this tool regardless of the manufacturer because it is a tool that has multiple uses for an ex-bar. I felt that Proxxon should be included in the selection process when purchasing tools in the future.
View detail
For removal of Stem Nut
I bought this for removing the Stem Nut when replacing the Top Bridge on my GSX1300R HAYABUSA.
It works fine, and it costs about 2000 yen if you buy it at Home center, so this one is cheaper.
Info:(Japanese only)
GSX1300R HAYABUSAStem Nut tightening Torque:90N
View detail
Tool Manufacturer in Japan
The socket set was purchased 40 years ago from an unknown manufacturer. 14mm is the last one. I am not so particular about it, but I bought it this time because TONE is JapanBrand.
I don't know how to compare it to a no-name brand with a different price tag, but it is well made and has no wobble. The half pear shape also helps to reduce oil slippage, and I felt that the handlebar socket really shows off the performance of the handlebar. I am glad that I purchased a solid one because I will be using it a lot.
View detail
Very convenient... ♪
Good cosmetic.
If you have all of these, you will not have any problems with Large bodies.
View detail