Reviews
No Recommendation for general use
FOR JAPAN MODEL MAJORBrandKTC Hex socket Quantity:Set
”You want KTC for now, right” This is the first Hex socket I've purchased.
I often see Socket as ↑ but it didn't work for me.
This is because, as the product description says ”Bit can be replaced”, the Hex part (Black part in the picture) is stopped at Screw and is replaceable.
The tip of the Hex tends to wear out in heavy youth, so I think it's reasonable that it's replaceable.
But when you use it, this screw loosen and Hex part become rattling.
If you retighten it, it will stick firmly again, but after a while, it will rattle again…
Personally, I'm not a heavy youth like the Motorcycle guys, so the Demerit that rattles more than the convenience of being able to change the tip was Large.
So now I'm using another Manufacturer's cast-in? Type Socket is used.
I'm satisfied that it doesn't rattle.
If the tip wears out, I plan to replace the entire Socket with a new one.
As mentioned above, if you're not a heavy youth, Demerit is a larger size than Demerit, so I don't think it's a good product for the general public.
View detail
Fits: DUCATI PANIGALE V4, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 S
There is an error in the product description on Webike.
I looked for the Socket needed to remove the Large Center nut on the MVAGUSTAF3.
This product has a ProtectionRing and is thinly made so it is easy to apply Torque, 1/2-inches. (12.7mm) I bought it on Webike because it was listed as SQ so I could use it with my Wrench.
When I checked the item that arrived, it was 1/2" (12.7mm) Not, in fact, 3/4" (19.0mm) The product description on Webike is incorrect.
This meant I had to buy a Conversion Adapter, and by using the Adapter, the thinness didn't make sense either.
In fact, when I put it in the center nut, there was not much clearance and I beat it in with a platon.
It's OK that you don't have to worry about the contact surface with the wheel because of the protection ring, but it's a pity that this ring comes off soon.
As for the detachment of the center nut, it is fixed firmly, and I was able to put a large Torque without anxiety. This point is good.
Finally, when I removed the Socket, there was a Wound in the Center nut. I think it would be good if you could take a little more clearance.
View detail
Useless...
I put it on to power the Cigar socket in my car....
The result was an expected haGap.
[Was there anything that disappointed you?
This product is on the female side, and the other ornaments are on the male side, but the feel is too loose when you insert it. It was too loose to touch and was not useful.
Do you have any wishes or improvements you would like to make for the Manufacturer?
There are a number of Siga-Soke power supplies, but they should be standardized.
Please make a product that you can get into exactly ….
What made you decide to buy?
That it came with Harness to get the power from Fuse.
This was a nice point as I could easily get power from the Fuse box.
How was your experience with it?
As mentioned above, I discarded it right away because it had poor contact and would restart due to vibration.
Was the installation difficult?
As mentioned above, it comes with Harness, which gains + power from Fuse, so installation was very easy.
【Please tell me the installation point and hang】
It's a good, inexpensive product if it's in a vehicle or location that doesn't get much vibration and it works well with the MaleSocket.
[Included Parts:were they on?
I liked the fact that it comes with a Harness that gains power from the Fuse.
View detail
It was 3/4 Failure
I needed a 36mm Socket for my OHLINSFKS Top cap and ordered one
I was disappointed when I received it and noticed that the insert is 3/4 of the way through
When it comes to Motorcycle maintenance, I don't use 3/4 of it I have 1/2 of the largest in my hand
I went to the local tool store to buy a 3/4 to 1/2 conversion adapter for my trouble, and I got a 1/2 The 36mmSocket was sold for less than the conversion adapter
Read carefully before you buy
View detail
He has bought it by mistake.What was necessary was to often see the Size and just to have bought it.The things are wonderful goods.
He has bought it by mistake.What was necessary was to often see the
Size and just to have bought it.The
things are wonderful goods.
View detail
Although it is those who are liking and using Cau Ken's socket, about this hex socket, a using feeling is not so good. I think that the right and wrong of a tool also changing liking of people a lot will be that it is better a thing [ choose / the thi
Although it is those who are liking and using Cau Ken's socket, about this hex socket, a using feeling is not so good.
I think that the right and wrong of a tool also changing liking of people a lot will be that it is better a thing [ choose / the thing of KTC ] if a hex socket is purchased enough as the opinion of me and an individual although he plans to understand.
View detail